Manual do usuário Prismacolor CEILING MOUNT CB-200

Resumo do conteúdo contido na página número 1

Prismasonic Ceiling Mount CB-200 Prismasonic Ceiling Mount CB-200
Assembly Instructions
Ceiling Mount
CB-200
Installation Instructions:
Carefully remove and unwrap all the contents of box. Referring to the list
below, make sure you have everything needed to proceed with the
assembly of the mount. If any parts are missing, contact Prismasonic
immediately.
Parts list:
Ceiling mounting plate (1 pc)
Upper extension rod (1 pc)
Lower extension rod (1 pc)
Universal base plate connector (1 pc)

Resumo do conteúdo contido na página número 2

Prismasonic Ceiling Mount CB-200 Prismasonic Ceiling Mount CB-200 Assembly Instructions Assembly Instructions Introduction The long connector arms extending the projector's front edge are attached to the universal base In order to achieve a stable assembly, it is necessary to attach plate with cap screws, M6x10 and square nuts, M6 (example3), and to the rectangular plate of lens the projector body to the mount at least from the three spots. stand with cap screws, M6x12. Check that the lens

Resumo do conteúdo contido na página número 3

Prismasonic Ceiling Mount CB-200 Prismasonic Ceiling Mount CB-200 Assembly Instructions Assembly Instructions STEP 3 First align two holes on the lower extension rod at the suitable holes on the upper exten- sion rod, tighten them with cap screw, M8 x Important Notes! 55 and self-locking nut, M8. Use the two truss head screw, M6 x 5 on sides for locking the To ensure correct usage, please read this instruc- rods to each other completely (Fig 3). tions manual thoroughly. Keep this manual for