Краткое содержание страницы № 1
®
AVerMedia EB1004 BAK
Real-time Security DVR
Operation Manual
Краткое содержание страницы № 2
FCC NOTICE This device has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial, industrial or business environment. This equipment can generate, use and radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communications. However, there is no
Краткое содержание страницы № 3
WARNING TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION DO NOT DISASSEMBLE THIS PRODUCT.PLEASE REFER TO YOUR LOCAL DEALER IF THERE IS A PROBLEM.
Краткое содержание страницы № 4
Table of Contents Chapter 1 Introduction......................................................................3 1.1 Features and Specifications ........................................................................3 1.2 Front Panel..................................................................................................5 1.3 Back Panel ..................................................................................................6 1.4 Setting Up the DVR Unit.................
Краткое содержание страницы № 5
3.9 SENSOR SETUP ......................................................................................26 3.9.1 SENSOR RECORD TIME ................................................................ 26 3.9.2 ALARM OUT TIME ........................................................................... 26 3.9.3 CHANNEL-1 ~ CHANNEL-4.............................................................26 Chapter 4 Connect to a PC .................................................................27 4.1 Fir
Краткое содержание страницы № 6
Chapter 1 Introduction EB1004 BAK is a stand-alone, non-PC based DVR unit that provides real-time monitoring and digital recording of surveillance video. Up to four video cameras and four sensor devices can be hooked up to this DVR unit. It is also equipped with an output relay that allows connection of an alarm device. Surveillance, digital recording and playback are controlled through the front panel buttons. Users can connect EB-1004 BAK to a PC to trace back video files, and even save
Краткое содержание страницы № 7
• Full-screen resolution: Display: 720 x 480 (NTSC), 720 x 576 (PAL) Recording: 640 x 224 (NTSC), 640 x 272 (PAL) • Display and recording frame rate: Quad mode: 30/25 fps (NTSC/PAL) per channel, total of 120/100 fps (NTSC/PAL) • Scheduled recording (00:00~23:00 set by hour ) • Search for recorded videos by date/time/event • Input/Output: 4 sensor inputs and 1 relay output control • Motion detection recording. • Removable HDD bay • 1 USB 2.0 Port • Application CD (for Windows 2000/X
Краткое содержание страницы № 8
1.2 Front Panel 3 5 2 12 4 6 7 11 15 1 20 19 16 17 8 9 12 18 10 13 14 1. REC : Start video recording. 2. MENU : Open/Close the OSD main menu or subsequent submenus. 3. : Go up one item. 4. : Go down one item. 5. SELECT : (a) Cycle through various options in a selected menu item. (b) Open a submenu 6. : (a) Display Channel 1 in full-screen. (b) Pressing this button is equivalent to entering the number "1" when in the OSD menu. 7. : (a) Display Channel 2 in ful
Краткое содержание страницы № 9
14. : (a) Fast forward during playback. (b) Switch between the play list and the date/time search controls. 15. Removable hard disk rack with lock CAUTION BEFORE REMOVING THE REMOVABLE OR INTERNAL HARD DISK, POWER OFF THE DVR UNIT FIRST. 16. Removable Hard disk LED 17. Removable Power LED 18. Internal Hard Disk LED 19. DVR Power LED 20. USB2.0 Socket 1.3 Back Panel 1 2 3 4 7 6 5 1. VGA OUT (15-pin D-Sub): VGA output for connection to a VGA monitor. 2. VIDEO OUT (BNC):
Краткое содержание страницы № 10
1.4 Setting Up the DVR Unit 1.4.1 Installing Hard Drives Before you install hard drives, please adjust the jumpers’ setting according to the instructions on your hard disk label. The DVR unit allows you to install up to two hard drives (a master and slave drive). Install one hard disk in a removable hard disk drawer as HDD A and the other hard disk inside DVR unit as HDD B. Fix the hard disks as the right picture shows. The minimum hard disks capacity should be 40GB/ 7200
Краткое содержание страницы № 11
1.4.2 Install the Hard Drive in a Removable Case 1. After unlock the removable hard disk drawer, remove the removable hard drive drawer from the case. 2. Remove the upper cover of the drawer. 3. Connect the power connector to the hard drive as the right picture shows. 4. Connect the hard disk connector into the inner tray’s slot. 5. Close the upper cover. Slide the drawer into the removable hard drive case, and lock the drawer. 6. Power on th
Краткое содержание страницы № 12
1.4.3 Install a Removable Hard Drive Case in a PC (Optional) For users who purchase an optional hard drive case, please follow the steps to install the case in a PC. 1. Power off your PC and remove the cover of your PC. 2. Remove a front cover and free a 5 1/4” drive bay. Insert the hard disk holder. Mount the hard disk holder, screw up the holder, and connect the IDE slot and power connector from PC’s motherboard. 3. Remove the drawer of the removable hard disk case. Please refer to 1.
Краткое содержание страницы № 13
1.4.4.1 Basic Devices • Cameras Connect the video output of each video camera or composite video source to the CH1 ~ CH4 connectors. • VGA monitor Connect a VGA monitor to the VGA OUT connector of the DVR unit to use as a display for video surveillance and playback. • Power adapter Plug the provided 110V AC or 220V power adapter into the DVR unit's power socket. 1.4.4.2 Optional Devices • Television monitor Use a BNC-to-RCA adapter to connect a regular TV monitor to the DVR unit's
Краткое содержание страницы № 14
Terminal 9 : Connect to the positive (+) wire of the alarm device Terminal 10 : Connect to the ground (-) wire of the alarm device • Desktop/Laptop computer Connect EB1004 BAK to a PC with a USB cable. Insert the USB connector to PC’s USB socket. 11
Краткое содержание страницы № 15
Chapter 2 Operating the DVR Unit 2.1 First Time Use Connecting the DVR unit to a power outlet automatically turns on its power. When you install new hard disks in your DVR, the system will detect hard disks status and show “HDD FORMAT SELECT(YES) /MENU(NO)”. Press to format hard disks. V1-0-07 HDD Checking … MASTER 123593 MB SLAVE 123593 MB HDD FORMAT (SELECT) YES/(MENU) NO The system will show “ARE YOU SU
Краткое содержание страницы № 16
Sometimes the system has trouble detecting the hard disks, it shows “Turn off and on the DVR” on the screen. Turn off and on the DVR Follow the instruction to unplug DVR. Reboot and the system will show the normal first time use screen. After you format the hard drive(s), please enter the default password before you enter the main menu. The factory default password is "111111". Use the following front panel buttons to input a numeri
Краткое содержание страницы № 17
EACH mode QUAD mode Use the following front panel buttons to select the desired video camera to display in full screen: CH1: Camera 1 CH2: Camera 2 CH3: Camera 3 CH4: Camera 4 Note: The recording mode can be selected in the OSD main menu. 2.3 Video Recording and Playback When you are back to the preview mode, the system will start to record the video automatically when it detects a 10-second idleness. When “PASSWORD SETUP” is enabled, you need to enter the password after c
Краткое содержание страницы № 18
2.3.2 To play back the recorded video 1 Press to display the Playlist: 2 If you want to switch to the other hard drive or search for a range of video recordings, press . The ">" arrowhead cursor will then move up to the top of the screen. 3 Press button to switch between the MASTER and SLAVE drives. 4 Press to move down to the recording date and time entries. 5 Press or to move through each item in the recording date and time entries. While on an item such as the month, press
Краткое содержание страницы № 19
Chapter 3 Setup Menu MAIN MENU > CAMERA SELECT 1234 RECORD SCHEDULE RECORD SELECT 1234 RECORD MODE EACH v RECORD FRAMERATE 30 +TTTSSSSSTTTTMMMMTTTTT+ VIDEO QUALITY NORMAL | | | | | | | | | RECORD SCHEDULE 0 3 6 9 12 15 18 21 24 SUBMENU HARD DRIVE SETUP SENSOR SETUP PRESS (< , >), THEN(SELECT) PRESS (MENU) TO EXIT PRESS (< , >), THEN(SELECT) PRESS (MENU) TO EXIT SUB MENU > PASSWORD CHANGE TIME
Краткое содержание страницы № 20
1 Press button to display the OSD main menu. MAIN MENU > CAMERA SELECT 1234 RECORD SELECT 1234 RECORD MODE EACH RECORD FRAMERATE 30 VIDEO QUALITY NORMAL RECORD SCHEDULE SUBMENU HARD DRIVE SETUP SENSOR SETUP PRESS (< , >), THEN(SELECT) PRESS (MENU) TO EXIT 2 Press or to move up or down through the items in the menu. The ">" arrowhead cursor moves as you press these buttons. 3 The first five items in the menu prov
