Краткое содержание страницы № 1
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP
ACT-IR100M+/100M/100MP
IrDA Printer Adapter
User’s Manual
□
IR-100M
ACTiSYS Corp.
48511 Warm Springs Blvd, Suite 206
Fremont, CA 94539, USA
TEL: (510) 490-8024, FAX: (510) 623-7268
E-Mail: irda-support@actisys.com
Web: www.actisys.com
Release 3.2, December 9, 2003 1
© Copyright ACTiSYS Corporation 1999-2003. All Rights Reserved
Краткое содержание страницы № 2
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP FCC & VCCI Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. WARNING-FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manuf
Краткое содержание страницы № 3
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP IMPORTANT – COMPATIBILITY We appreciate all of our honorable users of this product will read this compatibility list carefully. Known Compatible Printer Model List HP LaserJet: 6P, 6MP, 5P, 5MP, 4L, 5L, 2300 HP OfficeJet: K80 HP DeskJet: 5xx series, 648C, 842C, 932C, 935C, 950C, 952C, 960Cse, 970Cse, 3820 CANON 4300, 4400, S400, S600 EPSON Stylus Color Series: 440, 600, 670, 760, 777,
Краткое содержание страницы № 4
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP TABLE OF CONTENTS INTRODUCTION .......................................................................................................................................................5 PARTS CHECK LIST ................................................................................................................................................9 SYSTEM REQUIREMENTS.........................................................................
Краткое содержание страницы № 5
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP INTRODUCTION The ACT-IR100M+ is the only Two-in-One IrDA parallel printer adapter that allows a mobile device to print directly via infrared. A mobile device user can print out via infrared port and he can also print out via parallel port from desktop PC. ACT-IR100M+ consists of a detachable serial IrDA adapter ACT-IR220L+ and a parallel adapter ACT-IR100MB. You can use the serial IrDA adapter ACT-IR220L+ al
Краткое содержание страницы № 6
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP ACT-IR100MB DB36 DB36 LED Indicator DB9 DB9 IR Port ACT-IR220L+ LED Indicator AC Adapter Figure 1 : ACT-IR100M+ ACT-IR100M+ LED Status Definition Name Status Meanings Off Before Detecting IR Device LED Blink Slowly IR Signal Detected On IR Communicating Release 3.2, December 9, 2003 6 © Copyright ACTiSYS Corporation 1999-2
Краткое содержание страницы № 7
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP ACT-IR100M DB36 DB36 LED Indicator IR Port IR Head AC Adapter Figure 2 : ACT-IR100M ACT-IR100M LEDs Definition Name Status Meanings Power LED (red) On Power on Parallel LED (green) On or Blink fast Printing through the infrared port Infrared LED (green) Blink Stand-by for transmission Release 3.2, December 9, 2003 7 © Co
Краткое содержание страницы № 8
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP ACT-IR100MP DB3 IR Head LED Indicator Figure 3: ACT-IR100MP Figure 3 : ACT-IR100MP ACT-IR100MP LED Status Definition Name Status Meanings Off Before Detecting IR Device LED Blink Slowly IR Signal Detected On IR Communicating Release 3.2, December 9, 2003 8 © Copyright ACTiSYS Corporation 1999-2003. All Rights Reserved
Краткое содержание страницы № 9
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP PARTS CHECK LIST When you unpack the package, the following items should be found. IR100M IR100MB IR100M+ IR100MP ◎ ◎ ◎ ◎ Print Adaptor Floppy Disk ◎ ◎ ◎ ◎ User’s manual & Win95Driver IR220L+ Dongle Built-in IrDA Port ◎ Built-in IrDA Port AC Adaptor ◎ ◎ ◎ ◎ ◎ ◎ ◎ User Guide (Booklet) SYSTEM REQUIREMENTS To use ACT-IR100M+/IR100M/IR100MP, you MUST meet the following requirements. Your PC which use passing
Краткое содержание страницы № 10
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP SETUP IR100M/IR100M+ DB25F Printer Port CEN36F Port IR Head Figure 4: Connection Diagram with Passing Thru IR100MP IR Head CEN36F Port Figure 5: Connection Diagram without Passing Thru Release 3.2, December 9, 2003 10 © Copyright ACTiSYS Corporation 1999-2003. All Rights Reserved
Краткое содержание страницы № 11
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP IR100M/IR100M+ IR Head 30 ° Maximum IR Port 100cm 30 ° Figure 6. Align Diagram Setting Up Your Printer/IR100M+/IR100M/IR100MP/PC (If you use the pass through function) 1. Turn Off both your computer and printer. 2. Connect ACT-IR220L+ to ACT-IR100M+ only if you have IR100M+. 3. Connect your printer and ACT-IR100M+/IR100M/IR100MP. 4. Connect your ACT-IR100M+/IR100M/IR100MP and PC by printer cable ( If you use the pass thr
Краткое содержание страницы № 12
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP 14. Align your mobile device infrared eye with IR100M+/IR100M/IR100MP IR Head (see figure 3). The LED on IR100M+/IR100MP will flash slowly. Or the Infrared LED on the top of IR100M will flash. 15. Choose Print, the LED on IR100M+/IR100MP will be on and printer begin to print out. Or the parallel LED on the top of IR100M will flash and printer beginning to print out. If not, see Trouble Shooting. Release 3.2, December 9, 2003 12 ©
Краткое содержание страницы № 13
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP TROUBLE SHOOTING AND COMPATIBLE PRINTERS LIST For help on general and miscellaneous problems you may be experiencing with your printing, refer to the following pages for possible solutions. Look up your problem and try the solution. Note: Please Check your printer is on the IR-100M+/IR100M/IR100MP compatibility list first. If not, contact Actisys technical support. ACT-IR100MP Trouble Shooting Table Problem Solution When I tr
Краткое содержание страницы № 14
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP ACT-IR100M Trouble Shooting Table IF your IR100M version is v2.2 or below, you MUST follow the power sequence. Problem Solution The power LED is not on. 1 Be sure there is 110V AC power supply to your wall outlet. 2 Be sure AC adapter is firmly plugged in the wall outlet. 3 Be sure AC adapter’s output is 7.5V ~ 12V inside positive. 4 Be sure AC adapter is firmly attached to IR100M. When I try to print from 1 Be sure the cable between
Краткое содержание страницы № 15
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP SPECIFICATIONS Model: ACT-IR100M+/100M/100MP Carrier: Infrared radiation (peak wavelength: 850 to 1050 nm) IrDA SIR Transmission Speed: 9.6, 19.2, 38.4, 57.6, 115.2K bps Parity Bit: None Data: 8 bit Stop Bit: 1 bit Error Check: CRC Parallel Interface: Centronics 36F/36M Cable to Parallel Printer. DB 25M/Centronics 36M Cable to PC Parallel Port. Power Consumption: 0.30W During Printing o o o o Operating Temperat
Краткое содержание страницы № 16
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP WARRANTY INFOMATION THE FOLLOWING WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. ACTiSYS Corporation warrants to the first consumer purchaser, for a period of 1 year from the date of purchase, that this wireless interface (The Product? Will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defec
Краткое содержание страницы № 17
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP CONTACT INFORMATION ACTiSYS Corporation. 48511 Warm Springs Blvd, Suite 206 Fremont, CA 94539, USA TEL: (510) 490-8024, FAX: (510) 623-7268 E-Mail: irda-support@actisys.com Web: www.actisys.com Release 3.2, December 9, 2003 17 © Copyright ACTiSYS Corporation 1999-2003. All Rights Reserved
