Краткое содержание страницы № 1
DO NOT
DISCARD
Owner’s Manual
Installation and Operation
Model:
Twilight-II-B
NOTICE
DO NOT DISCARD THIS MANUAL
• Important operating • Read, understand and follow • Leave this manual with
and maintenance these instructions for safe
party responsible for use
instructions included. installation and operation.
and operation.
WARNING
WARNING: If the information in these
HOT SURFACES!
instructions is not followed exactly, a fi re
Glass and other surfaces are hot during
or explosion may result
Краткое содержание страницы № 2
Read this manual before installing or operating this appliance. Please retain this owner’s manual for future reference. This owner’s manual should be retained for future A. Congratulations reference. We suggest that you keep it with your other Congratulations on selecting a Heat & Glo LifeStyle gas important documents and product manuals. fi replace, an elegant and clean alternative to wood burning The information contained in this owner’s manual, unless fi replaces. The Heat & Glo LifeStyl
Краткое содержание страницы № 3
Safety Alert Key: • DANGER! Indicates a hazardous situation which, if not avoided will result in death or serious injury. • WARNING! Indicates a hazardous situation which, if not avoided could result in death or serious injury. • CAUTION! Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. • NOTICE: Used to address practices not related to personal injury. Table of Contents A. Congratulations . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Краткое содержание страницы № 4
B. Limited Lifetime Warranty Hearth & Home Technologies LIMITED WARRANTY Hearth & Home Technologies (“HHT”) and its respective brands extends the following warranty for HHT gas, wood, pellet and electric appliances purchased from an authorized HHT dealer and installed in the United States of America or Canada. Warranty starts with date of purchase by the original owner (End User) except as noted for replacement parts. Warranty Period HHT Manufactured Appliances and Venting Components Covered
Краткое содержание страницы № 5
B. Limited Lifetime Warranty (continued) • This limited warranty does not extend to or include surface fi nish on the appliance or terminations, door gasketing, glass gasketing, glass discoloration, fi rebrick, pellet logs, kaowool or other ceramic insulating materials. Rust and/or corrosion on any of the metal surfaces, cast iron components, baffl es, fi repots, doors, or fi rebox area are not covered by this warranty. • Noise resulting from minor expansion, contraction, or movement of certain p
Краткое содержание страницы № 6
Listing and Code Approvals 1 1 A. Appliance Certifi cation D. Air Infi ltration, Water Resistance and Structural Tests MODEL: Twilight-II-B The Hearth & Home Technologies Twilight-II-B Indoor/ LABORATORY: Underwriters Laboratories, Inc. (UL) Outdoor Appliance unit was tested to the following ASTM TYPE: Direct Vent Gas Appliance standards at the Stork Twin City Testing laboratory. STANDARD: ANSI Z21.50-2003 • CSA2.22-M03 • UL307B Air infi ltration test ASTM:E283-(04). The sample was test- ed
Краткое содержание страницы № 7
D. High Altitude Installations NOTICE: If the heating value of the gas has been reduced, these rules do not apply. Check with your local gas utility or authorities having jurisdiction. When installing above 2000 feet elevation: • In the USA: Reduce input rate 4% for each 1000 feet above 2000 feet. • In CANADA: Reduce input rate 10% for elevations between 2000 feet and 4500 feet. Above 4500 feet, consult local gas utility. Check with your local gas utility to determine proper orifi ce siz
Краткое содержание страницы № 8
Inspection Note: The following requirements reference various The state or local gas inspector of the side wall horizon- Massachusetts and national codes not contained in this tally vented gas fueled equipment shall not approve the document. installation unless, upon inspection, the inspector ob- serves carbon monoxide detectors and signage installed H. Requirements for the Commonwealth of in accordance with the provisions of 248 CMR 5.08(2)(a)1 Massachusetts through 4. For all side wall
Краткое содержание страницы № 9
User Guide Operating Instructions 2 2 • Keep remote controls out of reach of children. A. Gas Fireplace Safety • Never leave children alone near a hot fi replace, whether operating or cooling down. WARNING • Teach children to NEVER touch the fi replace. HOT SURFACES! Glass and other surfaces are hot during • Consider not using the fi replace when children will be operation AND cool down. present. Hot glass will cause burns. Contact your dealer for more information, or visit: www. • DO NOT to
Краткое содержание страницы № 10
CLEAR SPACE 3 FT. IN FRONT OF FIREPLACE C. Fan Kit (optional) F. Fixed Glass Assembly If desired, a fan kit may be added. Contact your dealer to See Section 11.G. order the correct fan kit. G. Remote Controls, Wall Controls and Wall D. Clear Space Switches WARNING! DO NOT place combustible objects in front Follow the instructions supplied with the control installed of the fi replace or block louvers. High temperatures may to operate your fi replace: start a fi re. See Figure 2.2. For safety:
Краткое содержание страницы № 11
I. Lighting Instructions (IPI) The IPI system may be operated with two D-cell batteries. When using batteries, unplug the transformer. To prolong battery life, remove them when using the transformer. FOR YOUR SAFETY LIGHTING READ BEFORE LIGHTING INSTRUCTIONS (IPI) WARNING: If you do not follow these instructions exactly, a fi re or explosion may result causing property damage, personal injury or loss of life. 1. Turn off all electric power to the appliance. • Immediately call your gas supplie
Краткое содержание страницы № 12
J. After Fireplace is Lit Initial Break-in Procedure • The fi replace should be run three to four hours continu- ously on high. • Turn the fi replace off and allow it to completely cool. • Remove fi xed glass assembly. See Section 11.G. • Clean fi xed glass assembly. See Section 3. • Replace the fi xed glass assembly and run continuously on high an additional 12 hours. This cures the materials used to manufacture the fi re- place. NOTICE! Open windows for air circulation during fi re- place break-in.
Краткое содержание страницы № 13
Maintenance and Service 3 3 Doors, Surrounds, Fronts Any safety screen or guard removed for servicing must be replaced prior to operating the fi replace. Frequency: Annually By: Homeowner When properly maintained, your fi replace will give you many years of trouble-free service. We recommend an- Tools needed: Protective gloves, stable work surface nual service by a qualifi ed service technician. • Assess condition of screen and replace as necessary. A. Maintenance Tasks-Homeowner • Insp
Краткое содержание страницы № 14
By: Qualifi ed Service Technician Exhaust Termination Tools needed: Protective gloves, vacuum cleaner, dust Frequency: Seasonally cloths By: Homeowner • Vacuum and wipe out dust, cobwebs, debris or pet hair. Tools needed: Protective gloves and safety glasses. Use caution when cleaning these areas. Screw tips that • Inspect exhaust termination for blockage or obstruction have penetrated the sheet metal are sharp and should such plants, bird nests, leaves, snow, debris, etc. be avoided. •
Краткое содержание страницы № 15
(Either cobrahead or SIT) Figure 3.2 Generic IPI Pilot Flame Pattern Heat & Glo LifeStyle Collection • Twilight-II-B • 2108-900 Rev. M • 11/08 15
Краткое содержание страницы № 16
Installer Guide Getting Started 4 4 A. Design and Installation Considerations B. Tools and Supplies Needed Heat & Glo LifeStyle direct vent gas appliances are de- Before beginning the installation be sure that the following signed to operate with all combustion air siphoned from tools and building supplies are available. outside of the building and all exhaust gases expelled to Tape measure Framing material the outside. No additional outside air source is required. Pliers High temperature
Краткое содержание страницы № 17
Framing and Clearances 5 5 NOTICE: Illustrations refl ect typical installations and are A. Selecting Appliance Location FOR DESIGN PURPOSES ONLY. Illustrations/diagrams When selecting a location for the appliance it is important to are not drawn to scale. Actual installation may vary due to consider the required clearances to walls (see Figure 5.1). individual design preference. WARNING! Risk of Fire or Burns! Provide adequate clearance around air openings and for service access. Due to
Краткое содержание страницы № 18
B. Clearances OVERHANG NOTICE: Install appliance on hard metal or wood surfaces extending full width and depth. DO NOT install directly FINISHING MATERIALS on carpeting, vinyl, tile or any combustible material other than wood. B A A SIDING WARNING! Risk of Fire! Do not install appliance against vapor barriers or exposed insulation. Prevent contact with A sagging or loose insulation. • Locate and install appliance to all clearance specifi cations in manual. SIDING SIDING • The chase must be p
Краткое содержание страницы № 19
C. Mantel and Wall Projections WARNING! Risk of Fire! Comply with all minimum clear- TOP VIEW ances as specifi ed. Framing or fi nishing material closer than the minimums listed must be constructed entirely of noncom- bustible materials (i.e., steel studs, concrete board, etc). MEASURED FROM CORNER Combustible and Non-combustible Mantels- Indoor only 1/2 IN. CEILING FIREPLACE NON-COMBUSTIBLE BOARD (SUPPLIED ON APPLIANCE) HOOD INDOOR SIDE ONLY 12 11 10 35-3/4 9 8 13-5/8 7 Figure 5.5 Clearances t
Краткое содержание страницы № 20
Termination Locations 6 6 A. Appliance Opening Minimum Clearances = AREA WHERE APPLIANCE IS NOT PERMITTED G = AIR SUPPLY INLET X FP A H D = APPLIANCE OPENING FP E M B P L B N FP B R FP FP F M FP FP I Q X FP (See Note 2) A J or K A = 0 in ........................clearances above grade, veran- J = 9 in. (U.S.A.) (See Note 1) da, porch, deck or balcony 12 in. (Canada) .......clearance to non-mechani- cal air supply inlet to building B* = 12 in. .....................clearances to window or
