Chamberlain MUOTIU-EX دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Model MUOTIU-EX
Outdoor Multi-Unit Telephone Interface
Step 2
Overview
The Outdoor Multi-Unit Telephone Interface uses a
900 Mhz secure digital radio link that allows secure
conversations and gate operator control.
The Outdoor Multi-Unit Telephone Interface
(MUOTIU-EX) is compatible with various Liftmaster
Wireless Products.
Carton Inventory
Mount to solid surface.
Test/Program Cord
Wiring to AC Adapter
Outdoor Multi-Unit Telephone
Interface (MUOTIU-EX)
Remove bottom panel
of the MUOTIU-EX

ملخص المحتوى في الصفحة رقم 2

Program Accessories Features & Operation With Existing Network NOTE: Any features of the MUOTIU-EX do not NOTE: If programming into an existing network, require extra service from the Telephone Company. ensure the MUOTIU-EX is programmed to the Active unit. The MUOTIU-EX acts as a wireless remote Answering Calls autodialer in a dedicated line system. A conversation When visitor presses the number (00-63) then the cannot be held on the phone connected to the Call button, the MUOTIU-EX will

ملخص المحتوى في الصفحة رقم 3

MUOTIU-EX is not getting expected transmission PIN Number Functions range. Number Function When used in buildings with stucco or cement walls, *#(00-63)#(Phone Number)# Program number the range is greatly reduced. The Repeaters can be used close to the building to solve this problem. **01***** Erase ALL numbers Keep MUOTIU-EX away from trees, metal objects, **03#(00-63)# Erase ONE number masonry, computers, and any other “Radio Noise **07 Activate the Source”. Radio devices that run on 90

ملخص المحتوى في الصفحة رقم 4

FOR TECHNICAL SUPPORT DIAL OUR TOLL FREE NUMBER: 1-800-528-2806 www.liftmaster.com NOTICE: To comply with FCC and or Industry Canada rules (IC), adjustment or modifications of this receiver and/or transmitter are prohibited, except for changing the code setting or replacing the battery. THERE ARE NO OTHER USER SERVICEABLE PARTS. Tested to Comply with FCC Standards FOR HOME OR OFFICE USE. Operation is subject to the following two conditions: (1) this device may not cause harmful interference,