Memorex MPH7825 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

MPH7825
Congratulations on your selection of the MPH7825 from
¨
Memorex . This quality 2.4GHz cordless telephone, like all
¨
Memorex products, has been designed to give you many
years of continuous service and represents the best value
for your money. It requires little maintenance and is easy to
setup and operate.

ملخص المحتوى في الصفحة رقم 2

IMPORTANT SERVICE INFORMATION Read this manual before attempting to setup or use this instrument. It contains important information regarding safe installation and use. Keep this manual for future reference. Also save the carton, packing and proof of purchase to simplify and accelerate any needed action. If you need assistance or service, call 1-800-919-3647. You can also visit our web site at: http://www.memcorpinc.com for technical support and information on our other products. WARNING To

ملخص المحتوى في الصفحة رقم 3

SAVE THESE INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 4. Do not use this pro

ملخص المحتوى في الصفحة رقم 4

SAVE THESE INSTRUCTIONS BATTERY SAFETY INSTRUCTIONS CAUTION: To reduce the risk of fire or injury to persons, read and follow these instructions: 1. Use only the following type and size of handset battery pack: Cordless Telephone Battery Pack DC3.6V, 600mAh, Ni-Cd Battery Pack 2. Do not dispose of the battery in a fire. The cell may explode. Check with local codes for possible special disposal instructions. 3. Do not open or mutilate the battery. Released electrolyte is corrosive and may cause d

ملخص المحتوى في الصفحة رقم 5

FCC NOTICE The FCC requires that you be advised of certain requirements involving the use of this telephone. 1. This telephone is Hearing Aid Compatible. 2. This equipment complies with Part 68 of the FCC rules. On the bottom of this equip- ment is a label that contains, among other information, the FCC registration number and Ringer Equivalence Number (REN) for this equipment. If requested, provide this information to your telephone company. 3. The REN is useful to determine the quantity of dev

ملخص المحتوى في الصفحة رقم 6

DESCRIPTION CONTROLS' LOCATION AND FUNCTION 16 1 15 14 2 3 13 4 5 6 12 7 11 10 8 9 (Figure 1) HANDSET CONTROLS 1. RING OFF LED Indicator: Lights when ringer off mode is set. 2. TALK Button: Press to answer an incoming call or to place a call. Press to end a call. 3. RING Button: Turns the handset ringer on or off when pressed and held for 2 seconds. 4. TONE (*) Button: Used to temporarily change the dialing mode from pulse to tone for rotary service users. Provides tone function to access specia

ملخص المحتوى في الصفحة رقم 7

Rear View 8 7 1 2 Bottom View 6 3 5 4 (Figure 2) BASE UNIT CONTROLS 1. 9VDC Adapter Jack: A jack located on the rear side of the base unit used for connect- ing the adapter to the base unit. 2. TEL LINE JACK: Accepts line cord to make connection with modular type telephone outlet. 3. T / P (Tone / Pulse) Switch: Allows you to switch the dialing mode to either Tone or Pulse dialing. 4. Charge Terminals: Used for charging handset battery. We recommend that you clean these contacts periodically wit

ملخص المحتوى في الصفحة رقم 8

Telephone Modular Wall Jack Base Unit (Side View) Studs Wall Mount Slots Wall Mounting Bracket (Figure 4) NOTE: If you do not have a standard modular wall jack, find a qualified technician to mount one on the wall. B. WALL MOUNTING (No Standard Wall Jack) 1. Drill two holes with a vertical distance between the two marked positions of 3 15/16" (100 mm) as shown in Figure 5. 2. Drive a screw into each of the holes. Tighten them to the 3 15/16Ó end of the screw line, only leaving the smooth part o

ملخص المحتوى في الصفحة رقم 9

CONNECTING THE HEADSET For hands free conversation, a headset (not included) is connected to the headset jack as shown in Figure 8. The handset receiver and microphone are disabled when the headset is connected. Headset Jack Headset Plug (2.5mm) (Figure 8) Press the TALK button to answer or place a call when using the headset. Refer to the manufacturer's headset manual for more details. BASE UNIT POWER CONNECTION CAUTION: You must use a Class 2 Power Source 9VDC 300mA. The plug must correctly fi

ملخص المحتوى في الصفحة رقم 10

HANDSET BATTERY INSTALLATION CAUTION: Use only the Nickel Cadmium (Ni-Cd) battery type included with this unit. Use of other battery types may cause injuries or damage. 1. Remove the battery compartment cover of the handset. 2. Connect the rechargeable Ni-Cd battery as shown on Figure 10. Insert the End of the Handset Battery Pack Wire Battery Compartment RED Wire BLACK Wire (Figure 10) 3. Insert the Ni-Cd battery into the battery compartment of the handset. 4. Slide the battery compartment cove

ملخص المحتوى في الصفحة رقم 11

TO RECEIVE A CALL NOTE: If you are expecting incoming calls, the ringer mode must be set to RING ON mode. RING OFF LED indicator is off. A. IF THE HANDSET IS ON THE BASE UNIT 1. Since the unit features " Auto-Answer ", simply pick up the handset from the base cradle when the phone rings. The base and handset IN USE LED indicator will turn on. 2. Start your conversation. 3. To end your conversation, either press the TALK button or place the handset on the base unit. The base IN USE LED indicator

ملخص المحتوى في الصفحة رقم 12

2. Press the TONE (*) button once to switch from Pulse to Tone dialing temporarily. Pulse dialing mode resumes when the call is ended. PAUSE FUNCTION ¥ ¥ ¥ In some cases, such as PABX or long distance service, a pause may be needed in the ¥ ¥ dialing sequence. Pressing the handset RE / PA button inserts a four-second delay between dialed numbers. ¥ ¥ ¥ ¥ ¥ Each four-second pause occupies one digit of the available 16 digits per memory location. FLASH FUNCTION ¥ ¥ ¥ Used to access custom calling

ملخص المحتوى في الصفحة رقم 13

IMPROVING CORDLESS RECEPTION Follow these guidelines to improve cordless sound quality: ¥ ¥ ¥ ¥ ¥ Select an area to install the unit where it is closest to the center of your home or office. This will improve the operating range of the unit. ¥ ¥ ¥ ¥ ¥ Keep the base unit away from electrical equipment. Radio Frequency Interference (RFI) is sometimes generated by these appliances, which can cause degradation in cordless reception. ¥ ¥ ¥ ¥ ¥ Keep the handset batteries charged as much as possible. W

ملخص المحتوى في الصفحة رقم 14

TROUBLESHOOTING SYMPTOMS POSSIBLE SOLUTION / CAUSE No dial tone ¥ ¥ ¥ ¥ ¥ Check that the telephone line cord connectors at both ends are pushed in firmly until they click. ¥ ¥ ¥ ¥ ¥ Check if another telephone line (sharing with the same line as the unit) is off-hook or in use. ¥ ¥ ¥ ¥ ¥ If you had a power failure or had unplugged the base unit, replace the handset on the base unit for two to five seconds to reset the system. ¥ ¥ Does not ring ¥ ¥ ¥ Check the ringer mode on the handset. Change to

ملخص المحتوى في الصفحة رقم 15

TECHNICAL INFORMATION This cordless phone uses radio frequencies to allow mobility. There are certain difficulties in using radio frequencies with a cordless telephone. While these are normal, the following could affect the operation of your system. NOISE: Electric pulse noise is present in most homes at one time or another. This noise is most intense during electrical storms. Certain kinds of electric equipment such as light dimmers, fluorescent bulbs, motors, and fans also generate noise pulse

ملخص المحتوى في الصفحة رقم 16

¨ Distributed Exclusively by Memorex . MPH7825 / 04261A-1 www.memcorpinc.com 15

ملخص المحتوى في الصفحة رقم 17

MPH7825 ¨ Nous vous fŽlicitons d'avoir choisi MPH7825 de Memorex . Ce tŽlŽphone sans fil de qualitŽ de 2.4GHz, comme tous ¨ les produits authentiques de Memorex , a ŽtŽ conu pour vous donner maintes annŽes de service fidŽle et le meilleur rendement pour votre argent. Il requiert peu d'entretien, est trs facile ˆ mettre au point et ˆ utiliser.

ملخص المحتوى في الصفحة رقم 18

RENSEIGNEMENTS IMPORTANTS POUR L'ENTRETIEN ET LA RƒPARATION Avant d'essayer de rŽgler ou d'utiliser est instrument, veuillez lire ce manuel qui renferme des renseignements importants sur une installation et une utilisation sans danger. Conservez ce manuel pour vous y reporter ˆ l'aventir. Gardez la bo”te de carton, l'emballage et la preuve d'achat pour simplifier et accŽlŽrer toute mesure nŽcessaire. S'il faut de l'aide ou un service d'entretien ou de rŽparation au Canada, veuillez tŽlŽphoner ˆ

ملخص المحتوى في الصفحة رقم 19

CONTENU DE LÕEMBALLAGE BLOC-PILES AU COMBIƒ SOCLE NICKEL-CADMIUM ADAPTATEUR CORDON DE LIGNE SUPPORT DE SECTEUR FIXATION AU MUR TƒLƒPHONIQUE (9VCC, 300mA) (COURT ET LONG) MPH7825 ATTACHECEINTURE GUIDE DÕUTILISATION 2

ملخص المحتوى في الصفحة رقم 20

CONSERVEZ CES INSTRUCTIONS MESURES DE SƒCURITƒ IMPORTANTES Dans le seul but de rŽduire les risques d'incendie, d'Žlectrocution ou de blessures corporelles, vous devez respecter certaines mesures de sŽcuritŽ ŽlŽmentaires lorsque vous utilisez des appareils tŽlŽphoniques, dont les suivantes : 1. Lisez et comprenez bien toutes les instructions. 2. Vous devez respecter ˆ la lettre les avertissements et mises en garde contenus sur les étiquettes de l'appareil et dans ce guide d'utilisation. 3. DŽbran