ملخص المحتوى في الصفحة رقم 1
Colour Television
Instruction Manual
MODEL NO. : DWP-28W2D, DWP-28W2KD, DWP-28W2GBD
DWP-28W2FD, DWP-28W2SD
DWP-28W2, DWP-28W2K, DWP-28W2GB
DWP-28W2F, DWP-28W2S
Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
ملخص المحتوى في الصفحة رقم 2
ADDITIONAL INFORMATION FOR THE SET SOLD IN GREAT BRITAIN The appliance is supplied with a moulded three pin mains plug fitted with 5Amp fuse. Should the fuse require replacement, it must be replaced with a fuse rated at 5 amp and approved by ASTA or BSI to BS1362. The plug contains a removable fuse cover that must be refitted when the fuse is replaced.In the event of the fuse cover being lost or damaged, the plug must not be used until a replacement cover has been obtained.Replacement fuse
ملخص المحتوى في الصفحة رقم 3
CONTENT Important safeguards...............................................3 Before Powering up..................................................4 Identity of features on local and remote control.......5 Connecting external equipment...............................7 Daily use..................................................................9 Menu........................................................................11 Teletext...................................................................
ملخص المحتوى في الصفحة رقم 4
IMPORTANT SAFEGUARDS WATER AND MOISTURE Never install the set in the following places: In a wet basement, bathroom. Do not place any container with liquid on the set. HEAT Never place the set near heat sources. VENTILATION Do not cover the air vents in the cabinet and never place the set in a confined space such as bookcase or built-in furniture unless proper ventilation is provided. Leave a minimum 10 cm gap all around the unit. OBJECT ENTRY Do not insert foreign objects, such as needles an
ملخص المحتوى في الصفحة رقم 5
BEFORE POWERING UP INSERTING BATTERIES INTO THE REMOTE CONTROL UNIT Insert the batteries (two 1,5V, type AAA) MADE IN KOREA Batteries MAINS CONNECTION Plug the mains cable into the power socket with 240v / 50Hz AC. AERIAL CONNECTION When using an outdoor aerial, it is usually connected to the set by means of 75 ohm lead, terminated with a coaxial plug. SWITCHING ON AND OFF Switching on Switch the set on with the MAIN POWER button, ( ON/OFF ), and then PR UP or DOWN button on the front of the
ملخص المحتوى في الصفحة رقم 6
IDENTITY OF FEATURES ON LOCAL AND REMOTE CONTROL LOCAL CONTROL Front PR VOLUME PROGRAMME TV / AV DOWN/UP BUTTON DOWN/UP BUTTONS BUTTONS ON/OFF VIDEO L AUDIO R VIDEO AUDIO HEAD INPUT INPUT PHONE MAIN REMOTE STAND-BY POWER SENSOR INDICATOR BUTTON Back AERIAL TERMINAL AV1 AV2 SCART SOCKET1 SCART SOCKET2 5
ملخص المحتوى في الصفحة رقم 7
REMOTE CONTROL UNIT TV mode TELETEXT mode 1 1 POWER 1 POWER 1 2 3 2 NUMBER 0-9 2 NUMBER 0-9 4 6 5 2 3 NORMAL / OK 3 INDEX 4 TV / AV 4 MIX 7 8 9 5 PR UP (CURSOR UP) 5 PAGE UP NORMAL/OK 0 6 VOLUME UP (CURSOR RIGHT) 4 3 6 SUBPAGE 7 MENU 7 MENU PR 5 8 PR DOWN (CURSOR DOWN) 8 PAGE DOWN MENU 9 VOLUME DOWN (CURSOR LEFT) 9 HOLD 6 10 MUTE 10 MUTE 9 11 RECALL 11 REVEAL 7 12 SLEEP 12 SIZE 8 10 13 not used 13 CANCEL PR SLEEP RECALL ? 14 MOVE (Edit mode only)
ملخص المحتوى في الصفحة رقم 8
CONNECTING THE EXTERNAL EQUIPMENT TV and AV Use the TV / AV button ( ) on the remote control unit or on the front of the set to select one of the three options. Whenever the TV / AV button ( ) is pressed, the on-screen display will be changed as shown: AV1 AV2 S-VHS TV SCART JACK 2 (AV2) : This is used to connect a VCR, SCART JACK 1 (AV1) : a Camcoder or a S-VHS VCR . This is used to connect a VCR, You can also receive the S-VHS a PERI-TV decoder,a Camcorder
ملخص المحتوى في الصفحة رقم 9
HEADPHONE JACK Insert the headphone plug (3,5 mm) into the headphone socket. The sound from the speaker will be cut off. VIDEO GAME OR CAMCORDER FRONT AV JACK Connect the AV (Audio/Video) socket with an appropriate cable to the corresponding socket of the external equipment . Select AV mode by pressing the TV / AV button. Press the TV / AV button to return to the TV mode . NOTE : If two pieces of equipment are connected, one to the front AV JACK and a second to the SCART JACK 2
ملخص المحتوى في الصفحة رقم 10
DAILY USE 1 2 Direct selection Up/Down moves Use PR UP/DOWN buttons on the Use remote control NUMBER buttons. remote control unit or on the front of the set. For two digit programme numbers, press the button for the second digit PR within 2.5 seconds. MENU PR 3 Mono forcing If you are unable to get good sound on a channel due to a poor stereo broadcasting signal, you can change from stereo to mono transmission by pressing the remote control MODE button. Then the programme status concerning thi
ملخص المحتوى في الصفحة رقم 11
1 2 Volume adjustment Mute Use VOLUME UP/DOWN buttons Turn the sound off by pressing the remote control on the remote control unit MUTE ( ) button. or on the front of the set. Then the logo ( ) is displayed on the screen. PR Sound returns by pressing the same button once more. MENU PR Programme number Channel name 01 BBC 1 Sound transmission mode : NICAM STEREO Displayed in red color The remaining time before Clock only if forced to mono 11:11 TV turn-off is displayed
ملخص المحتوى في الصفحة رقم 12
MENUS All menus are removed within 25 seconds if you don’t press any button. 1 Direct selection - Press remote control MENU button to display main menu. PICTURE SOUND Then, you have the choice between several sub-menus . PR FEATURES INSTALL MENU PR 1 2 - Select the function you want - Adjust the function using : to change using Remote control CURSORS LEFT or RIGHT button. remote control CURSORS UP or DOWN buttons. PR PR MENU MENU PR PR NORMAL/OK - Press the OK button to enter
ملخص المحتوى في الصفحة رقم 13
2 PR If you want to cancel immediately the main menu, MENU press MENU button once more. NORMAL / OK PR - To select one of the sub-menus, PR use remote control CURSORS buttons UP, DOWN, LEFT, RIGHT. MENU - To enter the selected sub-menu, press remote control OK button . PR 3 4 - Confirm (if needed) by pressing - Then Return to main menu remote control OK button . pressing MENU button . NORMAL / OK PR PR MENU MENU PR PR - Select and adjust the level of each function : SOUND "V
ملخص المحتوى في الصفحة رقم 14
MENUS 1. Language selection FEATURES LANGUAGE 2. Child lock prevents the use of the TV set without remote control unit. CHILD LOCK CLOCK WAKE TIME 3. TV clock setting WAKE PR - Note that if you turn off the set with the MAIN POWER button, the clock setting is lost and must be reset if necessary. The clock is set automatically if programme NO. 1 is selected for at least 6 seconds, and programme NO. 1 has teletext data. 4. Wake up function The TV set turns on at the time and with the progra
ملخص المحتوى في الصفحة رقم 15
1. Select the menu language. GB 2. Child lock Select this value ON or OFF: OFF - When switched ON: the stand-by indicator will flash red and green, child 00 : 00 lock is operating. OFF - The set can only be switched ON with the remote control unit. 01 3. Set TV clock with remote control 0 9 NUMBER buttons, then clock starts. 4. Switch "wake up" function ON/OFF with remote control CURSOR LEFT or RIGHT button - Enter wake up time with remote control 0...9 NUMBER buttons NB. Thi
ملخص المحتوى في الصفحة رقم 16
MENUS Automatic Tuning and Sorting System - Press remote control "OK" button for - Select "ATSS" function. more than 3 seconds to start the automatic - Select required country. tuning. - Note for satellite receiver users : - When automatic tuning is finished, recordable Before starting ATSS, connect your programmes are displayed on screen. equipment to the TV set, or via the VCR, turn it ON and tune in SKY NEWS. This menu shows the programme position assignment, you can change the
ملخص المحتوى في الصفحة رقم 17
1 2 TV system Selection Choose starting point Select the "Program" function and then If necessary, you can change the TV system : the programme which you want to start - Select "system" function. manual tuning. Then, the channel number, - Choose between : the frequency, If you don’t know the frequency FRANCE (L/L’), GB (I), or channel number then refer to channel EURO (B/G), E / EURO (D/K) system. searching section. The name and the programme Then, the programme displayed on number of this pro
ملخص المحتوى في الصفحة رقم 18
TELETEXT 1- SWITCHING TELETEXT ON/OFF - Select the channel which is broadcasting the teletext programme you want to watch - Press the remote control TELETEXT ( ) button to select teletext mode. The overview station page or the last page viewed (If you watched teletext on this channel previously) appears. - If you need to return to TV mode, press again, the remote control TELETEXT ( ) button . 2-PAGE SELECTION - You can enter directly the desired page number with the remote control
ملخص المحتوى في الصفحة رقم 19
4-TELETEXT FORMAT, PICTURE, SOUND CONTROL Doubling character size Repeatedly pressing the SIZE ( ) button doubles the character size in the following order : Upper half of the page > Lower half of the page > Return to normal size. Volume and brightness control in teletext mode Pressing the MENU button in teletext mode, the volume and brightness control menu will be displayed at the bottom of the screen. You can adjust volume and brightness using the corresponding colour on the remote con
