ملخص المحتوى في الصفحة رقم 1
Kodak
C700 Zoom
Camera
ENGLISH/ESPAÑOL/FRANÇAIS
ملخص المحتوى في الصفحة رقم 2
Camera Identification (3) (4) (2) (1) (5) (6) (11) (7) (8) (9) (10)
ملخص المحتوى في الصفحة رقم 3
SELECT TEXT EXP LEFT MENU SELECT ENTER Camera Identification (12) (13) (14) (15) (22) (21) (20) (19) (18) (17) (16)
ملخص المحتوى في الصفحة رقم 4
LCD Panel (25) (23) (24) SELECT TEXT EXP OFF FILL LEFT (31) (30) (29) (26) (28) (27)
ملخص المحتوى في الصفحة رقم 5
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: Your model camera has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits provide reasonable protection against interference in residential u
ملخص المحتوى في الصفحة رقم 6
KODAK ADVANTIX C700 Zoom Camera Welcome to the innovative world of the Advanced Photo System! And thank you for buying this KODAK ADVANTIX Camera. NEED HELP WITH YOUR CAMERA? Go to our web site at http://www.kodak.com or call: Kodak (USA only) from 9:00 a.m. to 7:00 p.m. (Eastern time) Monday through Friday at 1 (800) 242-2424. Kodak (Canada only) from 8:00 a.m. to 5:00 p.m. (Eastern time) Monday through Friday at 1 (800) 465-6325, ext. 36100; for the Toronto area, call (416) 766-8233, ext. 3610
ملخص المحتوى في الصفحة رقم 7
the Film Status Indicator (FSI) on the film ADVANCED PHOTO SYSTEM cassette to prevent re-exposure. FEATURES AVAILABLE WITH Mid-roll change (MRC) THIS CAMERA • You can change and remove film in the middle of the roll and reload it later to Triple format selection continue picture-taking. When you reload • You can take three different size pictures: the film cassette into the camera, the Classic (C), Group/HDTV (H), and magnetic Information Exchange (ix) Panoramic (P) pictures from the same film t
ملخص المحتوى في الصفحة رقم 8
Look for this logo to be certain that the film you buy is made for this camera. Look for this logo to select a certified photofinisher for developing your film and to assure that you get all the features of the Advanced Photo System. Film status indicator (FSI) Unexposed A highlighted indicator advances from one symbol to another to identify the status of the film inside the cassette. Partially exposed Fully exposed Processed negatives 3 1 2 4 3
ملخص المحتوى في الصفحة رقم 9
CONTENTS CAMERA IDENTIFICATION ............................. 5 USING THE “SELFTIMER” ............................ 14 ATTACHING THE STRAP ................................ 6 DATE AND TIME IMPRINTING ...................... 14 Setting the date and time .......................... 14 LOADING THE BATTERY ................................ 6 Date and time formats ............................... 15 Low-battery indicator ................................... 7 Changing the date and time Battery tips .........
ملخص المحتوى في الصفحة رقم 10
CAMERA IDENTIFICATION (Unfold the front and back cover flaps of manual for camera diagrams.) 1 ZOOM-DIAL LEVER 17 FILM-DOOR LATCH 2 SHUTTER BUTTON 18 ENTER BUTTON 3 LENS COVER/FLASH 19 SELECT BUTTON 4 FORMAT-SELECTOR BUTTON 20 FILM-REWIND BUTTON 5 VIEWFINDER 21 MENU BUTTON 6 LIGHT SENSOR 22 TRIPOD SOCKET 7 LENS LCD panel 8 SELF-TIMER LAMP 23 INFINITY-FOCUS INDICATOR 9 AUTO-FOCUS SENSORS 24 BATTERY SYMBOL 10 STRAP POST 25 TEXT-MESSAGING PANEL 11 BATTERY DOOR 26 FRAME COUNTER 12 VIEWFINDER EYEPIEC
ملخص المحتوى في الصفحة رقم 11
LOADING THE BATTERY ATTACHING THE STRAP 1. Insert the shorter looped This camera uses one end of the strap 3-volt lithium KODAK behind the STRAP K123LA (or equivalent) POST (10). Battery that supplies power for all camera operations. 1. Open the BATTERY DOOR (11) by using your finger tip. • Before you remove 2. Thread the longer end the old battery, close of the strap through the lens cover/flash. the shorter loop. 2. Insert the battery 3. Pull the strap tight. into the chamber as shown. 3. Snap
ملخص المحتوى في الصفحة رقم 12
Low-battery indicator Power shut-off It’s time to replace the battery when— To save battery power, the camera will automatically go into a sleep mode if it is • the BATTERY SYMBOL (24) “blinks” and not operated for more than 60 seconds. the “BATTERY LOW” message You can press the shutter button, zoom appears on the LCD panel or control, film-rewind, mode buttons or • none of the indicators, except for steady rewind button to awaken the camera. battery symbol, appears on the LCD panel and the sh
ملخص المحتوى في الصفحة رقم 13
2. Insert the film cassette completely into LOADING THE FILM the FILM CHAMBER (16). Make sure the You can load film into the camera with the Film Status Indicator (FSI) on the film lens cover/flash opened or closed. cassette is at ● (#1 position) for a new cassette or at ◗ (#2 position) for a 1. Turn the camera upside down and partially exposed cassette. slide the FILM-DOOR LATCH (17) to automatically open the FILM DOOR (15). • Do not force the film cassette into the film chamber. • The film doo
ملخص المحتوى في الصفحة رقم 14
C H P C H P TAKING PICTURES You can take Classic (C), Group/HDTV (H)*, C H P and Panoramic (P) pictures on the same film cassette (see the table on the C P following page for Typical print sizes). H Your photo-processing cost may be based on the format sizes(s) that 3. Frame your subject within the you use to expose the film. VIEWFINDER EYEPIECE (12). For a sharp 1. Lift the LENS COVER/ picture, stand at least 2.5 ft (0.8 m) FLASH (3) up to from your subject. uncover the 4. Partially depress the
ملخص المحتوى في الصفحة رقم 15
Typical print sizes (formats) 2. Slide the ZOOM- CH P DIAL LEVER (1) to the left to the Classic Group (HDTV) Panoramic wide-mode 3.5 x 5" or 4 x 6" 3.5 x 6" or 4 x 7" 3.5 x 8.5" to 4 x 11.5" position to (88.9 x 127 mm or (88.9 x 152 mm or (88.9 x 216 mm to zoom away from 102 x 152 mm) 102 x 178 mm) 102 x 292.7 mm) the subject. Slide the lever to the right NOTE: Your photofinisher will generally provide to the tele-mode 4 x 6, 4 x 7 , and 4 x 11.5 in. (102 x 152, 102 x 178, and position to zoom c
ملخص المحتوى في الصفحة رقم 16
3. Keep the subject within the distance TAKING FLASH PICTURES range for the speed of film in your In dim light, such as indoors or outdoors camera. Don’t take pictures beyond the in heavy shade, or on dark overcast days, maximum distance or your pictures will you need flash. Your camera features an be dark. automatic flash that fires when you need it and provides automatic daylight fill flash Flash-lamp signals under certain bright-light conditions Lamp Indicator Situation where shadows may ex
ملخص المحتوى في الصفحة رقم 17
Flash-to-subject distance SELECTING FLASH MODES AND ISO INFINITY-FOCUS MODE Film Wide Tele Besides the “AUTO FLASH” mode, you Speed (30 mm) (60 mm) can select “FILL FLASH,” “INFINITY,” and 50 2.5 to 9 ft 2.5 to 8 ft “FLASH OFF.” (0.8 to 2.7 m) (0.8 to 2.4 m) Press the SELECT BUTTON (19) until the 100 2.5 to 13 ft 2.5 to 11 ft desired indicator and corresponding text (0.8 to 4 m) (0.8 to 3.4 m) message appear on the LCD PANEL (14). 200 2.5 to 18 ft 2.5 to 15 ft (0.8 to 5.5 m) (0.8 to 4.6 m)
ملخص المحتوى في الصفحة رقم 18
“FILL FLASH” “FLASH OFF” OFF FILL When bright light indoors or outdoors When you do not want to use the flash, comes from behind the subject especially indoors where flash is (backlighting), dark shadows (especially prohibited, such as in theaters and on faces) may occur. Use fill flash to museums, or when you want to take lighten these shadows. twilight scenes or distant subjects that are beyond the flash range, or capture the 1. Press the SELECT BUTTON (19) until the ambiance of existing light
ملخص المحتوى في الصفحة رقم 19
USING THE DATE AND TIME IMPRINTING “SELFTIMER” This camera has a quartz clock and automatic calendar through the You can include yourself in pictures year 2099. by using the self-timer feature. The electronic self-timer will delay the Traditional cameras print date and/or time release of the shutter button for information directly onto the film. Your approximately 10 seconds after you camera uses the film’s magnetic data press the shutter button. strip to record date and time information which y
ملخص المحتوى في الصفحة رقم 20
3. Press the ENTER BUTTON (18) to store Changing the date and time formats the selected month and to activate the (mm, dd, yy/ dd, mm, yy/ yy, mm, dd and 12/24 hour) next “blinking” date option (follow 1. Repeatedly press the MENU steps 2 and 3 to complete your BUTTON (21) until the LCD PANEL (14) selection). displays “SET DATE FORMAT.” • After you set the “date” or “time,” 2. Press the SELECT BUTTON (19) to make the LCD panel will display “DATE IS” the selection. Press the ZOOM-DIAL or “TIME I
