Panasonic WV-CW244S دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

ON
12 3
● WV-CW244S
PRECAUTIONS
!2
“S” stands for surface mounting. This model can be installed on the surface of the wall or ceiling
using the supplied bracket.
1. This product should be installed and con- 7. Clean the lens faceplate with care.
nected by qualified service personnel or Do not clean the lens with strong or abra-
system installers in conformity with NEC. sive detergents. Use lens tissue or a cotton
Color CCTV Camera 85 mm
(3-3/8")
tipped applicator and ethanol.
Cable access hole
2

ملخص المحتوى في الصفحة رقم 2

● Heater unit installation ■ Image Adjustment SPECIFICATIONS OPTIONAL HEATER UNIT See OPTIONAL HEATER UNIT for details. Supplied scre Supplied screw w Variable angles You can manually adjust the pan/tilt/azimuth plus or minus 75 ° Adhesiv Adhesive tape e tape angles, focus, and zoom while observing the (max.) Pick-up device: 768 (H) x 494 (V) pixels, Interline transfer CCD ■ Optional Heater Unit WV-CW3H Har Harness ness connected monitor. Scanning area: 4.8 (H) x 3.6 (V) mm (Equivalent to 1/3