Gianni Industries Shear Lock P-MU-GS705N-30 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

251
267
GS-705N Shear Lock Installation Instruction
Unbalanced air conditioning (stack pressure) can hinder door alignment and must be corrected to help insure positive locking. It
is important to note that the Shear Locks need a regulated 12V DC (or 24VDC) at the lock, and use the highest quality door closer
only. Positive centering door closers are required for all double acting door applicators to help attain consistent dead center
alignment. Also the door latching problems must be corrected

ملخص المحتوى في الصفحة رقم 2

key wrench Leading edge of door Flush Installation 1. Make sure the gap between the door top rail and frame header is 2mm. Make adjustments to the door as required. 2. Adjust single acting door and door closer to insure the door settles immediately and is fully closed . (Adjust double acting door and POSITIVE CENTERING DOOR CLOSER to insure the door settles immediately and is fully closed and rest in the dead center of the frame. 3. Locate the vertical centerline of the magnet and armature as po