SECO-LARM USA E-942SA-600 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

ELECTROMAGNETIC LOCK Installation Manual ELECTROMAGNETIC LOCK Installation Manual
Installation Manual
TROUBLESHOOTING
Problem: Possible cause: Solutions:
Door does not lock No power
� Check to make sure the wires are connected
properly.
E-941SA-80Q
� Check that the power supply is connected and
operating
80-LB. MINIATURE
� Make sure the lock switch is wired correctly
ELECTROMAGNETIC LOCKS
Door locks, but can be easily Poor contact between � Make sure the electromagnet and armature plate
forced

ملخص المحتوى في الصفحة رقم 2

E-941SA-80 Installation Manual E-941SA-80 Installation Manual MOUNTING THE E-941SA-80Q FIG.1 Standard Mounting the door while the electromagnet is A. Drill holes for the mounting plate and engaged. armature plate (see fig. 1 and 2) by doing the following: 3. Do not tighten the armature plate 1. Fold the mounting template along against the door. The plate must be able to pivot around the armature the dotted line L-shaped screw. Maounting 2. Close the door. Find a mounting bracket location on the