ملخص المحتوى في الصفحة رقم 1
user manual
Dishwasher
ESF2450
ملخص المحتوى في الصفحة رقم 2
2 electrolux Electrolux. Thinking of you. Share more of our thinking at www.electrolux.com Contents Safety information 2 Setting and starting a washing programme Product description 3 10 Control panel 4 Care and cleaning 11 Use of the appliance 5 Technical data 12 Setting the water softener 5 What to do if… 12 Use of dishwasher salt 6 Installation 14 Use of rinse aid 7 Water connection 14 Loading cutlery and dishes 7 Electrical connection 16 Use of detergent 8 Envi
ملخص المحتوى في الصفحة رقم 3
electrolux 3 Installation – if the mains cable or water hoses are damaged, • Make sure that the appliance is not dam- – if the control panel, worktop or plinth aged because of transport. Do not con- area are damaged, that you can get ac- nect a damaged appliance. If necessary, cess to the inner side of the appliance. contact the supplier. Contact your local Service Force Centre. • Remove all packaging before first use. • Do not drill into the sides of the appliance • A qualified and competent p
ملخص المحتوى في الصفحة رقم 4
4 electrolux The rating label is on the back of appli- ance. Control panel 6 5 1 2 3 4 AB C 7 1 On/off button 2 Programme selection buttons 3 Save energy button /(Saver) 4 Delay start button 5 Indicator lights 6 Digital display 7 Function buttons Indicator lights The indicator light comes on when the washing phase or the rinsing phase operates. The indicator light comes on when the drying phase operates. The indicator light comes on when the washing programme is completed. The indicator light c
ملخص المحتوى في الصفحة رقم 5
electrolux 5 Indicator lights The indicator light comes on when it is necessary to fill the rinse aid. Refer to the chapter 'Use of 1) rinse aid'. 1) The indicator light is off when a washing programme operates. Delay start button The save energy function has no effect on some programmes. Refer to the chapter Use the delay start button to delay the start 'Washing programmes' for the list of pro- of the washing programme with an interval grammes where save energy has or not an between 1 and 19 h
ملخص المحتوى في الصفحة رقم 6
6 electrolux • mmol/l (millimol per litre - international unit Adjust the water softener to the water hard- for the hardness of water). ness in your area. If necessary, contact your •Clarke. local water authority. Water hardness Water hard- Digital dis- ness setting play level °dH mmol/l °TH Clarke >24 >4.2 >40 > 28 5 18- 24 3.2- 4.2 32- 40 22- 28 4 12- 18 2.1- 3.2 19- 32 13- 22 3 4- 12 0.7- 2.1 7- 19 5 -13 2 1) < 4 < 0.7 < 7 < 5 1 1) No use of salt required. Electronic adjustment – The indicat
ملخص المحتوى في الصفحة رقم 7
electrolux 7 It is normal that water overflows from the When you set the water softener to level 1, salt container when you fill it with salt the salt indicator light does not stay on. Use of rinse aid 1. Press the release button (A) to open the Caution! Only use branded rinse aid for rinse aid dispenser. dishwashers. 2. Fill the rinse aid dispenser with rinse aid. Do not fill the rinse aid dispenser with The mark 'max.' shows the maximum other products (e.g. dishwasher clean- level . ing agent
ملخص المحتوى في الصفحة رقم 8
8 electrolux • While you load cutlery and dishes, do Cutlery basket these steps: Warning! Do not put long-bladed knives – Load hollow items (e.g. cups, glasses in a vertical position to prevent injury. and pans) with the opening down. – Make sure that water does not collect in Arrange long and/or sharp items of cutlery the container or in a deep base. horizontally in the primary basket. Be careful – Make sure that cutlery and dishes do not with sharp items such as knives. lie inside one another
ملخص المحتوى في الصفحة رقم 9
electrolux 9 Fill with detergent 1. Make sure that the detergent tablets are applicable for your water hardness. Refer Do these steps to fill the detergent dispenser: to the instructions from the manufacturer. 2. Set the lowest levels of water hardness and rinse aid dosage. It is not necessary to fill the salt container and the rinse aid dispenser. A Do these steps when the drying results B are not satisfactory: 1. Fill the rinse aid dispenser with rinse aid. 2. Set the rinse aid dosage to posi
ملخص المحتوى في الصفحة رقم 10
10 electrolux Energy Degree Type of Save op- Programme Programme description of soil load 1) tion Selectable, Normal Crockery Main wash up to 50°C no impact or light and cut- 1 intermediate rinse on washing soil lery Final rinse pro- gramme. 1) For programmes where the option has an impact, the energy saving is between 10% and 25%. 2) During the 'Auto' washing programme the level of soiling on the dishes is determined by how cloudy the water is. The programme duration, water and energy consumpt
ملخص المحتوى في الصفحة رقم 11
electrolux 11 Fill the detergent dispenser with detergent You can select the washing programme before you set a new washing programme. and delay start also with the door closed. When you press a programme button Interrupting a washing programme you have only 3 seconds to select a dif- Open the door. ferent washing programme or a delay • The programme stops. start. After these 3 seconds, the selec- Close the door. ted programme starts automatically. • The programme continues from the point End o
ملخص المحتوى في الصفحة رقم 12
12 electrolux Do these steps to remove the spray arm: 1. Turn the nut anticlockwise. 2. Remove the spray arm. 3. Fully clean the holes. External cleaning Clean the external surfaces of the appliance and control panel with a damp soft cloth. Do these steps to clean the filters: Only use neutral detergents. Do not use 1. Open the door. abrasive products, scouring pads or solvents 2. Remove the basket. (acetone, trichloroethylene etc...). 3. Remove the filters in the bottom of the appliance. Frost
ملخص المحتوى في الصفحة رقم 13
electrolux 13 Fault code and malfunction Possible cause and solution • • The water tap is blocked or furred with limescale. digital display shows Clean the water tap. The dishwasher does not fill with wa- • The water tap is closed. ter Open the water tap. • The filter in the water inlet hose is blocked. Clean the filter. • The connection of the water inlet hose is not correct. The hose can be kinked or squashed. Make sure that the connection is correct. • • There is a blockage in the sink spig
ملخص المحتوى في الصفحة رقم 14
14 electrolux The cleaning results are not satisfactory Dry water drop signs on • Increase rinse aid dosage. glasses and dishes • The detergent can be the cause. Installation Warning! Make sure that mains plug is Make sure that the dimensions of the recess disconnected from the mains socket agree with the given dimensions. during installation. Make sure that there are openings in the fur- niture for the inlet hose, the water drain hose Fitting the appliance and the mains cable. Put the applianc
ملخص المحتوى في الصفحة رقم 15
electrolux 15 Connect the inlet hose to a water tap with an external thread of 3/4”. If the water inlet hose is too short, replace the water inlet hose with an applicable, longer high-pressure hose. Do not connect an ex- tension hose. To suit the installation, it is possible to turn the end of the hose that is connected to the dishwasher. Do these steps : 1. Loosen the retaining nut. 2. Turn the hose. 3. Tighten the retaining nut. Warning! Make sure that the retaining nut and all other connecti
ملخص المحتوى في الصفحة رقم 16
16 electrolux Electrical connection Do not use multi-way plugs, connectors Warning! The manufacturer is not responsible if you do not follow these and extension cables. There is a risk of safety precautions. fire. Ground the appliance according to safe- Do not replace the mains cable yourself. ty precautions. Contact the Service Force Centre. Make sure that the rated voltage and Make sure that the mains plug is acces- type of power on the rating plate agree sible after installation. with the vo
ملخص المحتوى في الصفحة رقم 17
electrolux 17
ملخص المحتوى في الصفحة رقم 18
18 electrolux
ملخص المحتوى في الصفحة رقم 19
electrolux 19
ملخص المحتوى في الصفحة رقم 20
www.electrolux.com 156985870-00-052009
