ملخص المحتوى في الصفحة رقم 1
ملخص المحتوى في الصفحة رقم 2
ملخص المحتوى في الصفحة رقم 3
QUICK REFERENCE GUIDE Step 1 Checking the Package Contents Step 5 Setting Display Options Plug the AC adapter cord into the base unit and D charging cradle and then into a 120V AC outlet. Make sure you have received the following items in the package. If any of these items are missing or damaged, contact the Uniden Parts Department. • Base unit (1) • Handset (2) • AC adapter (2) • Rechargeable battery (2) • Telephone cord (1) • Beltclip (2) Place the handset in the base and place the other • Ch
ملخص المحتوى في الصفحة رقم 4
Contents Making Calls with Memory Dialing 28 Quick Reference Guide 3 Chain Dialing 29 Welcome/Features 5 Editing a Stored Name and/or Phone Number 30 Controls and Functions 6 Erasing a Stored Name and Phone Number 32 Getting Started RocketDial Setting up the Phone 8 RocketDial 33 Before Using, Register Second Handset Storing and Editing the RocketDial 33 to the Base Unit 13 Making Calls with the RocketDial 33 When to Re-register Handsets 14 Deleting the RocketDial 34 Call Transfer Feature 14 Ca
ملخص المحتوى في الصفحة رقم 5
Congratulations on your purchase of the Uniden Cordless Telephone. This cordless phone Welcome is designed and engineered to exacting standards for reliability, long life, and outstanding performance. Note: Some illustrations in this manual may differ from the actual unit for explanation purposes. The color of your cordless telephone may vary. • Dual Handsets • Tone/Pulse Dialing Features • 2.4GHz Extended Range Technology • Page/Find handset • 3 Line Backlit Display • Earpiece Volume Control
ملخص المحتوى في الصفحة رقم 6
Controls and Functions Dual Handsets 1. Handset antenna 2. Beltclip hole 3. Optional headset jack 1 4. Handset battery compartment 5. Handset earpiece 6. LCD display 7. cid/menu (Caller ID) key 5 8. talk/flash key 2 9. /tone/ (left cursor) key * 10. redial/pause key 6 11. select/channel key 13 12. Handset microphone and 7 14 3 ringer speaker 8 15 13. vol (volume)/ring/ (up) key 16 14. RocketDial key 15. end key 16. vol (volume)/ring/ (down) key 4 17. #/ (right cursor) key 9 17 18. mem (memory)
ملخص المحتوى في الصفحة رقم 7
Base 25 24 21 22 23 Charging Cradle 21. charge/in use LED 22. find handset key 26 23. Base charging contacts 24. Telephone line jack 25. DC IN 9V jack 26. Charging contacts 27. Charge LED 28. DC IN 9V jack 27 28 www.uniden.com CONTROLS AND FUNCTIONS [ 7 ]
ملخص المحتوى في الصفحة رقم 8
Setting up the Phone Do the following steps: A. Choose the best location C. Connect the base unit and charging cradle B. Install the rechargeable battery packs into both handsets If your home has A. Choose the best location specially wired alarm Before choosing a location for your new phone, read the INSTALLATION equipment connected to CONSIDERATIONS included in the PRECAUTIONS. Here are some important guidelines you the telephone line, be should consider: sure that installing the system does n
ملخص المحتوى في الصفحة رقم 9
GETTING STARTED B. Install the rechargeable battery packs into both handsets Both handsets are powered by rechargeable battery packs. The battery recharges automatically when the handset is placed in the base unit or charging cradle. Charge the handset battery packs for at least 15-20 hours • Use only the before using your new cordless telephone for the first Uniden (BT-905) time! To maximize the charge capacity of your battery pack, rechargeable battery DO NOT plug the telephone cord into the
ملخص المحتوى في الصفحة رقم 10
4) Place the battery case cover back on the handset by sliding it upwards until it clicks into place. 5) Place one handset in the base unit and one handset in the charging cradle for 15-20 hours without interruption. The base or charging cradle unit’s LED light (labeled charge/in use or charge) illuminates once the handset is placed in the base or charging cradle. The LED light will illuminate whether the battery pack is connected or not. If the base or charging cradle (charge/in use or charge)
ملخص المحتوى في الصفحة رقم 11
GETTING STARTED Low battery alert When the battery pack is very low and needs to be charged, the phone is programmed to eliminate functions in order to save Low Battery power. If the phone is not in use, “Low Battery“ appears on the LCD and none of the keys will operate. If the phone is in use, “Low Battery“ flashes and the handset • Even when the battery beeps. Complete your conversation as quickly as possible and pack is not being used, return the handset to either charging cradle for ch
ملخص المحتوى في الصفحة رقم 12
C. Connect the base unit and charging cradle 1) Connect each AC adapter to the DC IN 9V jack Route the cord. and to each standard 120V AC wall outlet. 2) Set the base and charging cradle on a desk or tabletop, and place one handset in the base unit Place the handset in and one in the charging cradle. the base or charging cradle with the 3) Raise the base antenna to a vertical position. keypad facing forward for charging. 4) Make sure that the charge/in use and charge LED illuminate. If the LE
ملخص المحتوى في الصفحة رقم 13
GETTING STARTED Before Using, Register Second Handset to the Base Unit When the dual handsets are removed from the packaging, the handset that is placed in the base unit first (to charge battery for 15-20 hours), will automatically be registered • When you charge the to the base unit. (It does not matter which handset you choose to place in the base handset, Caller ID unit first.) summary screen and the name of the You will also need to register the second handset by placing it in the base crad
ملخص المحتوى في الصفحة رقم 14
When to Re-register Handsets 1) You’ll need to re-register the second handset (follow steps on page 13) each time the digital security code is changed. Refer to page 41 for details regarding the Digital Security Code. 2) When there is a power failure for more than one hour: • If the second If power failure occurs (e.g. due to electrical storm or if the unit is unplugged during handset’s battery a move), both handsets will need to be re-registered. To re-register, follow the same becomes very low
ملخص المحتوى في الصفحة رقم 15
GETTING STARTED Mounting the Base Unit on a Wall Standard wall plate mounting This phone can be mounted on any standard wall plate. DO NOT use an AC 1) Plug the AC adapter into the DC IN 9V jack. outlet controlled by a wall switch. 2) Wrap the AC adapter cord inside the molded wiring channel as shown. 3) Plug the AC adapter into a standard 120V AC wall outlet. 4) Plug the telephone line cord into the TEL LINE jack. Wrap the cord inside the molded wiring channel as shown. 5) Plug the telephone
ملخص المحتوى في الصفحة رقم 16
Direct wall mounting If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following: • Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall. • Try to mount your phone within 5 feet of a working phone jack to avoid excessive lengths. • Make sure the wall material is capable of supporting the weight of the base and handset. • Use #10 screws (mini
ملخص المحتوى في الصفحة رقم 17
GETTING STARTED Setting Menu Options There are five setup options available. They are Caller ID options [AutoTalk, CIDCW (Caller ID on Call Waiting), Area Code], Dial Mode and Language. AutoTalk allows you to answer the phone without pressing the talk/flash key. If the phone rings when AutoTalk is On, simply remove the handset from the base or charging cradle and the phone automatically answers the call. If the phone rings when AutoTalk is Off, you must press the talk/flash key to answer the c
ملخص المحتوى في الصفحة رقم 18
To enter your Area Code If you enter a 3-digit area code number in the Area Code option, your local area code does not appear in Caller ID messages. Do not program this option, if your calling area requires 10-digit dialing. When reviewing Caller ID messages, you will see only the local seven digit number. For calls received from outside your local area code, you will see a full 10-digit number. • If your calling area requires 10-digit 1) When the phone is in standby mode, press and hold the d
ملخص المحتوى في الصفحة رقم 19
GETTING STARTED 1) When the phone is in the standby mode, press and hold the cid/menu key. The following screen appears. 2) Press the vol/ring/ key to select “Dial”. 3) Press the select/channel key to toggle between “Tone” and • Dialing mode can only “Pulse”. be changed from handset 1. To confirm 4) Press the end key and return the handset to the base unit to complete the setting. which handset is HS1, The handset returns to standby mode. look at the display indicating “HS1” or “HS2”. Setting t
ملخص المحتوى في الصفحة رقم 20
Making and Receiving Calls Handset On Base or Charging Cradle Handset Off Base or Charging Cradle Pick up the handset (AutoTalk: On) Press talk/flash (AutoTalk: Off), or To receive or pick up the handset and press press the talk/flash, any number, the a call Refer to page 17 the talk/flash key (AutoTalk: Off). /tone/ or #/ key (AutoTalk: On). * "Setting Menu Options" 1) Pick up the handset. 1) Press the talk/flash key. to turn On the AutoTalk feature if desired. 2) Press the talk/flash key. 2) L
