Audiovox ROSIBC دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Installation/Owners Manual
Model ROSIBC
Interior Color Camera
F FEATURES:
High Resolution, 1/3,CCD Color Camera
Adjustable Angle
Optical Control Infrared LED
Infrared LED for Night Vision
Mirror image selectable




Page 2
Congratulations on the purchase of the ROSIBC. This camera is
designed to be mounted inside the vehicle to either view an infant
strapped into a car seat that is buckled in facing the back seat or view the

ملخص المحتوى في الصفحة رقم 2

Installation 1: View of the Suction cup page 4 page 5 Installation 1: Suction cup 1. Locate and clean suitable mounting location on glass near baby seat side of vehicle. 2. Attach the camera suction cup to the selected mounting location. 3. Connect the camera cable to the extension cable provided with the rear view mirror. 4. Route the camera cable up to and under the headliner of the vehicle. 5. Route the extension cable up to the rearview mirror contro

ملخص المحتوى في الصفحة رقم 3

Page 7 Installation 2: Headliner pins 1. Remove the suction cup by rotating counter clockwise. 2. Locate suitable mounting location on headliner of vehicle. 3. Insert the mounting pin along opposite sides of camera into the headliner. Push the mounting pins into the headlines until pin hooks are at mounting tab. Place the pin hooks of mounting pin on mounting tabs. 3. Connect the camera cable to the extension cable provided with the rear view mirror. 4. Route the camera cable und

ملخص المحتوى في الصفحة رقم 4

Page 10 Specifications: 1. Signal System: NTSC 2. Voltage: DC 12V 3. Current: 70mA / 140mA (LED on) 4. Image Sensor: 1/3 Super CCD Color Sensor NTSC: 510X492 picture elements 5. Horizontal Definition: 420 Lines 6. View Angle: 90 degrees 7. Minimum Illumination: 0 Lux 8. Outer Dimension: Ф55X60 9. Weight: 70 g

ملخص المحتوى في الصفحة رقم 5

© 2005 Audiovox Electronics Corp., 150 Marcus Blvd., Hauppauge, N.Y. 11788 128-7366