Dakota Digital LED Tail Lights for 1968 Impala LAT-NR251 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

INSTALLATION INSTRUCTIONS
LAT-NR251
LED Tail Lights for 1968 Impala

MAN#650211

Kit Includes:

Installation:

1. Remove all tail light lenses as described below while taking care to keep
the lenses with their housings.
2. Remove the three screws that hold the lens in and remove the lens from
the housing.
3. Remove the light bulb from socket.

4. Now is a good time to clean the lenses and the tail light housings. If the
lenses are in poor condition a replacement set is re

ملخص المحتوى في الصفحة رقم 2

8. Insert the bulb base from the LED assemblies into the bulb sockets. Test the assemblies for tail lights and brake functions to make sure they work as expected before going on. 9. Remove the backing from the tape on the LED assembly and insert assembly into the tail light housing, making sure to keep the assembly centered in housing. Press firmly on the bracket to ensure good tape bonding. 10. Reinstall the tail light lenses and secure with the lens screws. 11. Test the tail lights