Harbor Freight Tools 93229 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

4” RED FLUSH-MOUNT TAIL LIGHT
4” AMBER FLUSH-MOUNT TAIL LIGHT
93228
93229
ASSEMBLY & OPERATING INSTRUCTIONS
Due to continuing improvements, actual product may differ slightly from the product described herein.
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web Site at www.harborfreight.com
©
®
Copyright 2005 by Harbor Freight Tools . All rights reserved. No portion of this manual or
any artwork contained herein may be reproduced in any shape or form without the
express written consen

ملخص المحتوى في الصفحة رقم 2

THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please complete the owner’s record below: Model______________ Serial No.____________ Purchase Date_______________ SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the entire manual to become familiar with the unit BEFORE you begin assembly. The Flush Mount Tail Light provides stop, turn and tail light functions. Technical Specifications Technical specifications are the same for both #9

ملخص المحتوى في الصفحة رقم 3

9. Do not allow children to play with the Flush Mount Tail Light. 10. Always check hardware and assembled parts after assembling. All connections should be tight and hardware tightened. 11. Make certain to follow all local laws regarding vehicles and Tail Lights. 12. Do not cut or rewire any part of the Tail Light. 13. Make certain the vehicle is turned off before doing any maintenance. Warning: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possi

ملخص المحتوى في الصفحة رقم 4

Installing the Light Bulb 1. Use a light bulb of the type described on page 2. Gently grasp and twist the Bulb Housing (2) and pull it out from the main Tail Light (1) - see Figure 1. Figure 1 Bulb Housing (2) 2. Line up pins on the light bulb with the grooves on the Bulb Housing (2) and slide the Light Bulb into place. 3. Verify that the Light Bulb is securely in place. Thread the Bulb Housing back into the main Tail Light (1). Note: When mounting the Tail Lights to a trailer, both the forwar