ملخص المحتوى في الصفحة رقم 1
UBB-4.0 MOBILE DVR SYSTEM
USER MANUAL
Congratulations on your choice of a Crimestopper Mobile DVR System.
This installation book is designed for the installer or individual with an existing
understanding of automotive electrical systems, along with the ability to test and connect
wires for proper operation. To ease installation, we suggest that you READ THIS
MANUAL before beginning your installation. This book is provided as a GENERAL
GUIDELINE and the information contained here
ملخص المحتوى في الصفحة رقم 2
ملخص المحتوى في الصفحة رقم 3
Power Port Description Power Connect Description 1. YELLOW ---------------TO BATTERY IN. 2. RED ---------------------TO ACC IN. 3. BROWN ----------------TO DOOR TRIGGER (–). 4. BROWN/WHITE------TO DOOR TRIGGER (+). 5. GREEN -----------------TO HANDBRAKE. 6. BLUE --------------------DC 12V OUT (200mA).(Connect indoor camera power) 7. WHITE ------------------TO PARKING LIGHT. 8. WHITE / RED----------TO REVERSE. 9. PINK/WHITE-----------NC. 10. PINK ---------------------NC. 1
ملخص المحتوى في الصفحة رقم 4
Menu Structure MENU Set Clock Adjust time/date. Format: hh:mm:ss, mm/dd/yy TV Output System NTSC/PAL two systems output selection. NTSC/PAL two systems CCD video input Video Input System selection. Even user selection not correct, DVR still can get the video. Format SD card to FAT format. This operation SD Card Format will erase all folders/files which inside card. Recording intervals of DVR after Ignition ON. If user selects “0 seconds”, then box will bypass Boot Up Indoor boo
ملخص المحتوى في الصفحة رقم 5
DVR Operation Algorithm (1) ACC On Before Door Open: Boot Up Indoor Record Interval: Default = 0 seconds Choices = 0 seconds / 10 seconds / 20 seconds / 30 seconds / OFF (No Dome Trigger) Force to record indoor CCD (V3) for user specify time interval and then switch to front CCD (V1). Every 5 minutes will generate one new video file to record contiguously. (2) Door Open without ACC On: Ignition Off Dome Record Interval: Default = 30 seconds. Choices = 30 seconds / 1 minute / 2 minutes /
ملخص المحتوى في الصفحة رقم 6
DVR Specification (1) Power: Input voltage support 9-36V DC, power consumption 2.7W(12V)，standby current is 10mA. (2) DC 12V output: We support one DC 12Volt/200mA output to dedicate to connect indoor CCD (V3) power. DVR Box can control the V3 camera power on when dome open at ignition off. Otherwise, the V3 camera will no power to let it working when ignition off. (3) SD card: Right now we only support maximum 4GBytes standard SD card only. SDHC Card Not Supported. We suggest no using t
ملخص المحتوى في الصفحة رقم 7
4. MENU OPERATION Press MENU key to enter System setup. Setup the correct values according to your requirements. After setup is finished，press EXIT key to memorize and Exit Menu. If EXIT key is not pressed to leave，the DVR will not memorize the value which user changed。 Set Clock Under Set Clock item, press OK key to enter Clock Adjust. Please use pq key to adjust the value and use tu key to change another item. One by one item to setup until back to Set Clock item picture.
ملخص المحتوى في الصفحة رقم 8
Video Input System Please setup correct format according to their CCD camera TV system . Even with setup not correct, box still can get the video in, but image quality maybe not good. Default value of this item is “NTSC”. SD Card Format User can use this function to format SD card to our box needed format. This operation will erase all files which inside SD card. In general, user don’t need to use this item to format if use whole new SD card.
ملخص المحتوى في الصفحة رقم 9
Boot Up Indoor Record Interval The DVR will record the Indoor camera (V3) for time interval of this value after Ignition on (ACC ON). If user selects “0 seconds”, the DVR will bypass Boot Up Indoor Record (record V1 immediately after ignition on). If you select “OFF”, that means box will bypass all door trigger event function. That means box will not record indoor camera any more when door open/close. Default value = 0 seconds. Ignition Off Do
ملخص المحتوى في الصفحة رقم 10
Play Back Selection In this selection, you can playback video files directly from the DVR without removing the SD card. You need to select which area to playback. After selecting the area which you want, the DVR will create the file list which in this area. Box will use the file’s name and record start data/time to be the file list. Press the Up/Down key to move cursor to select file, and press “OK” key to start playback of current selected video
ملخص المحتوى في الصفحة رقم 11
EXAMPLE: Normal speed à press right key à 2X speed à press right key à 4X speed à press right key à normal speed. Normal speed à press left key à -2X speed à press left key à -4X speed à press left key à normal speed. S/W Version This page displays the software version of the DVR.
ملخص المحتوى في الصفحة رقم 12
ONLINE TECHNICAL SUPPORT www.crimestopper.com www.crimestopper.com Phone (800) 998-6880 FAX (805) 581-9500 © 2009Crimestopper Security Products
