ملخص المحتوى في الصفحة رقم 1
INSTRUCTION MANUAL
Mobile Digital 4-Channel Video Recorder
EDSR400M
V1.0
About this manual
Before installing and using this unit, please read this Manual carefully.
Be sure to keep it handy for later reference.
ملخص المحتوى في الصفحة رقم 2
Safety Warning WARNING TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Note: This equipment has been tested and found to comply with the limits for a Class A digital device, The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This is a
ملخص المحتوى في الصفحة رقم 3
Safety Precautions Safety Precautions Refer all work related to the installation of this product to qualified service personnel or system installers. Do not block the ventilation opening or slots on the cover. Do not drop metallic parts through slots.This could permanently damage the appliance. Turn the power off immediately and contact qualified service personnel for service. Do not attempt to disassemble the appliance.To prevent electric shock, do not remove screws or covers. There
ملخص المحتوى في الصفحة رقم 4
Safety Precautions Safety Precautions The lightning flash with an arrowhead symbol, within an Warning: equilateral triangle, is intended to alert the user to the presence Electrostatic-sensitive device. Use proper of uninsulated ” dangerous voltage” within the product’s enclosure CMOS/MOSFET handing precautions to avoid that may be of sufficient magnitude to constitute a risk of electric electrostatic discharge. shock to persons The exclamation point within an equilateral triangle is intende
ملخص المحتوى في الصفحة رقم 5
Important Safeguards Important Safeguards Read Instruction---All the safety and operating instructions should be read before the init is operated Retain Instructions---The safety and operating instructions should be retained for future reference. Heed Warnings—All warnings on the unit and in the operating instructions should be adhered to. Follow Instructions—All operating and use instructions should be followed Cleaning—Unplug the unit from the outlet before cleaning. Do not use liquid cleaners
ملخص المحتوى في الصفحة رقم 6
Important Safeguards Important Safeguards and Warnings before Installation
ملخص المحتوى في الصفحة رقم 7
Quick Install Guide The DVR can be mounted horizontally (suspend or support mounted). Interface Support EDSR400M EDSR400M Suspend Interface Show all the possible ways to mount the DVR. Use the two Z-brackets supplied to mount it in any ways shown. EDSR400M Support EDSR400M Suspend
ملخص المحتوى في الصفحة رقم 8
Quick Install Guide Quick Install Guide : 1.Unpack Everything Make sure you have everything you need before you begin the installation. 2.Equipment Required The following tools may help you to complete the installation: •Drill •Screwdrivers •Wire cutters 3. Choosing the Location Choose a location for installation that: •Provide convenient access for installing or removing the hard drive •Allows air to flow around the fan vents. Inadequate or improper air flow can impede proper operation of the
ملخص المحتوى في الصفحة رقم 9
Quick Install Guide Possible Installation Locations Inside the Automobile Vehicle: TOYOTA CAMRY Glove box (inside or underneath) Truck ( Suggest user “ suspend” for mounting option) Passenger seat (underneath) Drive seat ( between seat and wall) Show the wiring on the wiring harness that connects to the electrical system. Vehicle body + - Car body DVR On/Off switch - Fuse(5A or 10A) Vehicle battery (+12V or +24V) Key start Spilt filter - Generator + +
ملخص المحتوى في الصفحة رقم 10
Quick Install Guide Truck Possible Installation Locations Inside the Automobile Vehicle: Glove box (inside or underneath) Drive seat ( between seat and wall) or Passenger seat (underneath) ( Suggest user use “ support” for mounting option) Show the wiring on the wiring harness that connects to the electrical system. Vehicle body + - Car body DVR On/Off switch - Fuse(5A) Vehicle battery (+24V) Key start Spilt filter - Generator + +
ملخص المحتوى في الصفحة رقم 11
Quick Install Guide Installing the Camera(s) and Monitor The DVR is typically connected to one camera installed inside the car. Other camera(s) can also be installed in different location(for example, use the waterproof camera to the outside of vehicle ). For installation procedure, refer to the guide that came with the camera(s) you purchased. The Monitor power supply connect from the Automotive adapter(cigarette plug) Monitor and cameras must be purchased separately. LCD Monitor LCD Monit
ملخص المحتوى في الصفحة رقم 12
Quick Install Guide Installing the Hard Drive As following are the figure for the 3.5” and 2.5” HDD. Figure shows 3.5“ HDD Figure shows 2.5“ HDD
ملخص المحتوى في الصفحة رقم 13
Table of Contents 1. Product Overview……….…...……………………………………………………………………… 1 1.1 Feature………...…………….….…………………………………….…………..……………….……1 1.2 Specifications…………….…...………….………………….……………..……….…….…………………………………..2 2. Front & Rear Panels………...…….………………………………………..………………………..3 3. Back Panel Connections…….………...……………………………………..……………………..5 4. System Connection…....………………………...…………………………..…………….………...8 4.1 Before Installation……..………………………………………………..……………………………..…………8 …9 …………………………………………………………………………………………………….
ملخص المحتوى في الصفحة رقم 14
Table of Contents 10. Interface Specifications……..………...………………………………………………………44 10.1 Transmission setting……..……………………………..………………………….…………………………………..44 10.2 Remote Control Protocol…………………………………..………………………………………………………..…45 11. Remote Controller………….…….……………………………………………………….……49 12. Appendix-A/Time Lapse Mode Recording Time…….……..…………………………..…50 12.1 Recording with and 80 GB HDD…..…………...………………….…………………………………………………..50 12.2 Recording with and 160 GB HDD…………..………………………………………………………………………….51 13.View
ملخص المحتوى في الصفحة رقم 15
Product Overview and Features 1. Product Overview The EDSR400M is the first full-featured digital video recorder designed specifically for use in mobile applications. It features a superior image quality, easy to use VCR-styles controls and a rugged construction that will withstand high levels of vibration and humidity. The EDSR400M is ideal for use in bused, cars, police cruisers, or any application requiring a rugged digital recorder. Video and audio can be recorded at speeds up to 60/50 fi
ملخص المحتوى في الصفحة رقم 16
Specifications 1.2 Specifications Video Input 4 camera inputs (BNC),1Vp-p/75ohm Video Output 1 BNC video out (1Vp-p/75 ohm) for Main Monitor 1 BNC video out (1Vp-p/75 ohm) for CALL Monitor 4 video out (1Vp-p/75ohm)for looping Video Compression M-JPEG Recording Resolution 720x484 (NTSC); 720x576 (PAL) CompactFlash Memory Yes, Built-in Compact Flash card slot Alarm Input 4 alarm inputs Alarm Output 1 alarm output Video Display Full, PIP, Quad and 2x2 zoom for Live and Playback Video Loss Detec
ملخص المحتوى في الصفحة رقم 17
Front Panel Keypads 2. Front Panel Keypads 2 3 4 5 6 7 17 18 1 19 8 EDSR400M 22 16 13 14 15 21 20 9 10 11 12 KEY 1 ~ CH1 ~CH4:. 4 Press channel key (1~4) to display video image in the full screen format , the picture of the corresponding will fill the whole screen of the monitor display. 5 Switch PIP/Quad. MODE: 6 ZOOM: Press this key while viewing the full screen image to display a magnified resolution on the monitor. SEQ : Press this key to enter the auto sequential switching mode. 7 8 MENU
ملخص المحتوى في الصفحة رقم 18
16 Display: Press this key to switch ON/OFF. CH1 CH2 CH1 CH2 2003/04/22 2003/04/22 10:41:00 10:42:00 LIVE: 60IPS Disk:120 GB(0) DISK:80G CH3 CH4 CH3 CH4 Display Date/Time and titles Display OFF 17 HDD KEY: Protect HDD without steal and Turn on HDD power 18 Hard Disk Tray: Hard Disk holder for HDD. 19 Shuttle and Jog Dial Shuttle : In Playback mode, turn the shuttle dial can fast forward/rewind the picture. In Pause mode, turn the shuttle dial can slow forward/rewind the picture. Jog Dial : In
ملخص المحتوى في الصفحة رقم 19
Back Panel Connections MONITOR 3 MAIN MONITOR : This connector is used for the Main monitor display, A number of different display modes may be selected for viewing. 4 CALL MONITOR : This connector is used for the Call(secondary) monitor. This monitor can only display full screen. ( Internal circuit ) SW3 MAIN MONITOR A INTERNAL MONITOR OUT VIDEO When the machine is in Menu, Search or Copy mode, the internal Video is switched to Monitor Out, so that the user can view full screen OSD. In other m
ملخص المحتوى في الصفحة رقم 20
Back Panel Connections 3. Back Panel Connections 10 8 6 1 2 4 3 5 7 9 POWER 1 Main Power plug: Connect the DC12~24V power source to the power input terminal. AUDIO 2 Audio IN : Audio input for recording. Audio OUT : Audio output can be set to “ON” or “OFF” in Setup Menu. ( Internal circuit ) SW2 OFF / Mute SW1 Playback Audio A Audio OUT Audio IN Operation of SW2 : Operation of SW1 : When in recording or standby mode, When Playback Audio is enabled then the output the out of SW1 is connect
