ملخص المحتوى في الصفحة رقم 1
e
1 2 3 4 5 6 7 8
A B
{F}
9 10 11 12 13 14 15 16
StoreSafe
Kalatel DVMRe StoreSafe
Kalatel DVMRe StoreSafe
Digital Video Multiplexer Recorder
User Manual
ملخص المحتوى في الصفحة رقم 2
WARNING! To prevent fire and electric shock, do not expose this product to rain or moisture. ! The exclamation point, within an equilateral The lightning flash with the arrowhead symbol, triangle, is intended to alert the user to the within an equilateral triangle, is intended to alert presence of important operating and maintenance the user to the presence of uninsulated (servicing) instructions in the literature "dangerous voltage" within the products enclosure accompanying t
ملخص المحتوى في الصفحة رقم 3
IMPORTANT INFORMATION Software and/or firmware is furnished to the purchaser under a license for use on a single system. Software and/or firmware included with this equipment are the sole proprietary property of, confidential to, and copyrighted by GE-Interlogix Kalatel Division, Corvallis, Oregon, USA. The software/firmware are not to be copied or disclosed in any manner without the express written consent of GE-Interlogix. All informat
ملخص المحتوى في الصفحة رقم 4
Contents 1 StoreSafe Overview...............................................................................................7 1.1 Products Featured In This Manual ...................................................................................7 1.2 Product Description..........................................................................................................7 1.3 Passwords........................................................................................................
ملخص المحتوى في الصفحة رقم 5
3.17 Front Panel Lock ............................................................................................................52 3.18 Factory Settings.............................................................................................................52 3.19 Passwords......................................................................................................................53 3.20 The Operator Menu..........................................................................
ملخص المحتوى في الصفحة رقم 6
0150-0229D 6 Kalatel DVMRe StoreSafe
ملخص المحتوى في الصفحة رقم 7
1 StoreSafe Overview 1.1 Products Featured In This Manual StoreSafe StoreSafe Advanced 1.2 Product Description StoreSafe is a video multiplexer capable of recording from multiple cameras to an internal hard drive while simultaneously providing playback. Unlike outdated time-lapse VCRs, StoreSafe records high- resolution pictures. Digital recording improves playback quality over VCRs, and eliminates the hassle of cleaning heads, changing tapes or servicing motors. Depending on the set
ملخص المحتوى في الصفحة رقم 8
1.3 Passwords Passwords are provided to limit access to menus and certain functions. Two levels of password security are provided: • Operator: Limited menu access, only the Operator menu is available. • Installer: Complete menu access, both the Main and Operator menus are available. As a security measure, it is recommended that the Operator and Installer passwords be changed after installation is complete (see section 3.19). Store the passwords in the administrator’s secure files. D
ملخص المحتوى في الصفحة رقم 9
1.4 Unpacking Check the package and contents for visible damage. If any components are damaged or missing, do not attempt to use the unit, contact the supplier immediately. If the unit must be returned, it must be shipped in the original packing box. Package Contents • The StoreSafe unit. • The Alarm Interface Circuit Board (P/N 0090-0077). • Accessory PCB (P/N 0900-0127). Advanced models only. • The User Manual (P/N 0150-0229). • A WaveReader Software CD (P/N 0151-0005-27W21 or later
ملخص المحتوى في الصفحة رقم 10
1.7 The Back Panel 1 2 1 2 3 4 5 6 7 8 B 6 8 10 12V DC AUDIO ETHERNET RS-485/1 10/100 9 10 11 12 13 14 15 16 RS-232/1 RS-485/2 RS-232/2 3 4 5 7 9 1. Camera Inputs: BNC connector, looping. Auto Terminating. 2. Composite Monitor-A and -B Output: Composite video output with BNC style connector. 3. Power Input: For connecting the power supply. 4. Alarm I/O: For connecting alarm inputs, and alarm output relays. 5. RS232 Port 1: For modem connection and external control of the unit. 6.
ملخص المحتوى في الصفحة رقم 11
Signal A13 COM2 A12 Vext A11 ACK A10 NO2 A9 COM1 A8 GND GND PIN 13 25 12 24 11 23 10 22 9 21 8 20 20 PIN 1 14 2 15 3 16 4 17 5 18 6 19 7 Signal A1 A14 A2 A15 A3 A16 A4 NO1 A5 GND A6 GND A7 Composite Monitor Output When connecting directly from StoreSafe to the Cable: 75-Ohm Coaxial monitor, select the 75-Ohm impedance setting on the Connectors: BNC monitor. If an additional device is connected to the monitor’s looping output, set the termination of the additional device as 75-Ohm, and
ملخص المحتوى في الصفحة رقم 12
External Alarm Acknowledge Input Connect a switch or similar device to ground this pin in order External Device: Normally Open to acknowledge an alarm condition, and silence associated Zero potential relay contact. buzzers and relays. Connect from pin 23 to either pin 18, 19, or 20 (ground pins). All specifications subject to change without notice. GE-Interlogix believes all specifications NOTE to be correct at time of printing, but no liability is assumed for omissions or errors.
ملخص المحتوى في الصفحة رقم 13
RJ-45 Pin Configuration For Ethernet Port Pin Use Pin Use 1 2 3 4 5 6 7 8 1 TX+ 5 Not Connected 2 TX- 6 RX- 3 RX+ 7 Not Connected 4 Not Connected 8 Not Connected RJ-45 socket on back panel. RS232 Port 1 For a Modem connection or remote control of unit. See section 3.16 for information about configuring the modem settings in the menu system. See section 9 for RS232 Remote Control Protocols. DB-9 Pin Configuration For Port 1 Pin Use Pin Use Pin Use 1 5 1 DC
ملخص المحتوى في الصفحة رقم 14
Check Video Input Quality Check the picture quality by selecting each camera for full screen display. If the picture quality is poor, check the following items: • The BNC connections. • The loop-through terminations. • The video levels of incoming signals. • The possibility of ground loops. • Consult the camera’s installation instructions for additional information about proper camera setup. Check Record And Playback Quality Record for at least three minutes at the default record rate.
ملخص المحتوى في الصفحة رقم 15
2 StoreSafe Basic Operations 2.1 Principal Operating Modes StoreSafe has five principal modes of operation: • Live Viewing. • Printing. • Playback. • Archiving to CD. • Recording. Each mode is discussed in detail later in this section. 2.2 The Front Panel 10 11 12 13 14 15 16 17 18 19 20 21 e 1 2 3 4 5 6 7 8 A B {F} 9 10 11 12 13 14 15 16 StoreSafe 1 2 3 4 5 6 7 8 9 10-Channel 16-Channel 4-Channel 9-Way 4-Way 16-Way 9-Way 4-Way 10-Way 13-Way 4-Way PIP PIP 1. Power Indicator: Indic
ملخص المحتوى في الصفحة رقم 16
10. CD Recorder: For recording data to CD. 11. Record CD Button: One-touch archiving of selected video onto CD using the built-in CD-Writer. 12. Print Image Button: One-touch printing of displayed image. 13. Record Button: Used to Start and Stop Recording. 14. Reverse Play Button: Playback in Reverse. 15. Freeze Button (Pause): Freezes camera images on-screen in Live mode. Pauses Playback. 16. Stop Button: To stop Playback and return to Live mode. 17. Play Forward Button: Begins Playback
ملخص المحتوى في الصفحة رقم 17
Zooming To activate the 2x digital zoom, select the full screen display of the camera you wish to zoom, then press the Zoom button. Zooming will be indicated by the LED located directly above the Zoom button. Zooming is also indicated as ZOOM on the primary monitor. Zooming works with frozen and non-frozen images. Zoomed images can also be frozen. Zoom Button While Zoomed, rotate the Jog/Shuttle to Pan and Tilt across the image. with LED Please note, the camera does not move duri
ملخص المحتوى في الصفحة رقم 18
Fast Forward During playback, rotate the Shuttle (the outer dial) clockwise to view data at a higher than normal rate. Increasing the amount of rotation increases the rate of playback. Jog / Shuttle AutoPause During playback, moving the Jog (the inner dial) in any direction will freeze playback. Depress the Freeze or any play button to continue playback. Rewind During playback, rotate the Shuttle counter-clockwise to view data (in reverse) at a higher than normal rate. Increa
ملخص المحتوى في الصفحة رقم 19
Multiscreen Display With Sequencing If a multiscreen display does not include all of the cameras, the remaining cameras can be sequenced in the bottom right cameo. While in a multiscreen display, press the Sequence button to begin sequencing. For detailed information about sequencing, see section 2.8. This feature is not available on the 4-channel units. Full Screen Display Select any camera for Full Screen display by pressing the Number button of 1 the desired camera. Pressing the
ملخص المحتوى في الصفحة رقم 20
2.5 Recording To begin recording, press the Record button. Recording will be indicated by the LED located directly above the Record button. The unit always starts recording at the end of previously recorded data. The unit will continue recording until the Record Button record button is pressed again, unless Record Lock is ON. StoreSafe also remembers its current record mode in the event of power loss. If the unit was recording during a power loss, then when power is restored the unit
