Pelco 5104DVD-1500 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

INSTALLATION
DVR5100 Series
Hybrid Video Recorder
RAM Upgrade Kit
C3649M (7/08)

ملخص المحتوى في الصفحة رقم 2

2 C3649M (7/08)

ملخص المحتوى في الصفحة رقم 3

Description Use the DVR5100-RAM memory upgrade kit to install additional random access memory (RAM) into any of the following models of the DVR5100 Series hybrid video recorder: • DVR5104DVD-250 • DVR5104DVD-500 • DVR5104DVD-1000 • DVR5104DVD-1500 • DVR5104DVD-2000 • DVR5108DVD-250 • DVR5108DVD-500 • DVR5108DVD-1000 • DVR5108DVD-1500 • DVR5108DVD-2000 • DVR5116DVD-250 • DVR5116DVD-500 • DVR5116DVD-1000 • DVR5116DVD-1500 • DVR5116DVD-2000 PARTS AND TOOLS WARNING: This kit includes one RAM card u

ملخص المحتوى في الصفحة رقم 4

Installing the DVR5100-RAM Upgrade GETTING STARTED 1. Familiarize yourself with the instructions in this document. 2. Verify that you have all the necessary parts and tools (refer to Parts and Tools on page 3). PREPARING THE UNIT 1. Shut down the DVR5100 as follows. If you are already logged on, use the on-screen menus to log off and proceed with the following steps. For security purposes, the unit can only be shut down with Administrator-level permissions. a. From the Login screen, select the

ملخص المحتوى في الصفحة رقم 5

INSTALLING THE UPGRADE WARNING: Install only the DVR5100-RAM memory upgrade kit that you received from the Pelco factory. 1. Locate the empty memory slot in the upper-right rear of the unit (refer to Figure 3). BACK MEMORY SLOTS FRONT Figure 3. Locating the Memory Slots 2. Open the memory card clips, if not already open (refer to Figure 4). Figure 4. Opening the Memory Card Clips C3649M (7/08) 5

ملخص المحتوى في الصفحة رقم 6

3. Place the RAM card into the empty slot, and then press down until the clips engage (refer to Figure 5). Do not force the clips to engage manually as the memory card may not be properly seated. Figure 5. Inserting the Memory Card REASSEMBLING THE UNIT 1. Replace the chassis cover using the screws you removed from the sides and rear of the unit (refer to Figure 1 on page 4). 2. Reinstall the unit in a rack enclosure, if necessary, and then reconnect all cables and peripheral equipment you remo

ملخص المحتوى في الصفحة رقم 7

PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in Pelco assumes no risk and shall be subject to no liability for damages or loss material or workmanship for a period of one year after the date of shipment. resulting from the specific use or application made of the Products. Pelco’s liability for any claim, whether based on breach of contract, negligence, infringement of Exceptions to this warranty are as noted below

ملخص المحتوى في الصفحة رقم 8

Worldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada Tel: (800) 289-9100 Fax: (800) 289-9150 International Tel: +1 (559) 292-1981 Fax: +1 (559) 348-1120 www.pelco.com ISO9001 Australia Finland France Germany Italy Macau The Netherlands Russia Singapore | | | | | | | | South Africa Spain Sweden United Arab Emirates United Kingdom United States | | | | |