ملخص المحتوى في الصفحة رقم 1
BP68-00429A-00Eng 11/10/04 3:18 PM Page 1
HL-P4667W/HL-P5067W/HL-P5667W/HL-P6167W
List of Parts
Once you have unpacked your TV, check to make sure that you have all the
Accessories
parts shown here. If any piece is missing or broken, call your dealer.
Instruction Manual/
Warranty Cards (2)/
Remote Control (BP59-00076A)/
Safety Guide/
AAA Batteries Registration Card (1)
Quick Guide/
Anynet Manual /
Manual Guide
Anynet Cable
BP68-00429A-01
Downloaded from www.Manualslib.com manuals search engin
ملخص المحتوى في الصفحة رقم 2
BP68-00429A-00Eng 11/10/04 3:18 PM Page 2 Connecting VHF and UHF Antennas If you do not have a cable system, you will need to connect an antenna to your TV. Antennas with 300-ohm Flat Twin Leads If your antenna looks like this: it has 300-ohm flat twin leads. Place the wires from the twin leads under the 1 screws on the 300-75 ohm adaptor (not supplied). Use a screwdriver to tighten the screws. Plug the adapter into the “Air IN” terminal on the 2 rear panel. Antennas w
ملخص المحتوى في الصفحة رقم 3
BP68-00429A-00Eng 11/10/04 3:18 PM Page 3 Connecting Cable TV and VCR You can connect different cable systems to your TV, including cable without a cable box, and cable with a cable box that descrambles some or all channels. Cable without a Cable Box If you want to connect cable, and you do not need to use a cable box: Plug the incoming cable into the “Cable IN” terminal 1 on the rear panel. Cable with a Cable Box that Descrambles All Channels Find the cable that is connected to the ANTENNA 1
ملخص المحتوى في الصفحة رقم 4
BP68-00429A-00Eng 11/10/04 3:18 PM Page 4 Connecting an Analog Cable Converter Box and a VCR This connection allows you to watch and TV Rear Panel record basic and premium cable channels, as well as watch videotapes. You should keep your TV selected to “Cable IN” so that you can use the TV’s features. When view- From Cable ing premium channels or recording with the VCR, select “Air IN” (whichever channel is vacant in your area), then use the converter box to change channels. Caution: If you
ملخص المحتوى في الصفحة رقم 5
BP68-00429A-00Eng 11/11/04 9:34 AM Page 5 Connecting a Camcorder The side panel jacks on your TV make it easy to connect a Camcorder to your TV. You can use your camcorder to view tapes without using a VCR. Locate the A/V output jacks on the 1 camcorder. They are usually found on the side or back of the camcorder. 1 Camcorder Connect a set of audio cables Output Jacks 2 between the AUDIO IN jacks on the TV and the AUDIO OUT jacks on the camcorder. If you have a mono TV Rear of right side Cam
ملخص المحتوى في الصفحة رقم 6
BP68-00429A-00Eng 11/11/04 9:34 AM Page 6 Connecting to Audio and Video Jacks Connect a set of audio cables 1 TV Rear Panel between the Audio in (1 or 2) jacks on the TV and the AUDIO OUT jacks on the DVD player. Incoming Cable or Antenna Connect a video cable between the 2 VIDEO IN (1 or 2) jack on the TV and the VIDEO OUT jack on the DVD player. 2 1 DVD Player Connecting a DTV Set-Top Box Connecting to Y,PB,PR Connect a set of audio cables 1 TV Rear Panel between the COMPONENT (1 or 2) aud
ملخص المحتوى في الصفحة رقم 7
BP68-00429A-00Eng 11/10/04 3:18 PM Page 7 Connecting to DVI (Digital Visual Interface) Connect a set of audio cables 1 TV Rear Panel between the DVI audio (L,R) in jacks on the TV and the AUDIO OUT jacks on the Set-Top Box. Connect an HDMI/DVI video cable 2 between the HDMI/DVI IN jack on the TV and the DVI OUT jack on the Set-Top Box. 2 1 • Requires a Cable Converter. Incoming Cable or Antenna DTV Set-Top Box Connecting to HDMI (High Definition Multimedia Interface) Connect an HDMI cable be
ملخص المحتوى في الصفحة رقم 8
BP68-00429A-00Eng 11/10/04 3:18 PM Page 8 Connecting a Digital Audio System There are many types of digital audio systems on the market today. A simplified illustration of an audio system is shown below. For more information, see your audio system owner’s manual. If your audio system has a optical dig- 1 TV Rear Panel ital audio input, connect to the “DIGI- TAL AUDIO OUT(OPTICAL)” jack on the TV. Be certain to remove the black cover from the optical output before insert- ing the cable. • OPTI
ملخص المحتوى في الصفحة رقم 9
BP68-00429A-00Eng 11/12/04 9:30 AM Page 9 Remote Control You can use the remote control up to about 23 feet from the TV. When using the remote control, always point it directly at the TV. You can also use your remote control to operate your VCR, Cable box, DVD player or Samsung Set-Top Box. Œ POWER ˜ EXIT Press to exit the menu. Turns the TV on and off. ¯ ▲, ▼, œ, √, ENTER ´ P.MODE Press to select highlight up, down, Adjust the TV picture by selecting left, or right. While using the on- one o
ملخص المحتوى في الصفحة رقم 10
BP68-00429A-01Eng 11/18/04 9:04 AM Page 10 Turning the TV On and Off Press the POWER button on the remote control. You can also use the POWER button on the front panel. Viewing the Menus and On-Screen Displays The on-screen menu system allows you to control the settings of your TV. Access the on- screen menu system by pressing the Menu button on the remote control. Once the on- screen menu appears, use the …/†/œ/√/ENTER buttons on your remote control to select menu items and make adjustments.
ملخص المحتوى في الصفحة رقم 11
BP68-00429A-00Eng 11/10/04 3:18 PM Page 11 Memorizing the Channels Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cable channels. After the available channels are memorized, use the CH and CH buttons to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding and deleting chan-
ملخص المحتوى في الصفحة رقم 12
BP68-00429A-00Eng 11/10/04 3:18 PM Page 12 Press the … or † button to select the Press the √ button to select “Start”, then 4 5 Antenna connection, then press the press the ENTER button to start the auto ENTER button. program. The TV begins memorizing all available stations. Press the ENTER but- • Air : “Air” antenna signal ton at any time to interrupt the memoriza- Cable : “Cable” antenna signal tion process. Air+Cable : “Air” and “Cable” antenna Press the EXIT button to exit. signals • The
ملخص المحتوى في الصفحة رقم 13
BP68-00429A-00Eng 11/12/04 9:30 AM Page 13 Viewing an External Signal Source Use the remote control to switch between viewing signals from connected equipment, such as a VCR, DVD, Set-Top box or the TV source (broadcast or cable). Setting the Signal Source Press the MENU button. Press the Press the ENTER button to select 1 2 ENTER button to select “Input”. “Source List”. Press the … or † button to select a signal source, then press the ENTER button. Source List Input Input TV AV1 --- Input So
ملخص المحتوى في الصفحة رقم 14
BP68-00429A-00Eng 11/15/04 1:55 PM Page 14 Replacing the Lamp Why do I need to replace the lamp? The lamp used in a DLP TV has a limited lifespan. For the best screen quality it needs to be replaced periodically. After replacing the lamp, the screen quality will be bright and clear as new. When do I need to replace it? It should be replaced when the screen becomes darker, less clear or when all three LEDs on the front (Timer, Lamp, & Temp.) are flashing. Check before lamp replacement 1. The
ملخص المحتوى في الصفحة رقم 15
BP68-00429A-00Eng 11/10/04 3:18 PM Page 15 Front Panel LED Indicators The three lights on the front panel indicate the status of your TV. : Light is On : Light is Blinking : Light is Off TIMER LAMP STAND BY/TEMP Indication Standby state. The picture will automatically appear in about 15 seconds. Auto Timer ON/OFF has been set and the set will automatically be turned on in about 25 seconds. A cooling fan inside the set is not operating normally. Lamp cover on rear of the set is not properl
ملخص المحتوى في الصفحة رقم 16
BP68-00429A-00Eng 11/10/04 3:18 PM Page 16 Memo 16 Downloaded from www.Manualslib.com manuals search engine
