Atdec TH-3270-UFM دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

TH-3270-UFM
Step 7. Mounting the Display onto the Articulated Arm ( required)
 Installation Instructions
TM
Lower the Display so that the Hook If necessary, adjust the horizontal Fix the Display in position using the
Plate locates with the Mounting angle of the Mounting Rail so that Mount Head Screw and Nylon
Head. the Display is level. Washer supplied (see hardware).
Flat Screen Wall Mount | Full Motion
Hook
5mm
Plate
+/-5°
Component Checklist
Allen Key
Adjustment
TIGHTEN
Mounting R

ملخص المحتوى في الصفحة رقم 2

Step 3. Attaching the Articulated Arm to the Wall Step 5. Landscape or Portrait Setup NOTE: The Mounting Rail is factory set to mount the Display in a landscape position. Remove the Telehook Arm from Wall Plate Cover If you wish to mount the Display in a portrait position, please carry out the following instructions (if not, skip to Step 6). the packaging and open fully. Remove the: Loosen, but do not remove the Remove the lower Cable Clip. � Cover Plate. Centre Pin using the 6mm Allen Key Then