ملخص المحتوى في الصفحة رقم 1
MHD01695_E.book 1 ページ ２００５年２月１日 火曜日 午後７時７分
USER'S MANUAL
(Specification and Part Names)
WIDE PLASMA DISPLAY
P42VHA40W/P42HHA40W/P50XHA40W/P55XHA40W/
P63XHA40W
P42VHA40U/P42HHA40U/P50XHA40U/P55XHA40U/
P63XHA40U
P42VHA40A/P42HHA40A/P50XHA40A/P55XHA40A/
P63XHA40A
P42VHA40R/P63XHA40R
Contents
Page
Before Use
• CHECKING ACCESSORIES.................................................................................... E-2
• INSTALLATION ..................................................................
ملخص المحتوى في الصفحة رقم 2
MHD01695_E.book 2 ページ ２００５年２月１日 火曜日 午後７時７分 CHECKING ACCESSORIES Two big One power cable Two small Three user's manuals One remote control One remote control ferrite cores ferrite cores (for the W/A/R models) (for the U model) Manual Manual Manual No.:ZCAT1518-0730 No.:SFT-72SN Mfr.:TDK Mfr.:TKK Two AA batteries One residential warranty (for the A model) CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT Carefully check the terminals for position and type before making any connections. Loose c
ملخص المحتوى في الصفحة رقم 3
MHD01695_E.book 3 ページ ２００５年２月１日 火曜日 午後７時７分 INSTALLATION To prevent the display's internal components from overheating, make sure that the display is installed in a well-ventilated location. Be sure to use the optional stand, wall-mounting unit or the other unit when installing the display. Also, be also sure that your dealer performs the installation. See the appropriate instruction manual for more information on the installation hardware you select. To prevent an accident and ensure safety i
ملخص المحتوى في الصفحة رقم 4
MHD01695_E.book 4 ページ ２００５年２月１日 火曜日 午後７時７分 PART NAMES AND FUNCTIONS DISPLAY SECTION – FRONT Power indicator lamp (Right section) This lamp shows the state of the power supply. Lit (red): Stand-by state Lit (green): Power ON state Flashing (red or green): Malfunction (Flashes differently depending on the type of malfunction.) Remote control signal receiver Receives signals from the remote control. Input mode selector button [MODE] Input mode selector button [MODE] Switches betw
ملخص المحتوى في الصفحة رقم 5
MHD01695_E.book 5 ページ ２００５年２月１日 火曜日 午後７時７分 DISPLAY SECTION – BACK AND BOTTOM PART Back Bottom / I power switch If this button is pressed when the power indicator lamp is off, the indicator lamp will light. The power can be turned on and the standby mode selected by using the remote control or the control panel of the display. If this button is pressed when the power indicator lamp is lit, the indicator lamp will go out. *Power is still supplied to parts of the display even if the indicator
ملخص المحتوى في الصفحة رقم 6
MHD01695_E.book 6 ページ ２００５年２月１日 火曜日 午後７時７分 PART NAMES AND FUNCTIONS (Continued) RGB2 input terminal (RGB2 INPUT/mD-sub) for the W/U/A models / RGB1 input terminal (RGB1 INPUT/mD-sub) for the R model Connect this terminal to the PC’s display (analog RGB) output terminal or decoder (digital broadcast tuner, etc.) output terminal. Component video input terminal (VIDEO3 INPUT) Component video input terminal (VIDEO4 INPUT) Connect this terminal to the component video output (color differenc
ملخص المحتوى في الصفحة رقم 7
MHD01695_E.book 7 ページ ２００５年２月１日 火曜日 午後７時７分 DESCRIPTION OF INPUT TERMINALS DVI-D terminal (RGB1 INPUT/DVI-D) Pin No. Signal Pin No. Signal Pin No. Signal for the W/U/A models 1 T.M.D.S. Data2– 9 T.M.D.S. Data1– 17 T.M.D.S. Data0– 2 T.M.D.S. Data2+ 10 T.M.D.S. Data1+ 18 T.M.D.S. Data0+ 3 T.M.D.S. Data2 11 T.M.D.S. Data1 19 T.M.D.S. Data0 Shield Shield Shield 4— 12 — 20 — 5— 13 — 21 — 6 DDC Clock 14 +5V Power 22 T.M.D.S. Clock Shield 7 DDC Data 15 Ground (for +5V) 23 T.M.D.S. Clock+ 8 — 16 Hot
ملخص المحتوى في الصفحة رقم 8
MHD01695_E.book 8 ページ ２００５年２月１日 火曜日 午後７時７分 PART NAMES AND FUNCTIONS (Continued) HDMI input terminal (VIDEO5 INPUT/HDMI) Pin No. Input signal Pin No. Input signal for the U model 1 T.M.D.S. Data2+ 11 T.M.D.S. Clock Shield 2 T.M.D.S. Data2 Shield 12 T.M.D.S. Clock– 3 T.M.D.S. Data2– 13 CEC 4 T.M.D.S. Data1+ 14 Reserve 5 T.M.D.S. Data1 Shield 15 DDC Clock 6 T.M.D.S. Data1– 16 DDC Data 7 T.M.D.S. Data0+ 17 Ground (for +5V) 8 T.M.D.S. Data0 Shield 18 +5V Power 9 T.M.D.S. Data0– 19 Hot Plug Detect
ملخص المحتوى في الصفحة رقم 9
MHD01695_E.book 9 ページ ２００５年２月１日 火曜日 午後７時７分 OPTIONS Wall-mounting Bracket 0° to 15° mounting angle P-WB4201 (for 42” model/50” model) P-WB6300 (for 55” model/63” model) Ceiling unit 0° to 15° mounting angle P-CT4200 (for 42” model/50” model) P-CT6300 (for 55” model/63” model) Desktop Stand unit P-TT4202 (for 42” model/50” model/55” model) P-TT6300 (for 63” model) Speaker P-SP1000 (for attaching to the display) for (1 set of 2 speakers) 42” model/50” model P-SP5010 (for attaching to the displa
ملخص المحتوى في الصفحة رقم 10
MHD01695_E.book 10 ページ ２００５年２月１日 火曜日 午後７時７分 MAIN SUPPORTED SIGNALS This display can store the latest four types of signals for RGB adjustment value. The fifth input signal will replace the adjustment value of the first input signal. To do this, select a desired signal and follow the instructions in “Adjusting Screen Position and Size” on the User’s manual (2/2) to adjust the parameters. When you finish, the settings will be automatically stored. Thus, when the display receives that signal,
ملخص المحتوى في الصفحة رقم 11
MHD01695_E.book 11 ページ ２００５年２月１日 火曜日 午後７時７分 In the Comp.video and Video/S-video, the display has been factory-set as follows for different input signals: Main corresponding signals (Comp.video mode) Main corresponding signals (Video, S-video mode) Horizontal Vertical Horizontal Vertical Signal HDMI Signal frequency (kHz) frequency (Hz) frequency (kHz) frequency (Hz) 15.73 59.94 SDTV 480i 15.73 59.94 NTSC 15.63 50.00 SDTV 576i 15.63 50.00 PAL 31.47 59.94 SDTV 480p 15.63 50.00 SECAM 31
ملخص المحتوى في الصفحة رقم 12
MHD01695_E.book 12 ページ ２００５年２月１日 火曜日 午後７時７分 SPECIFICATION WIDE PLASMA DISPLAY Model P42VHA40W/A P42HHA40W/A P50XHA40W/A P55XHA40W/A P63XHA40W/A Screen size 42" wide screen: 42" wide screen: 50" wide screen: 55" wide screen: 63" wide screen: 92.1 cm (W) x 51.8 92.2 cm (W) x 52.2 110.6 cm (W) x 62.2 122.9 cm (W) x 69.1 139.3 cm (W) x 78.3 cm (H) cm (H) cm (H) cm (H) cm (H) (105.7 cm diagonal) (106.0 cm diagonal) (126.9 cm diagonal) (140.0 cm diagonal) (159.8 cm diagonal) 36.3 inch (W) x 20.4 3
ملخص المحتوى في الصفحة رقم 13
MHD01695_E.book 13 ページ ２００５年２月１日 火曜日 午後７時７分 WIDE PLASMA DISPLAY Model P42VHA40U P42HHA40U P50XHA40U P55XHA40U P63XHA40U Screen size 42" wide screen: 42" wide screen: 50" wide screen: 55" wide screen: 63" wide screen: 92.1 cm (W) x 51.8 92.2 cm (W) x 52.2 110.6 cm (W) x 62.2 122.9 cm (W) x 69.1 139.3 cm (W) x 78.3 cm (H) cm (H) cm (H) cm (H) cm (H) (105.7 cm diagonal) (106.0 cm diagonal) (126.9 cm diagonal) (140.0 cm diagonal) (159.8 cm diagonal) 36.3 inch (W) x 20.4 36.3 inch (W) x 20.6 43.5
ملخص المحتوى في الصفحة رقم 14
MHD01695_E.book 14 ページ ２００５年２月１日 火曜日 午後７時７分 SPECIFICATION (Continued) WIDE PLASMA DISPLAY Model P42VHA40R P63XHA40R Screen size 42" wide screen: 63" wide screen: 92.1 cm (W) x 51.8 cm (H) (105.7 cm diagonal) 139.3 cm (W) x 78.3 cm (H) (159.8 cm diagonal) 36.3 inch (W) x 20.4 inch (H) (41.6 inch diagonal) 54.8 inch (W) x 30.8 inch (H) (62.9 inch diagonal) Aspect ratio 16:9 (wide) Number of pixels 852 (H) x 480 (V) 1366 (H) x 768 (V) Weight 31.5 kg / 69 lbs 72 kg / 159 lbs Outer dimensio
ملخص المحتوى في الصفحة رقم 15
MHD01661-01_E.book 1 ページ ２００４年１１月１６日 火曜日 午後４時３３分 USER'S MANUAL (Precautions and Adjustment Methods) WIDE PLASMA DISPLAY Contents Page Page Before Use • OTHER ADJUSTMENTS ...........................................E-29 • INFORMATION ............................................................E-2 • INITIALIZATION OF USER ADJUSTMENT VALUE ..E-35 Usage Others • USING THE REMOTE CONTROL...............................E-3 • CLEANING AND MAINTENANCE .............................E-36 • CONNECTING THE D
ملخص المحتوى في الصفحة رقم 16
MHD01661-01_E.book 2 ページ ２００４年１１月１６日 火曜日 午後４時３３分 INFORMATION • Receptacle Make sure that the power cable’s grounding wire is grounded. The display comes with a 3-prong power plug; one prong is connected to the grounding wire. If you have only a 2-hole receptacle, you will need to have it replaced. Contact your dealer for more information. • Have the display inspected and cleaned by your dealer at regular intervals. • Pictures may become “burnt” into the screen phosphors if the screen is lef
ملخص المحتوى في الصفحة رقم 17
MHD01661-01_E.book 3 ページ ２００４年１１月１６日 火曜日 午後４時３３分 USING THE REMOTE CONTROL REMOTE CONTROL (for the W/R models) For details, see page . button E-12 Switches between Power On and Standby. (MUTE button) E-13 Temporarily mutes the audio. To return the audio to normal, press this button once again, or press the does the work also. (DISPLAY button) E-16 Press this button to display the input mode, and screen size status. The status is displayed for about five seconds. (PICTURE MODE b
ملخص المحتوى في الصفحة رقم 18
MHD01661-01_E.book 4 ページ ２００４年１１月１６日 火曜日 午後４時３３分 USING THE REMOTE CONTROL (Continued) REMOTE CONTROL (for the U model) For details, see page . button E-12 Switches between Power On and Standby. (MUTE button) E-13 Temporarily mutes the audio. To return the audio to normal, press this button once again, or press the does the work also. (DISPLAY button) E-16 Press this button to display the input mode, and screen size status. The status is displayed for about five seconds. (PICTU
ملخص المحتوى في الصفحة رقم 19
MHD01661-01_E.book 5 ページ ２００４年１１月１６日 火曜日 午後４時３３分 PUTTING BATTERIES IN THE REMOTE CONTROL (1) To remove the cover, slide it outwards (2) Place two AA batteries in the remote (3) Close the cover until it snaps into place. while pressing it down. control. Make sure that the batteries are properly oriented. PRECAUTIONS To prevent malfunction, be sure not to apply any form of severe shock to the remote control. To prevent malfunction or deformation, be sure not to allow the remote control to beco
ملخص المحتوى في الصفحة رقم 20
MHD01661-01_E.book 6 ページ ２００４年１１月１６日 火曜日 午後４時３３分 USING THE REMOTE CONTROL (Continued) EFFECTIVE RANGE FOR THE REMOTE CONTROL Point the remote control at the display’s signal receiver when using it. Make sure that there are no obstacles between the remote control and the display’s signal receiver. Upper 20° 20° Lower Left Right 30° 30° 5 m (Front) Note The remote control may not function properly if you use a high-frequency fluorescent lamp. If you experience problems, move the lamp or use the
