ملخص المحتوى في الصفحة رقم 1
PLASMA TV
OWNER`S MANUAL
MODELS: P42A9-AK
Please READ this manual carefully before
operating your TV, and retain it for future
reference.
ملخص المحتوى في الصفحة رقم 2
Congratulations on your purchase, and welcome to the "" family ! Dear Haier product owner: Thank you for your confidence in Haier. You`ve selected one of the best-built, best-backed products available today. We`ll do everything in our power to keep you happy with your purchase for many years to come. As a member of the Haier "" family, you`re entitled to protection by one of the most comprehensive warranties and outstanding service networks in the industry. Thanks for investing in a Haier p
ملخص المحتوى في الصفحة رقم 3
Important Safety Instructions Important safeguards for you and your new product Your product has been manufactured and tested with your safety in mind. However, improper use can result in electrical shock or fire hazards. To avoid defeating the safeguards that have been built into your new product, please read and observe the following safety points when installing and using your new product, and save them for future reference. 1. Retain these Instructions ---The safety and operating instruc
ملخص المحتوى في الصفحة رقم 4
Important Safety Instructions a. When the power supply cord or plug is damaged or frayed. b. If liquid has been spilled, or objects have been fallen into the unit. c. If the unit has been exposed to rain or water. d. If the unit does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as improper adjustment of other controls may result in damage and will often require
ملخص المحتوى في الصفحة رقم 5
Table of Contents Warning ............................................. 1 Sound menu.............................................. 27 Important Safety Instructions................ 2 To choose sound modes .......................... 27 Accessories .....................................4 Balance................................................. 27 buttons and interface location..............5 Setting Five Equalizer sound ................... 28 Front control panel.......................
ملخص المحتوى في الصفحة رقم 6
Buttons and interface location -This is a simplified representation of front panel. -Here shown may be somewhat different from your TV. Front control panel - CH + - VOL + TV/AV MENU POWER Buttons and functions 1 Channel number increase and decrease. 2 Volume decrease: for lowering the volume or adjusting the menu. Volume increase: for enhancing the volume or adjusting the menu. 3 TV/AV button 4 Menu button 5 Power and indicator: for turning on or off the power supply. 6 Remote receiv
ملخص المحتوى في الصفحة رقم 7
Buttons and interface location Rear Control panel USB Socket VIDEO Input Connects the video signal from a video device. VIDEO AUDIO Input L connect to hear stereo sound from an AUDIO external device. R Switch power on/off Power Cord Socket This TV operates on AC power. POWER The voltage is indicated on the specifications page. Never attempt to operate the TV on DC power VGA IN COMPONENT IN DVI IN L R S C ART2 S C A R T 1 AUDIO OUT VGA AUDIO Pr/Cr Pb/Cb Y L
ملخص المحتوى في الصفحة رقم 8
Remote controller Inserting Batteries 1.Slide open the 2.Load two AA alkaline 3.Replace the cover of the cover of the battery batteries in the compartment. battery compartment. compartment on the paying attention to the polarity back of the remote diagram in the battery controller. compartment.(plus and minus poles to respective mark) Precautions Make sure that two AA alkaline batteries As strong light may interfere the are loaded. The batteries must be of the signals, change
ملخص المحتوى في الصفحة رقم 9
Keys of remote controller - The remote controller cannot be operated unless the batteries are properly loaded. - When using the remote control, aim it at the remote control sensor on the TV. Function introduction STILL I/II (NICAM) Picture static SLEEP PIP Displaying sleep time, Power Off/Standby adjustable any other programmed MUTE STILL MUTE equipment off. Switches the sound on or off SLEEP PIP DISPLAY SCAN SCAN Program scan button DISPLAY Display ON/OFF ABC@ DEF Digits GHI$ MNO JKL% Program
ملخص المحتوى في الصفحة رقم 10
Remote controller Effective range above 20 20 below 45 45 right left front 8m MUTE STILL SCAN SLEEP PIP DISPLAY ABC@ DEF GHI$ JKL% MNO POR& STUV WXYZ TV/AV *#() SWAP P.STD S.STD CH+ VOL- MENU VOL+ CH- H.LOCK CH.LIST TIMER ZOOM EXIT Ensure the remote controller is pointed toward the remote controller window on the display. No obstacles should be placed between the remote controller and the remote controller window. The effective receiving scope for the signal is 8 meters to the O front
ملخص المحتوى في الصفحة رقم 11
External Equipment Connections Antenna Connection Generally speaking, to enjoy a clearer picture, we recommend that you use a CATV system or an outdoor antenna .In different places, the suitable antenna type and position are different. Mixer outdoor additional antenna purchase Antenna input 75 standard coaxial type ANT IN 75 coaxial cable 300 twin-lead cable Plug Antenna adapter (additional purchase) Note * It is recommended that you'd better use 75 coaxial cable to re
ملخص المحتوى في الصفحة رقم 12
External Equipment Connection NOTE: All cables shown are not included with the TV. Choose Your Connection There are several ways to connect your television, depending on the components you want to connect and the quality of the signal you want to achieve. The following are examples of some ways to connect your TV. Choose the connection which is best for you. VCR connection - To avoid picture noise (interference), leave an adequate distance between the VCR And TV. 1. Connect the SCART cab
ملخص المحتوى في الصفحة رقم 13
External Equipment Connections DVD connection How to connect 1. Connect the DVD video outputs (Y, Pb/Cb, Pr/Cr) to the YUV IN jacks on the TV and connect the DVD audio outputs to the AUDIO IN jacks on the TV, as shown in the COMPONENT IN figure. 2. If your DVD only has an SCART output SCART2 SCART1 ANT IN Pr/Cr Pb/Cb Y L-AUDIO-R jack, connect this to the SCART input on the TV. as shown in the figure. NOTE: If your DVD player does not have component video output, use S-V
ملخص المحتوى في الصفحة رقم 14
External Equipment Connections PC connection How to connect or DVI source. 1. To get the best picture quality, adjust the PC 4. Check the image on your TV. There may be noise associated with the resolution, graphics card to (>1024 x768),60Hz. vertical pattern, contrast or brightness in 2. Use the TV`s VGA IN port for video PC mode. If noise is present, change the connections, depending on your PC connector. PC mode to another resolution, change If the graphic card on the PC does not
ملخص المحتوى في الصفحة رقم 15
External Equipment Connections - The following chart illustrates only, please with your kind is purchased. Loudhailer Connect Loudhailer 1. Face the PDP screen upside down on a clean blanket or a bracket and pay attention not to indent the casing. Lay the two speaker aside of the PDP. 2. Lay annectent bracket on the speaker and hind rind, Fix the screws to the speaker and hind rind. 3. Connect the speaker cable to the speaker terminal of PDP TV and the Annectent speaker terminal, and
ملخص المحتوى في الصفحة رقم 16
External Equipment Connections Connecting Headphones You can connect a set of headphones to your set if you wish to watch a TV programme without disturbing the other people in the room. Plug a set of headphones into the 3.5mm mini-jack socket on the rear panel of the set. Note Prolonged use of headphones at a high volume SWITCH may damage your hearing. AC-INPUT ANT IN You will not receive sound from the speakers when you connect headphones to the system. Power source TO USE AC POWER SOURCE
ملخص المحتوى في الصفحة رقم 17
Set up your TV -There are several options you might need to set up in order for your TV to work properly. Read the instructions that follow. -In the manual, the OSD(on screen display) may be different from your TV`s, because it is just an example to help you with the TV operation. Switching ON/OFF the TV set 1 Please press down the power switch to switch on AC power supply and the power indicator will light . 2 If the indicator is lighting in red, press button on the remote controlle
ملخص المحتوى في الصفحة رقم 18
Select input modes Choose the input source If you hope to enjoy the picture from the external input source, before to select the source, you need to connect the devices, otherwise, when you select the source, the none or no signal will appears on the screen. MUTE STILL Press TV/AV button on the remote Source SLEEP PIP DISPLAY SCAN control, the menu appears on the TV ABC@ DEF SCART1 screen. Then press CH+/- to select SCART2 GHI$ JKL% MNO the TV item, and press VOL+ to AV POR& STUV WXYZ HD
ملخص المحتوى في الصفحة رقم 19
Tuning menu This TV set has three methods to set channels, which are respectively full automatic, manual search fine tune. In this section, how to use the remote control to set channel is explained. You can also use buttons on the TV set to set channel. Full automatic search mode Automatic search 1 Press MENU button and then CH+/- button, the icon to TUNING menu. MUTE STILL 2 Press the VOL+/- buttons to enter submenu, and press SCAN SLEEP PIP DISPLAY CH+/- button to select "country"
ملخص المحتوى في الصفحة رقم 20
Tuning menu Program Table 1 Press MENU button and then CH+/- button, the icon to TUNING menu. 2 Press VOL+/- button to MENU enter submenu, and press MUTE STILL CH+/- button to select PICTURE Tuning Program AUDIO "Program Table", press Country England SCAN SLEEP PIP DISPLAY ADJUST VOL+ button to enter. Auto Search TUNING Program Table Or press CH.LIST button PIP Source HDMI/DVI ABC@ DEF FUNCTION on remote controller. PIP Position Center TIMER GHI$ JKL% MNO 3 Press CH+/- button to POR& S
