Marshall electronic V-R151P-4A دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Marshall Electronics
11
Standard Accessories
1910 East Maple Ave.
Accessories Supplied with the V-R151P-4A El Segundo, CA 90245
Tel.: 800-800-6608 • 310-333-0606
• Users manual
Fax: 310-333-0688
• “Brick” type 12vdc power supply with 4 Pin Female XLR connector
www.LCDRacks.com
• “V” Mount battery adapter
• VESA 75 Mount Email: sales@lcdracks.com
12
Optional Accessories
Desk Stand - VP-LCD171H-ST-01 - Use for Desk Top
V V-R151P-4A -R151P-4A Users Guide Users Guide
1
Product Overvie

ملخص المحتوى في الصفحة رقم 2

1 Product Overview The V-R151P-4A is a rack-mounted monitor with a 15”, 4:3 aspect ratio active matrix LCD/TFT module. Mounting can also be achieved via a VESA 75 reinforced mount point on the rear of the unit or with the included rack ears. The display will produce a high-resolution 1280W x 1024H SXGA image from a computer with Analog RGBHV outputs plus DVI-Digital or display scaled video images. Component, Composite Video or Y/C (S-video) images are displayed via a proprietary internal sca

ملخص المحتوى في الصفحة رقم 3

5 Connectors 12 VDC from power supply 4 Pin Male XLR Pin 4 - Pos Pin 1- Neg VESA 75mm VGA/XGA Connector PIN# SIGNAL PIN# SIGNAL Attach Points 1 RED 9 NC 2 GREEN 10 NC S-Video IN 3 BLUE 11 NC 4 Pin Din (Female) 4 NC 12 NC Pin1 - GND 5 GND 13 HSYNC 6 RED SHIELD 14 VSYNC Pin2 - GND Tally IN HD-15 Female 7 GREEN SHIELD 15 NC Pin3 – Y in 8 BLUE SHIELD Pin1- Green Pin8- Pin4 – C in Pin2- Red Pin 9- Pin3-Amber Pin10- Pin4 Gnd - Pin11- Pin5- Pin12- Pin6- Pin13- 4 Composite Pin7-

ملخص المحتوى في الصفحة رقم 4

2. Function Menu (Use UP/DOWN/LEFT/RIGHT buttons to select function) YPrPb S-Video Video PC DVI Auto Confi gure DPMS Reset OSD Time Out Sleep Timer Language AUTO Confi gure – Used for PC signals to auto fi t image to screen. DPMS – When selected to ON, the Digital Power Management System will place the monitor into standby when there is no input signal for 12 seconds and will automatically turn on the monitor when a signal is applied to the las