ملخص المحتوى في الصفحة رقم 1
ملخص المحتوى في الصفحة رقم 2
LASER SAFETY This unit employs a laser. Due to possible eye injury, only a qualified service person should remove the cover or attempt to service this device. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. LASER Type Semiconductor laser GaAIAs Wave length 650 nm (DVD) 780 nm (VCD/CD) Output Power 7 mW (DVD) 10 mW (VCD/CD) Beam divergence 60 degree CLASS 1 LASER PRODUCT CAUTION – Visible and invisible laser
ملخص المحتوى في الصفحة رقم 3
Introduction Thank you for purchasing this television set. This handbook has been designed to help you install and operate your TV set. We would strongly recommend that you read it thoroughly. We hope our technology meets entirely with your satisfaction. Table of Contents Installation Installing your television set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 The keys on the TV set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ملخص المحتوى في الصفحة رقم 4
Installing your television set & ‘ Positioning the television set Remote control 5 cm ` 5 cm 5 cm Ø ı TV VCR 1 DVD 4 Place your TV on a solid, stable surface, leaving Insert the two R6-type batteries (supplied) a space of at least 5 cm around the appliance. making sure that they are the right way round. To avoid accidents, do not put anything on the Check that the mode selector is set to TV. The batteries supplied with this appliance do not set such as a cloth or cover, a container full of conta
ملخص المحتوى في الصفحة رقم 5
The remote control keys List of programmes To display/clear the list of programmes. Use the keys IJ to select a programme and the key L to display it. The symbol + is displayed alongside Contrast + all programmes which are locked (p.10) To activate / de-activate the or ? if they are not locked. automatic contrast adjustment system (the dark areas are made Sleeptimer darker whilst maintaining the detail). To select the length of time before the set automatically Standby switches to standby (from
ملخص المحتوى في الصفحة رقم 6
Quick installation The first time you switch on the television, a The operation takes several minutes. menu appears on the screen and the tuning A display shows the search status and the starts automatically. number of programmes found.When it has finished the menu disappears. SELECT LANGUAGE To exit or interrupt the search, press the H key. LANGUAGE COUNTRY If no programmes are found, refer to the chapter • ENGLISH AUSTRIA entitled Tips on p. 24. SEARCHING DANSK BELGIUM PLEASE WAIT NEDERLANDS S
ملخص المحتوى في الصفحة رقم 7
Using other menus MENU MENU MENU PICTURE • BRIGHTNESS • COLOUR • CONTRAST --I------ 39 • SHARPNESS • STORE Choosing a language and country & Press the H key to display the main menu. “ Press L to go into the LANGUAGE menu. é Select INSTALL (J), then press L. ‘ Select your language with the IJ keys. The INSTALL menu appears. The menus will appear in the chosen language. The LANGUAGE option is activated. ( Press K to exit the LANGUAGE menu. § Select the option COUNTRY and press L. è Select your co
ملخص المحتوى في الصفحة رقم 8
Manual tuning This menu allows you to store the ( Select SEARCH and press L. programmes one by one. The search begins.As soon as a programme is & Press H. found, the search will stop. If you know the é Select INSTALL (J), then press L. frequency of the programme required, enter The INSTALL menu appears. its number directly using the 09 keys and “ Select MANUAL STORE (J) then press L. go to step è. The menu appears : If no programme is found, refer to the Tips chapter on page 24). INSTALL • PICTU
ملخص المحتوى في الصفحة رقم 9
w Check that the mode selector on the side of the remote control is set to TV. Adjusting the picture Description of the settings: & Press H then L. • BRIGHTNESS: alters the brightness of the The PICTURE menu appears : image. PICTURE • COLOUR: alters the colour intensity. • PICTURE • SOUND • BRIGHTNESS --I------ 39 • FEATURES • CONTRAST: alters the variation between • INSTALL • COLOUR light and dark tones. • CONTRAST • SHARPNESS • SHARPNESS: alters the crispness of the image. • STORE • STORE: sto
ملخص المحتوى في الصفحة رقم 10
w Check that the mode selector on the side of the remote control is set to TV. Adjusting the sound Description of the settings: & Press H, select the SOUND option (J) and • LEVEL: to balance the sound between the press L.The SOUND menu appears : different speakers (see below). SOUND • EQUALIZER: to adjust the sound tone (from • PICTURE • LEVEL 120 HZ • SOUND bass: 120 Hz to treble: 10 kHz). • FEATURES • EQUALIZER 500 HZ • INSTALL • SURROUND MODE: to select the different • SURROUND MODE 1500 HZ 5
ملخص المحتوى في الصفحة رقم 11
w Check that the mode selector on the side of the remote control is set to TV. Surround modes This menu allows you to select the different “ Use the IJ keys to select the relevant surround modes. surround mode : STEREO, DOLBY 3 STEREO, & Press H, select SOUND (J) and press L. 3D SURROUND, HALL SURROUND and The SOUND menu appears. DOLBY PROLOGIC. For each setting, the é Select SURROUND MODE and press L.The active loudspeakers are displayed on screen. menu appears : Remark : the DOLBY PRO LOGIC an
ملخص المحتوى في الصفحة رقم 12
w Check that the mode selector on the side of the remote control is set to TV. Timer function This menu allows you to use your TV as an not have teletext, the update will not take place. alarm clock. ( START TIME: enter the start time. & Press H. § STOP TIME: enter the stop time. é Select FEATURES (J) and press L twice. è PROG; NO;: enter the number of the The TIMER menu appears : programme required. ! ACTIVATE: you can set the alarm to be FEATURES activated: • PICTURE TIMER • SOUND • FEATURES •
ملخص المحتوى في الصفحة رقم 13
Teletext Teletext is an information system, broadcast by certain channels, which can be read like a newspaper. It also provides subtitles for people with hearing difficulties or those who are unfamiliar with the language in which a particular programme is being broadcast (cable networks, satellite channels, etc.). Switch teletext on/off To call up or exit from teletext.When first pressed, the main index page appears with a list of the items available. Each page has a corresponding 3-figure numb
ملخص المحتوى في الصفحة رقم 14
w Check that the mode selector on the side of the remote control is set to TV. 16:9 Formats The pictures you receive may be transmitted in 16:9 format (wide screen) or 4:3 format (conventional screen). 4:3 pictures sometimes have a black band at the top and bottom of the screen (letterbox format).This function allows you to optimise the picture display on screen. Automatic switching This TV set is also equipped with automatic switching which will select the correct-screen format, provided the sp
ملخص المحتوى في الصفحة رقم 15
Selecting the correct mode Different modes can be selected to suit different picture formats, use the following diagrams as a guide to which mode to use. & 4:3 Picture There are 5 possible modes for this type of picture ZOOM 14 : 9 MENU ZOOM 16 : 9 4 : 3 MENU SUBTITLE ZOOM Subtitles SUPERWIDE Progressive zoom é 4:3 Picture Letterbox MENU 4 : 3 ZOOM 16 : 9 x2 “ 16:9 Picture MENU WIDE SCREEN 4 : 3 x1 13
ملخص المحتوى في الصفحة رقم 16
Using the built-in DVD player The built-in DVD player allows you to play DVD video disks as well as video and audio CDs (including finalised CD-Rs and CD-RWs).The disks can be recognised by their logo on the packaging. Note: Generally, DVD films are not placed on the market at the same time in the various regions of the world.Accordingly, DVD players are provided with geographical zone codes. If you insert a disk which has a regional code that is different from that of your reader, you will see
ملخص المحتوى في الصفحة رقم 17
Playing a DVD or video CD w To access the DVD functions you must first switch the mode selector located on the side of the remote control to the DVD position. . ` Play Ø ı |Œ Once the disk has been inserted and the drawer closed, play begins TV automatically. Certain disks will ask you to select a heading from a menu. VCR 1 2 3 DVD Use the buttons 09 or IJ KL then press P (button C). 4 5 6 Stopping play 7 8 9 Press the Ê button to stop play.The default screen appears and displays SMART SMART - ª
ملخص المحتوى في الصفحة رقم 18
Playing an audio CD w First you must switch the mode selector located on the side of the remote control to the DVD position. Play . ` Once the disk has been inserted and the drawer has closed, play Ø ı |Œ TV begins automatically.A special menu appears on the screen, indicating VCR 1 2 3 the number of tracks, the total length of the disk, the current track DVD 4 5 6 and time. Changing tracks 7 8 9 SMART SMART Use the @ P # keys on the remote control to change tracks or - ª 0 the 09 keys to select
ملخص المحتوى في الصفحة رقم 19
OSD menu This menu allows you to access all the special Description of symbols: functions of the DVD player. A Preferential settings Press the Q key (key R).A menu bar C Subtitling language appears at the top of the screen with symbols B Audio language for each setting. Use the KL IJ keys to H Sound select and make settings. I Frame by frame J Slow motion K Fast play D Camera angle E Zoom T Titles C Chapters / sequences L Direct access by time G Favourite tracks Symbols shown in grey indicate th
ملخص المحتوى في الصفحة رقم 20
Preferential settings • Night mode; optimises the sound dynamics Press Q. On the menu bar, select A and for low-volume listening. press J to display the preferential settings menu: • Karaoke vocal; Only activate this function for playing special karaoke DVDs (the karaoke voices on the disk are then mixed TV Shape 16/9 Æ into the normal stereo sound). Black level shift On • PCM Output; allows you to choose the Video shift ____.____ frequency selection of the PCM digital output. N Language prefere
