ملخص المحتوى في الصفحة رقم 1
BDL6531E
www.philips.com/welcome
EN User manual
Cleaning and troubleshooting
ملخص المحتوى في الصفحة رقم 2
User Manual BDL6531E SAFETY AND TROUBLESHOOTING INFORMATION Safety precautions and maintenance WARNING: Use of controls, adjustments or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards and/or mechanical hazards. Read and follow these instructions when connecting and using your display: Operation: • Keep the display out of direct sunlight and away from stoves or any other heat sources. • Remove any object that could fall into the ve
ملخص المحتوى في الصفحة رقم 3
User Manual BDL6531E Service: • The casing cover should be opened only by qualified service personnel. • If there is any need for repair or integration, please contact your local service center. • Do not leave your display under direct sunlight. Consult a service technician if the display does not operate normally, or you are not sure what procedure to take when the operating instructions given in this manual have been followed. Read and follow these instructions when connecting and using your
ملخص المحتوى في الصفحة رقم 4
User Manual BDL6531E REGULATORY INFORMATION CE DECLARATION OF CONFORMITY MMD declares under our responsibility that the product is in conformity with the following standards • EN60950-1:2006+A11:2009 (Safety requirement of Information Technology Equipment) • EN55022:2006+A1:2007 (Radio Disturbance requirement of Information Technology Equipment) • EN55024:1998+A1:2001+A2:2003 (Immunity requirement of Information Technology Equipment) • EN61000-3-2:2006 (Limits for Harmonic Current Emission) • EN
ملخص المحتوى في الصفحة رقم 5
User Manual BDL6531E POLISH CENTER FOR TESTING AND CERTIFICATION NOTICE The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All equipment that works together (computer, display, printer and so on) should have the same power supply source. The phasing conductor of the room’s electrical installation should have a reserve short-circuit protection device in the form of a fuse with a nominal value no larger than 16 Amperes (A). To completely swi
ملخص المحتوى في الصفحة رقم 6
User Manual BDL6531E INFORMATION FOR UK ONLY WARNING - THIS APPLIANCE MUST BE EARTHED. Important: This apparatus is supplied with an approved moulded 13A plug. To change a fuse in this type of plug proceed as follows: 1. Remove fuse cover and fuse. 2. Fit new fuse which should be a BS 1362 5A,A.S.T.A. or BSI approved type. 3. Refit the fuse cover. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate 3-pin plug fitted in its place. If the mains p
ملخص المحتوى في الصفحة رقم 7
User Manual BDL6531E 中国电子信息产品污染控制表示要求 ( 中国 RoHS 法规标示要求) 产品中有毒有害物质或元素 的名称及含量 有毒有害物质或元素 六价铬 铅 部件名称 汞 镉 多溴联苯 多溴二苯醚 + (Hg) (Cd) (PBB) (PBDE) (Pb) (Cr 6 ) OOO O O O 外壳 XX O O O O 液晶面板 XO O O O O 电路板组件 附件 XO O O O O ( 遥控器，电源线，连接线 ) XO O O O O 遥控器电池 O ：表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T11363-2006 标准规定的限量要求以下。 X ：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T11363-2006 标准规定的限量要求。 环保使用期限 此标识指期限 ( 十年 ) ，电子信息产品中含有的有毒有害物质或元素在正常使用的条件下不会发生外泄或突变， 电子信息产品用户使用该电子信息产品不会对环境造成严重污染或对其人身、财产造成严重损害的期限。 《废弃电器电子产品回收处 理管理条例》提示性说明 为了更好地关爱及
ملخص المحتوى في الصفحة رقم 8
User Manual BDL6531E NORTH EUROPE (NORDIC COUNTRIES) INFORMATION Placering/Ventilation VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS. Placering/Ventilation ADVARSEL: SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT ER NEMT TILGÆNGELIGE. Paikka/Ilmankierto VAROITUS: SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI IRROTTAA PISTORASIASTA. Plassering/Ventilasjon ADVARSEL: NÅR DETTE UTSTYRET PLASSERES, MÅ
ملخص المحتوى في الصفحة رقم 9
User Manual BDL6531E TABLE OF CONTENTS 1. UNPACKING AND INSTALLATION 1.1. UNPACKING 1.2. PACKAGE CONTENTS 1.3. INSTALLATION NOTES 1.4. MOUNTING THE DISPLAY 2. PARTS AND FUNCTIONS 2.1. FRONT VIEW 2.2. REAR VIEW 2.3. INPUT/OUTPUT TERMINALS 2.4. REMOTE CONTROL 2.4.1. GENERAL FUNCTIONS 2.4.2. INSERTING THE BATTERIES IN THE REMOTE CONTROL 2.4.3. OPERATING RANGE OF THE REMOTE CONTROL 3. CONNECTIONS TO EXTERNAL EQUIPMEN
ملخص المحتوى في الصفحة رقم 10
User Manual BDL6531E 6.3. BRIGHT DOT DEFECTS 6.4. DARK DOT DEFECTS 6.5. PROXIMITY OF PIXEL DEFECTS 6.6. PIXEL DEFECT TOLERANCES 7. CLEANING AND TROUBLESHOOTING 7.1. CLEANING 7.2. TROUBLESHOOTING 8. TECHNICAL SPECIFICATIONS
ملخص المحتوى في الصفحة رقم 11
User Manual BDL6531E 1. UNPACKING AND INSTALLATION 1.1. UNPACKING • This product is packed in a carton, together with the standard accessories. • Any other optional accessories will be packed separately. • Due to the size and weight of this display it is recommended for two people to move it. • The protective glass and the glass substrate are installed on the front of the product. Since glass can be both broken and scratched easily, the product should be handled with care. Never place the
ملخص المحتوى في الصفحة رقم 12
User Manual BDL6531E 1.4. MOUNTING THE DISPLAY Wall mounting holes Notes: Warning: not for use in portrait mode. Warranty will be void if installed in any orientation other than landscape. • Metric 6 (10mm) screws (having a length 10-15mm longer than the thickness of the mounting bracket) are needed for wall mounting (not included). Tighten the screws securely (recommended torque: 470 - 635N•cm) • The mounting interface should comply with the UL1678 standard in North America. The mountin
ملخص المحتوى في الصفحة رقم 13
User Manual BDL6531E 2. PARTS AND FUNCTIONS 2.1. FRONT VIEW 1 1. Remote control sensor, ambient light sensor and power indicator • Receives command signals from the remote control. • Detects the ambient lighting conditions around the display. • Indicates the operating status of the display: - lights blue when the display is turned on - lights amber in standby mode - blinks blue when remote control signal is received - blinks amber when the display enters DPMS mode - off when the main power
ملخص المحتوى في الصفحة رقم 14
User Manual BDL6531E 2.2. REAR VIEW 1 2 3 4 5 6 7 8 Dent depth: 6mm 9 8 1. ENTER/VIDEO SOURCE button • Use this button to select the input source. • When the On Screen Display menu is active, this is also used as the SET button. 2. MENU button • Use this button to engage the On Screen Display menu. • When the On Screen Display menu is active, use this button to return to the previous menu. 3. / button • When the On Screen Display menu is active, use these as the UP/DOWN menu buttons. • Pre
ملخص المحتوى في الصفحة رقم 15
User Manual BDL6531E 2.3. INPUT/OUTPUT TERMINALS 3 10 15 1 2 4 5 6 7 8 9 11 12 13 14 16 9. VIDEO IN (DVI-D) 1. AC IN (10 A) Connects to the DVI-D output of a PC or to the HDMI Connects the supplied power cord to the wall outlet. output of an AV device (Using a DVI-HDMI cable). 2. AC OUT (5.0 A) 10. VGA OUT Connects to the AC IN socket of another BDL6531E Outputs the VGA signal from the VGA IN jack. display or external media device. 11. VGA IN 3. Main power switch Connects to the VGA output
ملخص المحتوى في الصفحة رقم 16
User Manual BDL6531E 2.4. REMOTE CONTROL 2.4.1. GENERAL FUNCTIONS POWER button Press to switch on the display from standby mode. Press again to turn it off to standby mode. SMART button To select smart picture mode from: • HIGHBRIGHT: for moving image such as Video • STANDARD: for images (factory setting) • sRGB: for text based images • CINEMA: for movies. • CUSTOM: use your own picture setting. The mode is automatically selected after you change the settings in the PICTURE menu. VIDEO S
ملخص المحتوى في الصفحة رقم 17
User Manual BDL6531E DISPLAY button To turn on/off the setting information displayed on the upper right corner of the screen. MENU button To turn the OSD menu on/off. UP button • To move the highlight bar up to adjust the selected item when OSD menu is on. • To move the sub-picture up in “PIP” mode. DOWN button • To move the highlight bar down to adjust the selected item when OSD menu is on. • To move the sub-picture down in “PIP” mode. PLUS button • To increase the adjustment with OSD menu. •
ملخص المحتوى في الصفحة رقم 18
User Manual BDL6531E 2.4.2. INSERTING THE BATTERIES IN THE REMOTE CONTROL 1. Remove the cover on the rear of the remote control. 2. Insert two AAA size 1.5V batteries ensuring that the “+” and “-” ends of the batteries are correctly aligned. 3. Replace the cover. Note: Do not mix battery types, e.g. alkaline and manganese. 2.4.3. OPERATING RANGE OF THE REMOTE CONTROL When pressing a remote control button, point the top of the remote control towards the remote control sensor. Use the rem
ملخص المحتوى في الصفحة رقم 19
User Manual BDL6531E 3. CONNECTIONS TO EXTERNAL EQUIPMENT 3.1. USING THE CABLE RETAINER 3.2. USING THE SWITCH COVER You can use the switch cover to prevent the display from being turned on or off accidentally. 3.3. CONNECTING EXTERNAL EQUIPMENT (DVD/VCR/VCD) 3.3.1. USING COMPONENT VIDEO INPUT 1. Connect the green-colored (labeled as "Y") jack of the device to the green-colored "Y" jack of the display. 2. Connect the blue-colored (labeled as "Pb") jack of the device to the blue-col
ملخص المحتوى في الصفحة رقم 20
User Manual BDL6531E 3.3.2. USING S-VIDEO INPUT 1. Connect the S-Video connector of the external device to the S-VIDEO input of the display. 2. Connect the red (R) and white (L) audio jacks of the device to the AUDIO IN (AUDIO2 or AUDIO3) jacks of the display. DVD/VCR/VCD 3.3.3. USING VIDEO INPUT 1. Connect the Video connector of the external device to the VIDEO IN input of the display. Use the supplied BNC-to- RCA adapter if necessary. 2. Connect the red (R) and white (L) audio jacks of
