ATD Tools Atd-7227 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Heavy Duty
Wheel Dolly
Operating Instructions & Parts Manual
Model Number Capacity
Atd-7227 3/4 Ton (1500 Lbs)
Atd Tools Inc. ©2005
160 Enterprise Drive, Wentzville, MO 63385
Atd7227-M0
Printed in China

ملخص المحتوى في الصفحة رقم 2

Save these instructions. For your safety, read and understand the information contained within. The owner and operator shall have an understanding of this product and safe operating procedures before attempting to use this product. Instructions and Safety information shall be conveyed in the operators native language before use of this product is authorized. Make certain that the operator thoroughly understands the inherent dangers associated with the use and misuse of the product. If any do

ملخص المحتوى في الصفحة رقم 3

BEFORE USE ! WARNING 1. Inspect before each use. Do not use if bent, broken, leaking or cracked components are noted. Ensure that • Read and understand all warnings and instructional casters, rollers and lifting arms move freely. Check material provided on and with this product before use. and tighten any loose assemblies. • Do not exceed rated capacity. 2. Verify that the product and the application are • Use only on smooth, hard, level surfaces capable compatible, if in doubt call Atd Tools Te

ملخص المحتوى في الصفحة رقم 4

HOW TO USE MAINTENANCE 1. Set emergency brake, chock tires of diagonally Important: Use only a good grade hydraulic jack oil. opposed wheel(s) in both directions AND take every Avoid mixing different types of fluid and NEVER use precaution necessary to ensure set up is stable and brake fluid, turbine oil, transmission fluid, motor oil or prevent inadvertent vehicle movement. glycerin. Improper fluid can cause premature failure of 2. When tire & wheel assembly are ready to remove, the jack and th

ملخص المحتوى في الصفحة رقم 5

TROUBLESHOOTING Symptom Possible Causes Corrective Action • Release valve not tightly closed • Ensure release valve tightly closed Hydraulic unit will not lift load • Overload condition • Remedy overload condition • Release valve not tightly closed • Ensure release valve tightly closed Hydraulic unit bleeds off after • Overload condition • Remedy overload condition lift • Hydraulic unit malfunction • Contact Atd Tools Tech. Service Hydraulic unit will not lower • Reservoir overfilled • Drain

ملخص المحتوى في الصفحة رقم 6

REPLACEMENT PARTS Available Parts: Please refer to the Parts drawing when ordering parts. Not all components of the dolly are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence. When ordering parts, give Model number, serial number and description below. Call or write for current pricing: Atd Tools Inc. 160 Enterprise Drive, Wentzville, MO 63385 Tel:(636)272-9050 Fax:(636)272-9044 Model Atd-7227 Ref# Part # Description Qty. 1

ملخص المحتوى في الصفحة رقم 7

Notes Atd Tools Inc. 160 Enterprise Drive, Wentzville, MO 63385 Tel: (636)272-9050 Fax: (636)272-9044 www.atdtools.com

ملخص المحتوى في الصفحة رقم 8

Notes Atd Tools Inc. 160 Enterprise Drive, Wentzville, MO 63385 Tel: (636)272-9050 Fax: (636)272-9044 www.atdtools.com