ملخص المحتوى في الصفحة رقم 1
SyncMaster 400TS-3, 460TS-3
LCD Display
User Manuals
The color and the appearance may differ depending on the
product, and the specifications are subject to change
without prior notice to improve the performance.
ملخص المحتوى في الصفحة رقم 2
Safety Instructions Notational Note These safety instructions must be followed to ensure your safety and prevent property damage. Make sure to read the instructions carefully and use the product in the correct manner. Warning / Caution Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment. Note Important to read and under- Prohibited stand at all times Disconnect the plug from the Do not disassemble outlet Ground to prevent an electric Do not
ملخص المحتوى في الصفحة رقم 3
Safety Instructions Do not forcefully bend or pull the power plug and do not place any heavy material on it. • Otherwise, this may result in fire. Do not connect multiple appliances to the same power outlet. • Otherwise, this may cause fire due to overheating. Do not disconnect the power cord while using the product. • Otherwise, this may result in damage to the product due to electric shock. To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, there
ملخص المحتوى في الصفحة رقم 4
Safety Instructions Keep heating appliances as far away from the power cord or the prod- uct as possible. • Otherwise, this may result in electric shock or fire. Do not install it in a badly ventilated location such as a bookcase or closet. • Otherwise, this may result in fire due to an increase in the internal temperature. When putting the product down, make sure to put it down softly. • Otherwise, this may result in damage to the screen display. Do not place the front of the product on the
ملخص المحتوى في الصفحة رقم 5
Safety Instructions Do not spray cleaner directly onto the surface of the product. • Otherwise, this may result in the discoloration and distortion of the structure and the screen surface may peel off. When cleaning the power plug pins or dusting the power outlet, clean it with a dry cloth. • Otherwise, it may result in fire. When cleaning the product, make sure to disconnect the power cord. • Otherwise, it may result in electric shock or fire. When cleaning the product, disconnect the power
ملخص المحتوى في الصفحة رقم 6
Safety Instructions If thunder or lightning is occurring, do not touch the power cord or antenna cable. • Otherwise, this may result in electric shock or fire. Do not try to move the monitor by pulling only the wire or the signal cable. • Otherwise, it may fall and result in electric shock, damage to the product or fire due to damage to the cable. Do not lift or move the product back and forwards or right and left while only holding the power cord or signal cables. • Otherwise, it may fall an
ملخص المحتوى في الصفحة رقم 7
Safety Instructions To avoid eyestrain, do not sit too close to the product. Take a rest for at least five (5) minutes after using the monitor for one (1) hour. This reduces eye fatigue. Do not install it in an unstable location such as an unstable rack or uneven surface or a location exposed to vibrations. • Otherwise, it may fall and cause personal injury and/or damage the product. • If you use the product in a location exposed to vibrations, it may damage the product and result in fire. W
ملخص المحتوى في الصفحة رقم 8
Safety Instructions The batteries (and rechargeable batteries) are not ordinary refuse and must be returned for recycling purposes. The customer is responsible for returning the used or rechargeable batteries for recycling. • The customer can return used or rechargeable batteries to a nearby public recycling center or to a store selling the same type of the battery or rechargeable battery. Do not place the product in a location exposed to direct sunlight or near any heat such as a fire or heat
ملخص المحتوى في الصفحة رقم 9
Introduction Package Contents Checking the Contents of the Package Remove the lock from the package box, as shown in the figure above. Lift up the package box by Check the contents of the Remove the Styrofoam and holding the grooves on both package. vinyl cover. sides of the package box. Note • After unpacking the package, make sure to check the contents of the package. • Store the packaging box in case you need to move the Product later. • If any items are missing, contact your dealer. • Conta
ملخص المحتوى في الصفحة رقم 10
Introduction Manuals Quick Setup Guide Warranty Card User's Guide (Not available in all loca- tions) Cables Power Cord D-Sub Cable USB Cable Others Remote Control Batteries (AAA X 2) (BP59-00138B) (Not available in all loca- tions) Sold separately Semi Stand KIT LAN Cable RGB to BNC Cable RGB to COMPONENT Ca- Network Box ble
ملخص المحتوى في الصفحة رقم 11
Introduction Sold separately Wall Mount KIT TV Tuner box RS232C Cable Note • Accessories that can be purchased with the product vary by country. Your LCD Display The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance. Front MENU button [MENU] Opens the on-screen menu and exits from the menu. Also use to exit the OSD menu or return to the previous menu. Navigate buttons (Up-Down buttons) Moves
ملخص المحتوى في الصفحة رقم 12
Introduction However, the picture may display abnormally if the connected external input signal is different from the selected video signal. • MagicInfo can only be enabled when a network box is connected. • A TV tuner box (sold separately) must be connected to use the TV. D.MENU button Opens the on-screen D.MENU. Note The D.MENU button is activated when a TV tuner is connected and otherwise, the PIP button is enabled. PIP button Push the PIP button to turn the PIP screen On / Off. Power button
ملخص المحتوى في الصفحة رقم 13
Introduction POWER S/W ON [ I ] / OFF Switches the LCD Display On/Off. POWER The power cord plugs into the LCD Display and the wall outlet. TOUCH SCREEN USB HUB Connects to a network box (sold separately) or PC in order to use the touchscreen. To use the touchscreen, install the touchscreen driver. RGB/COMPONENT IN (PC/COMPONENT Connection Terminal (Input)) • Connect the [RGB/COMPONENT IN] port on the monitor to the RGB port on the PC us- ing the D-SUB cable. • Connect the [RGB/COMPONENT I
ملخص المحتوى في الصفحة رقم 14
Introduction AV/COMPONENT AUDIO IN [R-AUDIO-L] Connect the [AV/COMPONENT AUDIO IN [R- AUDIO-L]] port on the monitor to the audio output port on the PC or on the external device using an audio cable. AV IN Connect the [AV IN] terminal of your monitor to the video output terminal of the external device using a VIDEO cable. AUDIO OUT Connect a headphone or an External speaker. DC OUT Make sure to use connecting [DC OUT] terminal to the authorized TV-Tuner Box[SBB_DTC/ ZA]. Otherwise, this may
ملخص المحتوى في الصفحة رقم 15
Introduction the product and the MagicInfo output of the net- work box must be connected to the [HDMI IN 2 (MAGICINFO)] terminal. For more information on how to purchase and in- stall a network box, contact Samsung Electronics. RJ 45 MDC (MDC PORT) MDC(Multiple Display Control) Program Port Connect the LAN cable to [RJ45 MDC] on the product and LAN on the PC. To use an MDC, the MDC Program must be installed on the PC. Note Go to Multi Control and select RJ45 MDC as the MDC Connection. RS232
ملخص المحتوى في الصفحة رقم 16
Introduction 2. Slide the end of the cable with the lock at- tached through the looped end of the Ken- sington lock cable. 3. Insert the Kensington Lock into the security slot ( ) on the back of the display. 4. Lock the lock ( ). Note • These are general instructions. For exact in- structions, see the User Manual supplied with the locking device. • You can purchase the locking device from an electronics store, an online shop, or our serv- ice Center. Connecting a Network Box (sold separately)
ملخص المحتوى في الصفحة رقم 17
Introduction POWER Connect the [POWER] terminal of the product and the [POWER] terminal of the monitor using a power extension cable. POWER Connects to a mains socket via the power cord. POWER S/W ON [ I ] / OFF Turns the network box on or off. Note • See the "Connections" section for details about cable connections. • The power switches of both of the monitor and the network box must be turned on for the network box to operate normally. Remote Control Note The performance of the remote cont
ملخص المحتوى في الصفحة رقم 18
Introduction MENU RETURN EXIT MagicInfo Turns the product On. POWER Turns the product Off. OFF Used to enter the password during the OSD adjustment or to use Number Buttons MagicInfo. Press to change the channel. The "-" button is used to select Digital channels. DEL / GUIDE button Electronic Program Guide (EPG) display. Note This button can only be used in TV mode while a TV tuner box (sold separately) is connected. Adjusts the audio volume. + VOL - Selects a connected external input
ملخص المحتوى في الصفحة رقم 19
Introduction You can select the PC, DVI, HDMI or DP(DisplayPort) external input directly in a mode other than TV mode. TV channels provide written information services via teletext. TTX/MIX - Teletext Buttons Note This function does not work for this LCD Display. MTS- MTS/DUAL You can select MTS (Multichannel Television Stereo) mode. Audio Type MTS/S_Mode Default FM Stereo Mono Mono Manual Change Stereo Mono ↔ Stereo SAP Mono ↔ SAP Mono DUAL- STEREO/MONO, DUAL l / DUAL ll and MONO/NICAM MONO/
ملخص المحتوى في الصفحة رقم 20
Introduction Returns to the previous menu. RETURN Exits from the menu screen. EXIT MagicInfo Quick Launch Button. MagicInfo Note Enabled when a Network box is connected. User Installation Guide Note • Be sure to call an installation expert of Samsung Electronics to install the product. • The warranty becomes invalid if the product is installed by someone other than a professional authorized by Samsung Electronics. • A Samsung Electronics service center can provide details. Tilt Angle and Ro
