ملخص المحتوى في الصفحة رقم 1
LC-37G4U
LC-32G4U
TU-GA1U-S
LIQUID CRYSTAL TELEVISION
ENGLISH
OPERATION MANUAL
Display
Model No.:
Serial No.:
AVC System
IMPORTANT:
Model No.:
To aid reporting in case of loss or theft, please record
the TV’s model and serial numbers in the space
provided. The numbers are located at the rear of the
Serial No.:
TV and the AVC System.
IMPORTANT INFORMATION
WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
The lightning flash with arrow-head
symbo
ملخص المحتوى في الصفحة رقم 2
IMPORTANT INFORMATION CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. CAUTION: DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART, STAND, TRIPOD, BRACKET, OR TABLE. THE PRODUCT MAY FALL CAUSING SERIOUS PERSONAL INJURY AND SERIOUS DAMAGE TO THE PRODUCT. USE ONLY WITH A CART, STAND, TRIPOD, BRACKET, OR TABLE RECOMMENDED BY THE MANUFACTURER OR SOLD WITH THE PRODUCT. FOLLOW THE MANUFACTURER’S INSTRUCTIONS WHEN INSTALLING THE PRODUCT AND USE MOUNTING ACCESSORIES RE
ملخص المحتوى في الصفحة رقم 3
DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Precautions carefully before using this product. IMPORTANT SAFETY INSTRUCTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. H
ملخص المحتوى في الصفحة رقم 4
IMPORTANT SAFETY INSTRUCTIONS • Water and Moisture — Do not use this product near water – for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like. • Stand — Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table recommen
ملخص المحتوى في الصفحة رقم 5
IMPORTANT SAFETY INSTRUCTIONS • Outdoor Antenna Grounding — If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, Iocation of
ملخص المحتوى في الصفحة رقم 6
Contents IMPORTANT INFORMATION …………………… XX Rec. Mode ……………………………………… XX Trademarks ………………………………………… XX Pre Record ……………………………………… XX DEAR SHARP CUSTOMER ……………………… XX Repeat Play …………………………………… XX IMPORTANT SAFETY INSTRUCTIONS ………… XX Protecting motion picture files ……………… XX Contents …………………………………………… XX Displaying a motion picture ………………… XX Supplied accessories …………………………… XX Format …………………………………………… XX Preparation ………………………………………… XX Deleting a motion picture file ………………… XX Attaching speake
ملخص المحتوى في الصفحة رقم 7
Supplied accessories Make sure the following accessories are provided with the product. AVC System: TU-GA1U-S Remote control unit (g1) “AAA” size battery (g2) System cable (g1) RRMCGA263WJSA QCNW-B856WJZZ Page XX Page XX Page XX Stand unit (for AVC System) (g1) AC cord (g1) RF cable (g1) GDAI-A104WJSB QACCDA019WJPZ QCNW-A342WJZZ Page XX Pages XX and XX PSPAHA314WJZZ Operation manual (g1) GLEGGA013WJZZ LC-37G4U LC-32G4U TU-GA1U-S XBPSN50P16JS0 Stand (g1) Stand spacer (g4) Stand cushion (g4) Stand
ملخص المحتوى في الصفحة رقم 8
Supplied accessories Make sure the following accessories are provided with the product. Display: LC-37G4U AC cord (g1) Cable clamp (g1) Bracket unit (g1) QACCDA019WJPZ LHLDW0110CEZZ CHLDZA331WJ02 Page XX Page XX Page XX Speaker unit (g1) Left speaker Right speaker DSP-ZA053UJ03 DSP-ZA053UJ04 Page XX Page XX Display: LC-32G4U AC cord (g1) Cable clamp (g1) QACCDA019WJPZ LHLDW0110CEZZ Page XX Page XX 8
ملخص المحتوى في الصفحة رقم 9
Preparation Attaching speakers LC-37G4U 1 5 Peel off the tape holding the ends of the cables, Fasten the speaker cable with the holder. and move cables towards behind the display. • Connect the ends of the cables to the speaker terminals as shown in the illustration. 2 6 Hook the W hole of the speaker to the screw of the Fix the speaker terminal cover. Display. 3 7 Turn the speaker to the front of the Display Align the nub of the bracket into the groove and (direction of the arrow) and fit it to
ملخص المحتوى في الصفحة رقم 10
Preparation Where to place the System “System” means the Display and AVC System. First select the location where to place the System. 1 Selecting the location of the System • Select a place with no direct sunlight and good ventilation. • The Display and the AVC System are connected by the system cable. (See page XX for details.) If you want to keep a longer distance between the Display and AVC System, please purchase the optional system cable AN-07SC2 (about 23 feet/7 meters). (See page XX.) Sys
ملخص المحتوى في الصفحة رقم 11
Preparation Setting the System After putting the Display and the AVC System in place, connect the system cables and AC cords. Use the cable clamps for bundling the cables. Removing the terminal cover 1 Display (rear view) Press the two hooks toward the center of the Display and remove the cover toward you. Press down the two upper hooks to remove the cover toward you. 2 Connecting the system cable and the AC cord to the Display (WHITE) Connect the plug into the terminal and secure it by tighteni
ملخص المحتوى في الصفحة رقم 12
Preparation 4 Attaching the clamp and bundling the cables with the clamp Cable clamp Insert the cable clamp in the hole on the Display as shown. Display (rear view) 5 Closing the terminal cover Cables come out from the small opening. 12
ملخص المحتوى في الصفحة رقم 13
Preparation Setting the AVC System with the stand How to install the AVC System vertically using the stand unit. • Use the supplied stand unit for installing the AVC System vertically in an upright position. Stick each spacer to the Attach each cushion to Fit the stand to the AVC 1 stand as shown. 2 the stand as shown. 3 System. Insert the stand into the AVC Peel each spacer away from the paper Peel each cushion System, making sure that the and attach to the four bulging areas away from the thic
ملخص المحتوى في الصفحة رقم 14
Preparation Removing speakers LC-32G4U 1 4 Unfasten the screw used to secure the speaker Take off the speaker cable cover. bracket. 2 5 Take off the speaker terminal cover. Unfasten the screws. 3 Disconnect the cable from the speaker. CAUTION • Do not remove the stand and speaker from the Display unless using an optional bracket to mount it. NOTE • Perform the same steps for right speaker. • To attach the speakers, perform the steps in reverse order. 14
ملخص المحتوى في الصفحة رقم 15
Preparation Removing the stand Before detaching (or attaching) stand, unplug the AC cord from the AC input and the system cable from the Display. CAUTION • Do not remove the stand from the Display unless using an optional wall mount bracket to mount it. Before attaching/detaching stand • Before performing work make sure to turn off the System. • Before performing work spread cushioning over the base area to lay the Display on. This will prevent it from being damaged. 2 1 Unfasten the four screws
ملخص المحتوى في الصفحة رقم 16
Preparation Inserting the batteries If the remote control fails to operate Liquid Crystal Television functions, replace the batteries in the remote control unit. 1 Open the battery cover. 2 Insert two “AAA” size batteries 3 Close the battery cover. (supplied with the product). • Place the batteries with their terminals corresponding to the (e) and (f) indications in the battery compartment. CAUTION Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instr
ملخص المحتوى في الصفحة رقم 17
Part names Display VOLUME buttons INPUT MAIN POWER (VOLl/k ) button button CHANNEL buttons POWER button (CHs/r) Remote control sensor POWER indicator OPC sensor *OPC: Optical Picture Control (See page XX.) 17
ملخص المحتوى في الصفحة رقم 18
Part names AVC System Front view INPUT 3 terminal (VIDEO) INPUT 3 terminals (AUDIO L/R) STANDBY/ON indicator INPUT 3 terminal (S-VIDEO) POWER button CARD indicator How to open the door. RESET* SYSTEM RESET** Headphone PC CARD slot (When connecting headphones, the sound from the speakers is muted.) * If the AVC System is switched on but it does not appear to be operating correctly, it may need resetting. In this case, press RESET, shown in the diagram, lightly with the end of a ballpoint pen or o
ملخص المحتوى في الصفحة رقم 19
Part names Bottom view The name plate is attached on the bottom of the AVC System. Confirm it if necessary. 1 TV POWER: Switch the Liquid Crystal Television power Remote control unit on or off. (See page XX.) 2 DISPLAY: Display the channel information. 115 3 SOURSE POWER: Turns the power of the external equipment on and off. 4 External equipment operational buttons: Operate the external equipment. 50 – 9: Set the channel. 2 3 16 6 ANT-A/B: Select between ANT-A and B to watch broadcasts via the t
ملخص المحتوى في الصفحة رقم 20
Watching TV Simple operations for watching a TV program Antennas To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector, plug it into the antenna terminal at the rear of the AVC System. NOTE • The antenna and the cable converter cannot be connected at the same time. F-type connector 1. A 75-ohm system is generally a round ca
