Edelbrock 15022 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

MAP Sensor Voltage Clamp
For Turbocharged 1992-1998 Honda Civics
®
Catalog #15022
INSTALLATION INSTRUCTIONS
PLEASE study these instructions carefully before installing your new MAP Sensor Voltage Clamp for turbocharged or supercharged 1992-
1998 Honda Civics. If you have any questions or problems, do not hesitate to contact our Technical Hotline at: 1-800-416-8628, from
7am-5pm, Pacific Standard Time, Monday-Friday, or via e-mail at: Edelbrock@Edelbrock.com. Please fill out and mail your warran

ملخص المحتوى في الصفحة رقم 2

1996-1998 VEHICLES Wire Side Female Terminals Tap Into The ECU’s Power Source: 1 2 3 4 5 6 7 8 9 10 11 INJ 4 INJ 3 INJ 2 INJ 1 S02SHTC P02SHTC ESOL/E-EGR VTSOL LG 1 PG 1 IGP 1 Locate the Ignition Power wire (yellow / black stripe), in A 12 13 14 15 16 17 18 19 20 22 23 24 IACV IACVN IACVP PCS FLR ACC MIL ALTC ICM LG 2 PG 2 IGP 2 position A-11 (See Fig. 2). Cut and strip both ends of the 32 Pin 25 27 28 29 30 cut wire. With a splice connector, connect them both to the VREF FANC