ملخص المحتوى في الصفحة رقم 1
OWNER’S MANUAL
Integrated High definition
LCD Television
HIGH-DEFINITION TELEVISION
High definition programming is required to view High
Definition TV broadcasts. Please contact your cable or
satellite provider.
For an overview of steps for setting up
Owner’s Record
and using your new TV, see page 8.
The model number and serial number are on the back
of your TV. Record these numbers in the spaces below.
Refer to these numbers whenever you communicate
with your Toshiba dealer about this TV.
M
ملخص المحتوى في الصفحة رقم 2
Dear Customer, Thank you for purchasing this Toshiba LCD TV. This manual will help you use the many exciting features of your new LCD TV. Child Safety Before operating your LCD TV, please read this manual completely and keep it nearby for future reference. It Makes A Difference Where Your TV Stands Safety Precautions WARNING: TO REDUCE THE RISK OF FIRE OR Congratulations on your purchase! As you enjoy ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE your new TV, keep these safety tips in mind: TO RA
ملخص المحتوى في الصفحة رقم 3
Important Safety Instructions Installation, Care, and Service 1) Read these instructions. Installation 2) Keep these instructions. Follow these recommendations and precautions and heed all 3) Heed all warnings. warnings when installing your TV: 4) Follow all instructions. 16) Never modify this equipment. Changes or modifications 5) Do not use this apparatus near water. may void: a) the warranty, and b) the user’s authority to operate this equipment under the rules of the Federal 6) Clean only wi
ملخص المحتوى في الصفحة رقم 4
Installation (cont. from previous page) Care (cont. from previous column) 30) WARNING: RISK OF ELECTRIC SHOCK! 25) Always make sure the antenna system is properly Never spill liquids or push objects of any kind grounded to provide adequate protection against voltage into the TV cabinet slots. surges and built-up static charges (see Section 810 of the National Electric Code). Antenna lead-in wire 31)While it is thundering, do not touch the connecting cables or apparatus. Antenna discharge unit (N
ملخص المحتوى في الصفحة رقم 5
FCC Declaration of Conformity Compliance Statement (Part 15): there is no guarantee that interference will not occur in a particular The Toshiba 27HL95 LCD Color Televisions comply installation. If this equipment does cause harmful interference to with Part 15 of the FCC rules. radio or television reception, which can be determined by removing Operation is subject to the following two conditions: (1) and applying power to the equipment, the user is encouraged to try to correct the interference b
ملخص المحتوى في الصفحة رقم 6
Contents (Continued from previous page) Remote control codes ......................................................... 24 Switching between two channels using Using the remote control to operate a cable converter Channel Return ...................................................... 60 box, satellite receiver, VCR, DVD player, or HTIB Switching between two channels using ™ (home theater in a box) .................................................. 26 SurfLock ................................
ملخص المحتوى في الصفحة رقم 7
Introduction 1 Welcome to Toshiba Thank you for purchasing this Toshiba TV, one of the innovative LCD TVs on the See “Important notes about your market. LCD TV” on page 5. The goal of this manual is to guide you through setting up and operating your TV as quickly as possible. • This manual applies to model 27HL95. Before you proceed, check the model number on the back of your TV. •Instructions in this manual are based on using the remote control. You also can use the controls on the TV top panel
ملخص المحتوى في الصفحة رقم 8
Chapter 1: Introduction Overview of steps for installing, setting up, and using your new TV Follow these steps to set up your TV and begin using its many exciting features. 1. Carefully read the important safety, installation, 11. See “Menu layout and navigation” for a quick overview care, and service information on pages 2–5. Keep of navigating the TV’s menu system (pages 29–30). this manual for future reference. 12. See Chapter 5 for details on setting up the TV Guide ® 2. Observe the followin
ملخص المحتوى في الصفحة رقم 9
Connecting your TV 2 TV top panel and side panel controls and connections VOLUME x • 9 TV top CHANNEL zy TV/VIDEO 8 3 Top panel * * 0 6 * Swivel angle 7 GUIDE MENU 4 5 POWER (ENTER)** EXIT x •zy TV side panel TV front !¡ VIDEO-2 IN !™ Headphone jack Green/Red LEDs 2 1 Remote sensor ___________ ** The MENU button on the TV top panel functions as the ENTER button in the ® TV Guide On Screen system or when a menu is on-screen. 1 Remote sensor — Point the remote control toward this 8 CHANNEL yz — Wh
ملخص المحتوى في الصفحة رقم 10
Chapter 2: Connecting your TV TV back panel connections TV upper back panel Before connecting an external device to the TV, remove the applicable panel cover by squeezing the tab(s) in the direction of the arrow ( ) and pulling the cover. TV back 2 3 Power cord 4 Cable clamper 6 59 TV lower back panel 7 10 8 1 ANT-1 (CABLE) IN and ANT-2 IN — Two inputs that 5 DIGITAL AUDIO OUT — Optical audio output in Dolby support analog (NTSC) and digital (ATSC) off-air antenna Digital or PCM (pulse-code modu
ملخص المحتوى في الصفحة رقم 11
Chapter 2: Connecting your TV Overview of cable types ® Note: One dual-wand IR blaster/G-LINK cable is included with your TV. All other required cables, if not provided with your other devices, can be purchased at many electronics accessory suppliers. Coaxial (F-type) cable ● Coaxial (F-type) cable is used for connecting your antenna, cable TV service, and/or cable converter box to the ANT-1 and/or ANT-2 RF inputs on your TV. ● Standard A/V cables (composite video) usually come in sets of three,
ملخص المحتوى في الصفحة رقم 12
Chapter 2: Connecting your TV About the connection illustrations You can connect different types and brands of devices to your TV in several different configurations. The connection illustrations in this manual are representative of typical device connections only. The input/output terminals on your devices may differ from those illustrated herein. For details on connecting and using your specific devices, refer to each device’s owner’s manual. Connecting a CableCARD™ This digital television is
ملخص المحتوى في الصفحة رقم 13
Chapter 2: Connecting your TV Connecting a VCR and antenna or Cable TV (no Cable box) From Cable TV or antenna You will need: one signal splitter IN Signal splitter three coaxial cables OUT OUT two sets of standard A/V cables Stereo VCR • For better picture performance, if your VCR has S-video, use an S-video cable (plus the audio cables) instead of the standard video VIDEO AUDIO cable. However, do not connect both types of video cables to LR IN from ANT CH 3 IN VIDEO 1 at the same time o
ملخص المحتوى في الصفحة رقم 14
Chapter 2: Connecting your TV Connecting a VCR and Cable box From Cable TV You will need: one signal splitter IN Signal splitter Cable box five coaxial cables OUT OUT IN CH 3 CH 4 OUT two sets of standard A/V cables Stereo VCR • For better picture performance from your VCR: If your VCR has S-video, connect an S-video cable (plus the audio cables) instead VIDEO AUDIO LR of the standard video cable. Do not connect an S-video cable and IN from ANT CH 3 IN a standard video cable to VIDEO 1 at
ملخص المحتوى في الصفحة رقم 15
Chapter 2: Connecting your TV Connecting a VCR and satellite receiver From antenna You will need: IN Signal splitter one signal splitter OUT OUT four coaxial cables one set of component video cables (if your Stereo VCR satellite receiver does not have component VIDEO AUDIO LR IN from ANT video, connect the standard A/V cables only) CH 3 IN CH 4 one pair of standard audio cables OUT to TV OUT three sets of standard A/V cables LR • For better picture performance, if your satellite recei
ملخص المحتوى في الصفحة رقم 16
Chapter 2: Connecting your TV Connecting a DVD player with S-video, a VCR, and a Cable box From antenna or Cable TV You will need: one signal splitter IN Signal splitter Cable box five coaxial cables OUT OUT IN CH 3 CH 4 OUT two sets of standard A/V cables Note: If you have a mono VCR, connect L/MONO on the TV Stereo VCR (VIDEO 1) to your VCR’s audio out terminal using the white VIDEO AUDIO audio cable only. LR IN from ANT CH 3 IN one S-video cable CH 4 OUT to TV OUT one pair of stand
ملخص المحتوى في الصفحة رقم 17
Chapter 2: Connecting your TV ® Connecting a DVD player with ColorStream (component video) and a VCR ® From antenna or Cable Your TV has ColorStream (component video) inputs. You will need: IN Signal splitter one signal splitter OUT OUT three coaxial cables Stereo VCR two sets of standard A/V cables VIDEO AUDIO LR IN from ANT • For better picture performance, if your VCR has S-video, use an CH 3 IN CH 4 S-video cable (plus the audio cables) instead of the standard OUT to TV OUT video cabl
ملخص المحتوى في الصفحة رقم 18
Chapter 2: Connecting your TV Connecting two VCRs From antenna or Cable You will need: one signal splitter ** IN Signal splitter three coaxial cables OUT OUT two sets of standard A/V cables • For better picture performance, if VCR 1 has S-video, use VCR1 (plays) an S-video cable (plus the audio cables) instead of the VIDEO AUDIO standard video cable. However, do not connect both types LR IN from ANT of video cable to VIDEO 1 at the same time or the picture CH 3 IN CH 4 performance will be
ملخص المحتوى في الصفحة رقم 19
Chapter 2: Connecting your TV ™ Connecting an HDMI or a DVI device to the HDMI input [1] The HDMI input on your TV receives digital audio and __________________________________________________________________ [1] uncompressed digital video from an HDMI device or HDMI = High-Definition Multimedia Interface. [2] [2] uncompressed digital video from a DVI device. DVI = Digital Video Interface. [3] [3] HDCP = High-bandwidth Digital Content Protection. This input is designed to accept HDCP program mat
ملخص المحتوى في الصفحة رقم 20
Chapter 2: Connecting your TV Connecting a digital audio system Dolby Digital decoder or The TV’s DIGITAL AUDIO OUT terminal outputs a Dolby other digital audio system Digital or 2-channel down-mixed PCM (pulse-code modulation) signal for use with an external Dolby Digital Optical LINE IN Audio IN LR decoder or other external audio system with optical audio input. You will need: one optical audio cable (Use an optical audio cable that has the larger “TosLink” connector and not the smaller “
