ملخص المحتوى في الصفحة رقم 1
™
32” CLASS RAZOR LED LCD HDTV
E321MV – user manual
ملخص المحتوى في الصفحة رقم 2
This product qualifies for ENERGY STAR in the “factory default” setting and this is the setting in which power savings will be achieved. Changing the factory default picture settings or enabling other features will increase power consumption that could exceed the limits necessary to qualify for ENERGY STAR rating. ® HDMI, the HDMI logo and High-Definition Multimedia SRS TruSurround HD and SRS TruVolume are trademarks Manufactured under license from Dolby Laboratories. of SRS Labs, Inc. Tr
ملخص المحتوى في الصفحة رقم 3
Welcome Thank You for Choosing VIZIO My Product Information And congratulations on your new VIZIO HDTV. To get the most out of your new VIZIO product, read these instructions before using your product and retain them for future reference. Be sure to inspect the package contents to ensure there are no missing or damaged parts. Product Registration To purchase or inquire about accessories and installation services for your VIZIO product, visit our website at www.VIZIO.com or call toll free at
ملخص المحتوى في الصفحة رقم 4
E321MV to rain or moistur e, does not operate normally or has been dr opped. Important Safety Instructions • Unplug the power cor d befor e cleaning your TV . Your DTV is designed and manufactured to operate within defined design • When moving your TV fr om an ar ea of low temperatur e to an ar ea of limits. Misuse may result in electric shock or fire. To prevent your TV from being high temperatur e, condensation may form in the housing. W ait befor e damaged, the following instructio
ملخص المحتوى في الصفحة رقم 5
E321MV • Do not overload power strips and extension cor ds. Overloading can cause the batteries to leak which can damage the r emote contr ol or r esult in fir e or electric shock. injur e the operator . Do not expose batteries to excessive heat such as sunshine, fir e or the like. • The wall socket should be installed near your TV and easily accessible. • If any of the following occurs, contact the dealer: • Only power of the marked voltage can be used for your TV . Any other
ملخص المحتوى في الصفحة رقم 6
E321MV Television Antenna Connection Protection DTV Transition Advisory If an outside antenna/satellite dish or cable system is to be connected to the TV, The nationwide switch to digital television broadcasting was complete on June make sure that the antenna or cable system is electrically grounded to provide 12, 2009. Analog-only television sets that receive TV programming through an some protection against voltage surges and static charges. antenna now need a converter box to continue to
ملخص المحتوى في الصفحة رقم 7
Table of Contents Setting the Time Zone .......................................................................... 16 Table of Contents .....................................................................7 Adjusting the Time for Daylight Savings .............................................. 17 Installing the TV .......................................................................1 Enabling or Disabling Automatic Date and Time Updates................... 17 Inspecting the Package Contents ..
ملخص المحتوى في الصفحة رقم 8
E321MV Resetting the Picture Settings ............................................................. 28 ON PARTS AND LABOR ......................................................................... 36 Using the Parental Controls .................................................................... 28 Parts and Labor ................................................................................... 36 Accessing the Parental Controls Menu ................................................ 28 Type of
ملخص المحتوى في الصفحة رقم 9
Installing the TV 1 Inspecting the Package Contents Installing the TV Before installing your new TV, take a moment to inspect the package contents. After removing the TV from the box and inspecting the package contents you can Use the images below to ensure nothing is missing or damaged. begin installing the TV. Your TV can be installed in two ways: When you have completed your inspection, install the TV. • On a flat surface, using the included stand • On a wall, using a VESA-standar d wall m
ملخص المحتوى في الصفحة رقم 10
E321MV 1 Installing the TV on a Wall 3. Turn the attached thumbscrew until it is completely tightened. To mount your TV on a wall, you will need a wall mount. Consult the information below to find the appropriate mount for your TV model: Fold down the thumbscrew tab so it is flat against the bottom of the base. E321MV Screw Size: M6 Screw Length: 15mm Screw Pitch: 1mm 4. Move the TV with attached stand into Hole Pattern: 200mm x 200mm an upright position and place on a flat, level,
ملخص المحتوى في الصفحة رقم 11
E321MV 1 3. Turn the attached thumbscrew until it is completely loosened. 4. Gently remove the stand neck. 5. Attach your TV and wall mount to the wall, carefully following the instructions that came with your mount. Use only with a UL-listed wall mount bracket rated for the weight/load of this TV. See Appendix A - Specifications for the weight of this TV. 3
ملخص المحتوى في الصفحة رقم 12
Controls and Connections 2 Rear Panel USB: Connect a USB thumb drive to view photos. HDMI (1,2,3): Connect HDMI devices. USB Component: Connect component device. Composite: Connect composite device. 3.5mm Stereo Out: Connect 3.5mm audio device. Cable/Antennal: Connect RF/Coaxial connector from cable, antenna, or satellite box. HDMI (1,2,3) RGB PC: Connect RGB cable from computer. Use 3.5mm port to connect PC audio. 3.5mm PC Connect 3.5mm cable from PC audio out when using Audio In: RGB PC p
ملخص المحتوى في الصفحة رقم 13
E321MV 2 Right Side Panel Front Panel Power Remote Control Sensor VIZIO Light Menu Front Panel Channel Up Remote Control Sensor: When using the remote, point it directly at this sensor. Channel Down VIZIO Light: This light is white when the TV is on. When the TV is off, the light is orange. Volume Up Volume Down Input Right Side Panel Power: Turn the TV on or off. Menu: Display on-screen menu. Channel Up/Down: Change the channel. Volume Up/Down: Increase or decrease the loudness of the TV aud
ملخص المحتوى في الصفحة رقم 14
E321MV 2 Remote Control Power/Standby: Turn the TV on or off. Input: Change the input device. A/V Controls: Control external device (CEC-enabled devices only). Info: Display the Info Window. CC: Open the Closed Captioning menu. Menu: Display the on-screen menu. Input Power/Standby Exit: Close the on-screen menu. A/V Controls Arrow: Navigate the on-screen menu and episode CC Info guide. OK: Select highlighted menu option. Exit Menu Guide: Display the episode guide (digital channels OK Arrow o
ملخص المحتوى في الصفحة رقم 15
E321MV 2 Replacing the Batteries 1. Remove the battery cover by pressing gently on the “V” and pushing the cover away from the remote. 2. Insert two AAA batteries into the remote control. Make sure that the (+) and (-) symbols on the batteries match the (+) and (-) symbols inside the battery compartment. 3. Replace the battery cover. • Use only good quality batteries. • Inserting the batteries incorrectly may result in cracking or leakage that may cause a fire or result in injury.
ملخص المحتوى في الصفحة رقم 16
Connecting Your Devices 3 Your HDTV can be easily connected to an external device: Connecting Your Devices • DVD or Blu-Ray player Once you have determined the best available connection type on both your • Video game console device and the TV, ensure you have the corresponding cable. • Cable box To connect a device to the TV: • Exter nal antenna 1. Ensure both the TV and your device are off. • Or other device 2. Connect the device and the TV. Use the best available connection. See the Bef
ملخص المحتوى في الصفحة رقم 17
E321MV 3 Select one of the connection types. Use the cable(s) shown to connect the TV to your device. Select One: HDMI DIGITAL BEST OR RF/ DIGITAL / COAXIAL ANALOG OR RGB ANALOG BETTER OR COMPONENT ANALOG OR COMPOSITE ANALOG AV GOOD Device Connection Chart 9
ملخص المحتوى في الصفحة رقم 18
Completing the First-Time Setup 4 The first time you turn on the TV, the Setup App will guide you through each of 4. If the TV is connected to an external the steps necessary to get your TV ready for use. antenna, select Antenna, then press OK and go to step 5. Before you begin the first-time setup: If the TV is connected to a cable • Y our TV should be installed and the power cor d should be connected service without a set-top box (cable is to an electrical outlet. connected directly f
ملخص المحتوى في الصفحة رقم 19
Adjusting the TV Settings 5 From the TV Settings Menu, you can: Changing the Input Source • Change the input sour ce or External devices such as DVD players, Blu-Ray Players, and video game consoles r ename inputs can be connected to your TV. To display one of these devices on your TV, you • Set up channels must first change the input source in the on-screen menu. • Change the on-scr een menu language To quickly access the Input Source menu, press the INPUT button • Change the TV’ s da
ملخص المحتوى في الصفحة رقم 20
E321MV 5 Customizing Input Names Setting Up Channels When you have multiple devices connected to your TV, it can become difficult to remember the inputs to which they are connected. Your TV features the ability to From the channel menu you can: customize the names of these inputs to make them easy to remember. (Custom • Change the signal sour ce names have a 10-character limit.) • Start a new channel scan For example, HDMI 1 could be renamed as My Blu-ray. • Scan for new/additional channels
