ملخص المحتوى في الصفحة رقم 1
Installation and Assembly:
Universal Flat Wall Mount for 22" - 37" Screens
Model: MT80 THIN
Features:
• Universal design for 22" to 37" plasma and LCD screens
• Low-profile design keeps the screen close up against the wall
Max Load Capacity: 80 lb (36.3 kg)
Visit the Westinghouse Web Site at www.westinghousedigital.com For customer service call 1-866-287-5555.
ISSUED: 03-02-05 SHEET #: 201-9323-1
ملخص المحتوى في الصفحة رقم 2
Note: Read entire instruction sheet before you start installation and assembly. WARNING • Do not begin to install your Westinghouse product until you have read and understood the instructions and warnings contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, please call Peerless customer service at 1-800-729-0307. • Make sure that the wall will safely support the combined load of the equipment and all attached hardware and compo- nents. •
ملخص المحتوى في الصفحة رقم 3
Before you begin, make sure all parts shown are included with your product. Parts List MT80 THIN Description Qty Part # AA wall plate 1 200-4629 BB adapter bracket 2 200-4628 CC #14 x 2.5" wood screw 4 5S1-015-C04 DD M5 x .8 x 25 mm socket head cap screw 2 520-9567 EE Alligator® anchor 4 590-0097 FF 4 mm security allen wrench 1 560-1145 AA BB FF DD EE CC ISSUED: 03-02-05 SHEET #: 201-9323-1 3 of 8 Visit the Westinghouse Web Site at www.westinghousedigital.com
ملخص المحتوى في الصفحة رقم 4
Installation to Single Wood Stud Wall WARNING • Installer must verify that the wall will safely support four times the combined weight of all attached equipment and hardware. Use stud finder to locate stud centers. Place wall plate (AA) on wall as template, level wall plate and mark center 1 of studs with pencil. Drill three 5/32" (4 mm) dia. holes 2-1/2" (65 mm) deep. Attach wall plate (AA) using three #14 x 2.5" wood screws (CC). Skip to step 2 on page 7. WARNING • Tighten wood screws so that
ملخص المحتوى في الصفحة رقم 5
Installation to Double Wood Stud Wall WARNING • Installer must verify that the wall will safely support four times the combined weight of all attached equipment and hardware. Use stud finder to locate stud centers. Place wall plate (AA) on wall as template, level wall plate and mark center 1 of studs with pencil. Drill four 5/32" (4 mm) dia. holes 2-1/2" (65 mm) deep. Attach wall plate (AA) using four #14 x 2.5" wood screws (CC). Skip to step 2 on page 7. WARNING • Tighten wood screws so that wa
ملخص المحتوى في الصفحة رقم 6
solid concrete cinder block Installation to Solid Concrete or Cinder Block WARNING • When installing Westinghouse wall mounts on cinder block, verify that you have a minimum of 1-3/8" of actual con- crete thickness in the hole to be used for the concrete anchors. Do not drill into mortar joints! Be sure to mount in a solid part of the block, generally 1" minimum from the side of the block. Cinder block must meet ASTM C-90 specifica- tions. It is suggested that a standard electric drill on slow s
ملخص المحتوى في الصفحة رقم 7
Note: Before starting this step refer to accompanying instruction sheet to install adapter brackets to flat panel screen. Installing Flat Panel Screen to Wall Plate Insert two M5 x 25 mm socket head cap screws (DD) into mounting brackets (BB) and tighten a few turns to hold in 2 place as shown in detail 1. Hang screen by the mounting brackets (BB) on wall plate (AA) as shown below. Make sure screen is safely hooked on mount before letting go. Screen can be adjusted horizontally if desired. WARNI
ملخص المحتوى في الصفحة رقم 8
Limited Five-Year Warranty Westinghouse Digital Electronics warrants to original end-users of this Westinghouse television mounting product (the “Product”) that the Product will be free from defects in material and workmanship, under normal use, for a period of five (5) years from the date of purchase by the original end-user, subject to the following terms and conditions: REPAIR OR REPLACEMENT – For a period of five (5) years from the original date of purchase, Westinghouse Digital Electronics
ملخص المحتوى في الصفحة رقم 9
Installing Adapter Brackets to Model: MT80 THIN the Flat Panel Screen Begin with product installation and assembly manual before reading this instruction manual. Parts List Description Qty. Part # A M4 x .7 x 12 mm phillips screw 6 504-9013 C M4 x .7 x 25 mm phillips screw 6 504-1015 E M5 x 40 mm pan head phillips scew 4 520-1199 F M6 x 25 mm pan head phillips screw 4 520-1208 G M6 x 1 x 20 mm pan head phillips screw 4 520-9402 H M5 x .8 x 12 mm pan head phillps screw 4 520-1027 I M6 x 1 x 12 mm
ملخص المحتوى في الصفحة رقم 10
To assemble the adapter brackets to your screen, begin with the table on pages 2 and 3. Find the configuration that corresponds to your screen. Refer to the configuration table on page 3 to install the adapter brackets. Notes: The Universal Flat Wall Mount is a universal mount which accommodates a wide variety of screens. If your particular screen is not listed on pages 2 and 3 or unsure which configuration matches your screen, please contact customer service to ensure product compatibility. S
ملخص المحتوى في الصفحة رقم 11
Screen Manufacturer Manufacturer Model Config. Size Sony 32" KDL-32XBR950 G Sony 32" KLV-32M1 A Studio Experience 30" SELCD300 I Syntax 27" LT27HV A Syntax 30" LT30HV A Tatung 23" V23CLTT K Tatung 27" V27CMTT A Tatung 30" V30CMTT A Toshiba 26" 26HL83 A Toshiba 26" 26HL84 A Toshiba 32" 32HL84 A ToteVision 22" LCD-2200VT, LCD-2216TD K ViewSonic 22.2" VP2290b K ViewSonic 23" VP230mb K Viewsonic 27" N2700w I Viewsonic 30" N3000w C Viewsonic 30" N3020w C Westinghouse 27" LTV-27w2 A Westinghouse 27" W
ملخص المحتوى في الصفحة رقم 12
Installing Adapter Brackets To prevent scratching the screen, set a cloth on a flat, level surface that will support the weight of the screen. Place 2 screen face side down. If screen has knobs on the back, remove them to allow the adapter brackets to be attached. Place adapter brackets (BB) on back of screen, align to holes, and center on back of screen as shown in figure 2.1. Refer to step 1 to determine the proper fasteners to use. Attach the adapter brackets to the back of the screen using t
