SkyLink G6MR دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Garage Door
Model G6MR
Remote Control
1. INTRODUCTION 2. INSTALLATION (CONT)
®
Congratulations on your purchase of the Skylink G6MR Universal Garage If you have the multi-function wall console, do not replace the wall
TM TM
Door Remote Control. This is a kit with a universal remote control and console by the Smart Button . You need to install the Smart Button in
TM
Smart Button . It is 100% compatible with all garage door openers. parallel with your existing wall console.
TM
Simply replace the t

ملخص المحتوى في الصفحة رقم 2

3. OPERATION (CONT) Erase remote controls To erase unwanted remote control(s), first erase all remote controls, then learn the ones you would like to keep. To erase remote control(s) 1. Press and hold the learn button for approx 10 seconds. 2. The LED will flash rapidly after 10 seconds to indicate all the pro- grammed remote controls have been erased. You may now release the learn button. TM 3. You have erased all the remote controls in the Smart Button . 4. BATTERY 12 volt alkaline battery (