ملخص المحتوى في الصفحة رقم 1
DVD Navigation System with 6.5" Wide TFT Display and Dual-DVD Multi-Source Receiver
MODEL
INSTALLATION MANUAL
Be sure to read this installation manual thoroughly prior to installation and making connections. If
installation methods or non-standard parts not specified in this installation manual are used, accidents
or injury may result.
Professional installation is recommended, contact the place of purchase to schedule an appointment.
After reading the owner's manual and the installation manual t
ملخص المحتوى في الصفحة رقم 2
Components Check that all of the following components are present Components Check that all of the following components are present Main unit components 1 Main unit x 1 2 Interconnecting wires 3 Interconnecting wires 4 Interconnecting wires (Power and front speaker (Rear speaker wires) (Sub-woofer, line out, and steering wires) (6P) x 1 remote control connector) (10P) x 1 (20P) x 1 5 Interconnecting wires Interconnecting wires 7 Interconnecting wires 6 Hex-head bolt 8 (Speed pulse, parking b
ملخص المحتوى في الصفحة رقم 3
For your safety in using the AVN6000 For your safety in using the AVN6000 Warnings and caution signs, illustrated below, are posted throughout this manual as well as on the AVN6000. They show safe and correct ways to handle the main unit to prevent personal injury to you and others and avoid damage to property. Before reading through the manual, take time to read through and learn the important information listed in this section. This "Warning" sign indicates a situation in which incorrect handl
ملخص المحتوى في الصفحة رقم 4
• • Do not place the vinyl storage bag over a person's • • Do not operate the main unit in a malfunctioning head. It may cause a serious accident or death by condition, for instance, when the audio does not play. suffocation. Doing so may result in an accident, fire, or electrical shock. • • Do not disassemble or rebuild this main unit. Doing so may cause an accident, fire, or electrical shock. • • If an abnormal situation occurs, such as foreign matter entering or liquid splashing on the main u
ملخص المحتوى في الصفحة رقم 5
Installation Diagram Installation Diagram 12 GPS antenna (When installing inside the vehicle) Tip 12 GPS antenna (When installing outside the vehicle) Main unit 1 Tip • • If installing the GPS antenna inside the vehicle, the location and the slope of the vehicle's windscreen will determine the accuracy of the GPS antenna to receive the GPS signal. If the GPS antenna location inside the vehicle is hindering the accuracy of the GPS antenna, then you may want to install the antenna outside the vehi
ملخص المحتوى في الصفحة رقم 6
Name and functions of terminals Name and functions of terminals • • Never cut the insulation on the power wire or use it to power any other equipment. If the rated current capacity of the power wire is exceeded, fire and electric shocks may result. • • The wires should be secured with tape or a similar securing method to prevent any obstructions while driving. If they get wound or entangled around components such as the steering wheel, shifting lever, or brake pedal, accidents may result. • • If
ملخص المحتوى في الصفحة رقم 7
2,,,, 3 4 , Wire colours and connection points for interconnecting wires 5 6 and 7 Never connect the power supply to the speaker wires (No.6 and No.7), otherwise it will cause damage to the main unit. Caution 1 B+ (Yellow) Connect where power is constantly available, regardless of the ignition key's position. 2 ACC (Red) Connect where the power comes on when the ignition is in the ACC position. 3 Illumination power supply (Orange/White) Connect to where power comes on when the vehicle light swit
ملخص المحتوى في الصفحة رقم 8
VCR output terminals G Connect to a monitor with video input. Yellow : Video signal White : Audio(left) signal Red : Audio(right) signal VCR input terminals H Connect to the output wire of an external video main unit such as a VCR. Yellow : Video signal White : Audio (left) signal Red : Audio (right) signal Main unit connections 13 ACC ON/OFF power supply terminal (blue/white) If you use this terminal to connect a main unit such as an external amplifier, you can still hear the audio gu
ملخص المحتوى في الصفحة رقم 9
- Vehicle connections - Tip • •You will need to purchase the necessary vehicle component adapter wire for the vehicle so that the power supplies can be utilized. (Contact the dealer for further details.) • • Be sure to wrap the interconnecting wires with electrical tape or use another insulation method to insulate them. - Example of using vehicle adapter wires - Vehicle harness Power supplies for combined equipment From main unit Vehicle component adapter wires - - 9
ملخص المحتوى في الصفحة رقم 10
Connecting the vehicle speed pulse, parking Connecting the vehicle speed pulse, parking brake, and reverse wires brake, and reverse wires Notes on installation • • Check the vehicle speed pulse signal, parking brake signal, and reverse signal carefully before making the connections. If the wires are incorrectly connected, accidents or problems with correct operation may result. • • The label on the vehicle speed pulse signal wire contains a protection circuit, so do not cut the wire or remove th
ملخص المحتوى في الصفحة رقم 11
- Connecting point for parking brake signal (example) - Hand-operated Use a splicing connector to connect the parking 1 parking brake brake signal wire (red/white) coming from the main unit to the parking brake signal wire of the vehicle. Route the parking brake signal wire to the main 2 unit. Attach a splicing Parking brake connector at this location. signal Wire Parking brake signal wire Foot-operated parking brake - Connecting point for reverse signal (example) - Tip Attach a splicing connect
ملخص المحتوى في الصفحة رقم 12
System connection example System connection example • • Never cut the insulation on the power wire or use it to power any other main unit. If the rated current capacity of the power wire is exceeded, fire and electric shocks may result. • • The wires should be secured with tape or a similar securing method to prevent any obstructions while driving. If they get wound or entangled around components such as the steering wheel, shifting lever, or brake pedal, accidents may result. • • If removing th
ملخص المحتوى في الصفحة رقم 13
Installing the GPS antenna Installing the GPS antenna Notes on installation • • The wires should be bound together with tape or a similar securing method (example: wire ties) so that they do not interfere with driving. If they become wound or entangled around parts such as the steering wheel, shifting lever, or brake pedal, accidents may result. • •Do not install the GPS antenna where it will obstruct the driver's vision or where it will be an obstacle while driving, otherwise traffic accidents
ملخص المحتوى في الصفحة رقم 14
- Installation inside the vehicle (example) - Choose an installation location on the dashboard 1 which is flat and has a clear view of the sky. Tip 12 Earthing plate 12 GPS antenna • • Select a location that is at least 20 cm (8 in). away from the main unit. If this is not done, the GPS measurement precision will drop. • • Be sure to use the earthing plate when installing the GPS antenna. If the earthing plate is not used, the reception sensitivity will drop and will affect the accuracy of the p
ملخص المحتوى في الصفحة رقم 15
- Installation outside the vehicle (example) - Choose an installation location where the GPS 1 antenna can be attached securely. Remove the backing paper from the body 2 GPS antenna 12 protective sheet and attach the sheet to the Body protective 15 sheet (clear) vehicle. Install the GPS antenna on top of the body 3 protective sheet. Front of vehicle Route the GPS antenna wire inside the vehicle's 4 Tape 13 Waterproof cushion boot and secure it with tape. Attach the waterproof cushion so that the
ملخص المحتوى في الصفحة رقم 16
Installing the main unit Installing the main unit - Installation angle - Tip To maintain proper function, the main unit must be Front mounted at an angle of less than 30 degrees. If the angle is in excess of 30 degrees, DVD/CD skipping and improper DVD/CD ejection may occur. 30˚ or less Level (reference) - Mounting the main unit - Tip Centre cluster panel • •Carefully bind any excess length of wire that Pocket, etc is connected to the main unit and secure it to an area of empty space in the veh
