ملخص المحتوى في الصفحة رقم 1
GPS 400
Pilot’s Guide and Reference
ملخص المحتوى في الصفحة رقم 2
ملخص المحتوى في الصفحة رقم 3
RECORD OF REVISIONS Revision Date of Revision Description A 8/99 Initial Release B 8/00 Revised and Redrawn Changed to 8 inch x 8.5 inch format. Added TERRAIN, C 11/06 Additional Features section, and misc. changes D 2/07 Updated per Main SW v5.02 E 10/07 Updated per Main SW v5.03 F 05/08 Removed Proximity Advisory info from Section 10 G 08/08 Converted format of figures to accommodate printing process H 12/09 Added Section 10.2, GTS 8XX Traffic Systems 190-00140-60 Rev. H GPS 400 Pilot’s Gui
ملخص المحتوى في الصفحة رقم 4
COPYRIGHT Copyright © 2009 Garmin Ltd. or its subsidiaries. All rights reserved. This manual reflects the operation of Main System Software version 5.03 or later. Some differences may be observed when comparing the information in this manual to other software versions. Garmin International, Inc., 1200 East 151st Street, Olathe, Kansas 66062 USA p: 913.397.8200 f: 913.397.8282 Garmin AT, Inc., 2345 Turner Road SE, Salem, Oregon 97302 USA p: 503.391.3411 f: 503.364.2138 Garmin (Europe)
ملخص المحتوى في الصفحة رقم 5
TABLE OF CONTENTS SECTION 1: INTRODUCTION ........................................... 1-1 SECTION 7: NRST PAGES ................................................. 7-1 1.1 Accessories and Packing List ................................. 1-1 7.1 NRST Page Group ..................................................... 7-1 1.2 Key and Knob Functions ......................................... 1-2 7.2 Nearest Airport Page ............................................... 7-4 1.3 Takeoff Tour ...........
ملخص المحتوى في الصفحة رقم 6
WARNINGS, CAUTIONS, AND NOTES WARNING: Navigation and terrain separation must NOT be predicated upon the use of the TerraiN function. The TerraiN feature is NOT intended to be used as a primary reference for terrain avoidance and does not relieve the pilot from the responsibility of being aware of surroundings during flight. The TerraiN feature is only to be used as an aid for terrain avoidance and is not certified for use in applications requiring a certified terrain awareness system.
ملخص المحتوى في الصفحة رقم 7
WARNINGS, CAUTIONS, AND NOTES WARNING: Use the GPS 400, Weather Data Link interface, TiS, and TerraiN at your own risk. To reduce the risk of unsafe operation, carefully review and understand all aspects of the GPS 400 Pilot’s Guide documentation and the Flight Manual Supplement. Thoroughly practice basic operation prior to actual use. During flight operations, carefully compare indications from the GPS 400 to all available navigation sources, including the information from other NaVai
ملخص المحتوى في الصفحة رقم 8
WARRANTY AVIATION LIMITED WARRANTY All Garmin avionics products are warranted to be free from defects in materials or workmanship for: two years from the date of purchase for new Remote-Mount and Panel-Mount products; one year from the date of purchase for new portable products and any purchased newly-overhauled products; six months for newly-overhauled products exchanged through a Garmin Authorized Service Center; and 90 days for factory repaired or newly-overhauled products exchanged at Gar
ملخص المحتوى في الصفحة رقم 9
SECTION 1 INTRODUCTION The Garmin dealer installs and configures the GPS SECTION 1: INTRODUCTION 400. The GPS 400 is secured in the installation rack with the proper wiring connections performed. After installation, the NavData Card and the TERRAIN Data 1.1 ACCESSORIES AND PACKING LIST Card are installed into their correct slots on the front of Congratulations on choosing the finest, most advanced the unit (see Appendix A). A Garmin dealer can answer panel mount IFR navigation/comm
ملخص المحتوى في الصفحة رقم 10
SECTION 1 INTRODUCTION Experiment with the unit and refer to the reference 1.2 KEy AND KNOB FUNCTIONS sections for more information. The GPS 400 is designed to make operation as simple Data is entered using the large and small knobs. as possible. The key and knob descriptions (Figure Experiment with them to become efficient at entering data. 1-1) provide a general overview of the primary function(s) This greatly reduces the amount of time spent operating for each key and knob. The
ملخص المحتوى في الصفحة رقم 11
SECTION 1 INTRODUCTION (15) Small Right Knob (CRSR) – Used to select pages Left-hand Knob within one of the groups listed above. Press this knob (1, 3) – See Appendix A for NavData and TERRAIN momentarily to display the on-screen cursor. The cursor Data Card insertion and removal. allows the pilot to enter data and/or make a selection from (2) Power Knob – Controls unit power, turn clockwise a list of options. When entering data, the small knob is to turn the unit on. used to select
ملخص المحتوى في الصفحة رقم 12
SECTION 1 INTRODUCTION Bottom Row Keys NOTe: When the GPS 400 displays a list of information that is too long for the display (9) NRST Key – Displays the Nearest Airports Page. screen, a scroll bar appears along the right-hand Then, turning the small right knob steps through the side of the display (Figure 1-3). The scroll bar NRST pages. graphically indicates the number of additional (10) OBS Key – Selects OBS mode, which retains the items available within the selected category. T
ملخص المحتوى في الصفحة رقم 13
SECTION 1 INTRODUCTION After becoming familiar with the basics, some suggested 1.3 TAKEOFF TOUR reading within this Pilot’s Guide includes: Overview • Flight plan features - Section 4 The Garmin GPS 400 provides the pilot accurate • IFR procedures - Section 5 navigational data, along with non-precision and precision • Waypoint information pages (database approach certification in the IFR environment. The takeoff information) - Section 6 tour is designed to familiarize the pilot with: • U
ملخص المحتوى في الصفحة رقم 14
SECTION 1 INTRODUCTION The Database Versions Page (Figure 1-5) appears To ensure that the GPS 400 and any connected next, which shows the current database information instruments are working properly, check for the following on the NavData Card and Terrain Data cards. Database indications on the CDI/HSI, RMI, external annunciators, information highlighted in yellow indicates the database and other connected instruments: is not within its effective dates. The NavData database is • Course d
ملخص المحتوى في الصفحة رقم 15
SECTION 1 INTRODUCTION Viewing the Checklists Page: 1) Turn the large right knob to highlight ‘Go To Chklist?’ (Figure 1-9) and press the ENT Key. Figure 1-7 Fuel Flow Selected The Instrument Panel Self-test Page includes selections to set fuel on board (FOB) to full capacity and access the Checklists Page. This allows the pilot to quickly set fuel Figure 1-9 ‘Go To Chklist?’ Highlighted to full limits and display any checklists that have been entered, such as start up or takeoff che
ملخص المحتوى في الصفحة رقم 16
SECTION 1 INTRODUCTION Viewing a system message: Satellite Status Page Press the MSG Key (Figure 1-11). The Satellite Status Page (Figure 1-10) appears as the GPS 400 attempts to collect satellite information. The Message Page appears and displays the status or An ‘Acquiring’ status is displayed on the Satellite Status warning information applicable to the receiver’s current Page, and the signal strengths of any satellites received operating condition. appear as ‘bar graph’ readings. Thi
ملخص المحتوى في الصفحة رقم 17
SECTION 1 INTRODUCTION Page Groups NOTe: The NrST Page Group may be accessed by using the large right knob as described in the Page Groups preceding procedure or by pressing the NRST NAV Group WPT Group AUX Group NRST Group Key. see Section 2 see Section 6 see Section 8 see Section 7 NAV Pages Table 1-1 Page Groups There are seven pages available under the NAV Page The bottom right corner of the screen (Figure 1-12) Group*: indicates which page group (Table 1-1) is currently being • De
ملخص المحتوى في الصفحة رقم 18
SECTION 1 INTRODUCTION To change the map range, press the up arrow (to zoom Map Page out) or the down arrow (to zoom in) of the RNG (map After the GPS 400 acquires satellites and computes range) Key. The current map range is depicted in the a position, the Map Page (Figure 1-13) appears lower left corner of the Map Display. automatically. Direct-to Navigation Map Display Desired Track Map Range Present Position Data Fields The GPS 400 can use direct point-to-point navigation to provide g
ملخص المحتوى في الصفحة رقم 19
SECTION 1 INTRODUCTION 5) Press the ENT Key to confirm the identifier. The The Default NAV Page displays a graphic course ‘Activate?’ function field is highlighted (Figure deviation indicator (CDI), the active leg of the flight plan 1-15). (as defined by the current ‘from’ and ‘to’ waypoints), and six user-selectable data fields. The default settings for these fields are distance to waypoint (DIS), desired track (DTK), bearing to waypoint (BRG), ground speed (GS), ground track (TRK), a
ملخص المحتوى في الصفحة رقم 20
SECTION 1 INTRODUCTION Displaying the frequency list for the NAV/COM Page desired flight plan or direct-to airport: From the Default NAV Page, simply turn the small 1) Press the small right knob to activate the right knob until the NAV/COM Page (Figure 1-19) is cursor on the airport identifier field (in the GPS displayed. Window). Departure, Enroute, or Frequency List 2) Turn the small right knob to display the list Arrival Airport of airports (departure, arrival, and enroute) for the f
