Garmin 3006C دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

GPSMAP 2x06/2x10/3x06/3x10
FLUSH MOUNT TEMPLATES
TRIM TEMPLATE ALONG THIS LINE TO AID FITTING
7.5" (190 mm)
GPSMAP 2006/2006C/2106/2206/3006C/3206
UNIT OUTLINE
To flush mount the GPSMAP 2006/2006C/2106/2206/3006C/3206:
1. Trim the flush mount template and tape it in the preferred location.

2. Using the center punch, indent the center of each mounting hole location.
3. Using an 1/8" (3 mm) drill bit, drill the four mounting holes. (Drilling the mounting
CUT MOUNTING SURFACE
holes befor

ملخص المحتوى في الصفحة رقم 2

TRIM TEMPLATE ALONG THIS LINE TO AID FITTING 9.05" (230 mm) GPSMAP 2010/2010C/2110/2210/3010C/3210 CUT MOUNTING SURFACE ALONG INSIDE OF THIS LINE. Be very careful when cutting this hole, because there is only a small amount of clearance between the unit and the mounting hole. To flush mount the GPSMAP 2010/2010C/2110/2210/3010C/3210: 1. Trim the flush mount template and tape in the preferred location. 2. Using the center punch, indent the center of each mounting hole location. 3. Using an