Klaxon GP10 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

GP6, GP10 and GP12 Sirens

INSTALLATION AND MAINTENANCE

1. Installation

a. Fix siren to a firm level base at a minimum height of 3m above the ground and free
of side or top obstructions.

b. For best all round sound propagation mount the unit at a height of 4.5 to 6m with
50m clear radius all round.

c. Figure 1 overleaf shows a polar plot of the sound output from the sirens in free
space.

Please note that the propagation of sound in air is affected by the following f

ملخص المحتوى في الصفحة رقم 2

e. This equipment should only be connected to the supply voltage marked on the rating plate. f. WARNING: The equipment should be protected from access by persons, animals or foreign bodies to avoid injury to persons or damage to equipment affecting safe use. g. WARNING: This equipment contains rotating parts. Please ensure that the retaining straps on the rotor are left in place until the installation is complete and the equipment is ready to be tested for the first time. h. WARNI

ملخص المحتوى في الصفحة رقم 3

GP6 and GP10 Single Ended Sirens - Polar Plot of Sound Output (dBA @ 1m) 0 150 345 15 330 30 145 315 45 140 300 60 135 130 285 75 125 GP6 Siren 270 120 90 GP10 Siren 255 105 240 120 225 135 210 150 195 165 180

ملخص المحتوى في الصفحة رقم 4

GP12 Double Ended Siren – Polar Plot of Sound Output (dbA @ 1m) 0 15 345 30 330 315 45 60 300 285 75 270 90 255 105 240 120 135 225 210 150 195 165 180