SECO-LARM USA Covert PIR Camera EV-5120-P3WQ 480 TV Lines دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Covert PIR Camera
(Non-Functioning PIR)


Manual

Model Resolution Video Output
EV-5120-N3WQ 480 TV Lines NTSC
EV-5120-P3WQ 480 TV Lines PAL
EV-5620-N3WQ 600 TV Lines NTSC
EV-5620-P3WQ 600 TV Lines PAL

Camera is covertly hidden in a 3.7mm lens (78° viewing angle)
non-functioning PIR sensor housing 480 or 600 TV lines
1
/ ” Sony Super HAD II CCD Low current draw: 200mA
3





Note: Model numbers that end with “Q” or that have a round green “Q” sticker signify

ملخص المحتوى في الصفحة رقم 2

ENFORCER Covert PIR Camera Specifications: EV-5120-N3WQ EV-5120-P3WQ EV-5620-N3WQ EV-5620-P3WQ Type PIR Camera 1 CCD /3” Sony Super HAD II CCD Resolution 480 TV Lines 600 TV Lines Video output format NTSC PAL NTSC PAL Pickup elements 510x492 pixels 500x582 pixels 768x494 pixels 752x582 pixels Video output 1.0Vp-p composite video, 75Ω Scanning system 2:1 Interlace Lens 3.7mm Pinhole Viewing angle 78° Minimum illumination 0.1 Lux at F/1.2 S/N ratio >48dB (AGC Off) Gain C

ملخص المحتوى في الصفحة رقم 3

ENFORCER Covert PIR Camera Overview: Slide camera downward onto the mounting bracket Important: Mounting bracket Do not cut the DC jack or the female BNC connector as this will void the warranty. Camera Female BNC connector DC Plug with terminal block DC jack Before Starting: 1. Please read this manual carefully and 5. Do not mount the camera in areas keep it for future reference. exposed to radiation, strong magnetic 2. Use the camera within given temperatur

ملخص المحتوى في الصفحة رقم 4

ENFORCER Covert PIR Camera Troubleshooting: Check that the camera is powered up. Check that the power supply’s polarity is correct. The screen is blank. Check that the monitor is powered up. Check that the video cable connecting the camera to the monitor is connected properly. Clean the lens using a soft, clean cloth. The screen image is dim Check that the light source is adequate. Adjust the monitor’s contrast knob. The screen image has poor contrast. Change the positi