SkyLink OTODOR PS-201 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Motion Sensor
Model PS-201
1. INTRODUCTION
2. INSTALLATION (CONT)
The Motion Sensor is designed to activate the Skylink’s swing door
Walk Test
opener automatically when it senses motion nearby the door. The door
will stay open for a period of time then closes if no further movement is
After mounting the motion sensor, it is important to test the coverage of
detected.
the motion sensor. In order to control how far the sensor can “see”, this
In this package, you should find a Motion Sensor
can be

ملخص المحتوى في الصفحة رقم 2

3. OPERATION (CONT) 3. To change the setting, press the door setting button once will advance the timer by 10 seconds. i.e. if the original timer setting is at 10 seconds, pressing the door setting button once will result in 20 seconds, and you will then hear 2 beeps. The timer setting will be back to 10 seconds if you press the door setting button when the timer setting is at 50 seconds. 4. Once you have selected the desired setting, press and hold the door setting button for 3 seconds, you w