Pelco MR3050 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

C220M-C (7/99)
MR3000/MR3050
Universal Monitor Mount
®
3500 Pelco Way, IMPORTANT SAFEGUARDS AND WARNINGS
Clovis, CA 93612-5699
Prior to installation and use of this product, the following WARNINGS should be observed.
USA
1. Installation and servicing should only be done by qualified service personnel and conform
In North America & Canada:
to all local codes.
Tel (800) 289-9100
FAX (800) 289-9150
2. Installation shall be done in accordance with all local and national electrical and mechanical
Int

ملخص المحتوى في الصفحة رقم 2

8. Attach the monitor to the base. If the monitor has removable rubber feet, remove the screws from the monitor feet and remove the feet. Use the same hardware to attach the monitor to the base. 9. Make any final adjustments in the pan angle of the assembly, then tighten set screws in upper part of collar to lock mount and collar in place. 10. Tilt the monitor to the desired angle and tighten bolts on each side of the side brackets. 11. Make all necessary electrical connections.

ملخص المحتوى في الصفحة رقم 3

Figure 1. MR3000/MR3050 Exploded Assembly Diagram Table A. MR3000/MR3050 Exploded Assembly Parts List Item Qty. Description Part Number 12 Base MR3000 MR30004000COMP MR3050 MR30504001COMP 22 Adjustable side bracket MR3000 MR30004001COMP MR3050 MR30504003COMP 31 Crossbar MR3000 MR30004005COMP MR3050 MR30504000COMP 41 Collar adapter MR30004103COMP 51 Lock nut ZH1/213NUTCHN 62 Set screw, 1/4-20 x 1/4-inch ZH1/420X.250S 76 Screw, hex head, 1/4-20 x 1/2-inch ZH1/4-20X.500CH 86 Flat

ملخص المحتوى في الصفحة رقم 4

SPECIFICATIONS Tilt Angle: Adjustable ±45° Maximum Load MR3000: 40 lb (18 kg) MR3050: 65 lb (29.45 kg) Construction: Steel Finish: Black polyester powder coat Dimensions: See Figure 2 Unit Weight MR3000: 12 lb (5.44 kg) MR3050: 20 lb (9.07 kg) (Design and product specifications subject to change without notice.) Figure 2. MR3000/MR3050 Dimension Drawing WARRANTY AND RETURN INFORMATION WARRANTY If a warranty repair is required, the Dealer must contact Pelco at (800) 289-9100 or Pelco will repair