ملخص المحتوى في الصفحة رقم 1
Media Components
TM
Fusion Remote /Fusion Remote Black
User’s Manual
Manuel de l’utilisateur
Anwenderhandbuch
Manuale per l’operatore
Manual del usuario
ملخص المحتوى في الصفحة رقم 2
At Antec, we continually refine and improve our products to ensure the highest quality. As such, it’s possible that your new case may differ slightly from the description in this manual. This isn’t a problem; it’s simply an improvement. As of the date of publication, all features, descriptions, and illustrations in this manual are correct. Disclaimer This manual is intended only as a guide for Antec’s Computer Enclosures. For more comprehensive instructions on installing the motherboard and
ملخص المحتوى في الصفحة رقم 3
2. Make sure you have the correct I/O panel for your motherboard. If the panel provided with the case isn’t suitable, please contact your motherboard manufacturer for the correct I/O panel. 3. Line up your motherboard with the standoff holes, and remember which holes are lined up. Not all motherboards will match with all the provided holes; this is normal and won’t affect functionally. 4. Remove your motherboard by lifting it up. 5. Screw the brass standoffs into the threaded holes
ملخص المحتوى في الصفحة رقم 4
Motherboard USB Pin Layout 12 Pin Signal Names Pin Signal Names USB Power 1 USB Power 2 1 2 Negative Signal 1 Negative Signal 2 3 4 Positive Signal 1 Positive Signal 2 5 6 Ground 1 Ground 2 7 8 9 Key (No Connection) 10 Empty Pin 9 10 Connecting the IEEE 1394 (FireWire®, i.Link®) Port You will find a single 10-pin connector on a cable attached to the front IEEE 1394 connection. This is an Intel® standard connector that is keyed so that it can’t be accidentally reversed when connected to a prope
ملخص المحتوى في الصفحة رقم 5
Pin Assignment for Audio Ports (HDA and AC’97) Pin Signal Names Pin Signal Names (HDA) (AC’97) 1 MIC2 L 1 MIC In 2 AGND 2 GND 3 MIC2 R 3 MIC Power 10 6 4 2 4 AVCC 4 NC 5 FRO-R 5 Line Out (R) 9 7 5 3 1 6 MIC2_JD 6 Line Out (R) 7 F_IO_SEN 7 NC 8 Key (no pin) 8 Key (no pin) 9 FRO-L 9 Line Out (L) 10 LINE2_JD 10 Line Out (L) Locate the internal audio connectors from your motherboard or sound card. Consult your motherboard or sound card manual for the pin-out positions. The Display/Volume Contro
ملخص المحتوى في الصفحة رقم 6
c. Navigating iMEDIAN HD Use the 4-way buttons to navigate iMEDIAN HD. Holding the left and right buttons will take you to the “Home” and “Menu” screens d. Local Media Users can easily enjoy music, videos, and pictures on their PC by using just the remote control. IMEDIAN HD supports every essential internal codec. e. Network Media Users can easily enjoy media files on other local PCs as well as Inter- net radio. f. CD/DVD Users can listen to CDs or watch DVDs g. TV U
ملخص المحتوى في الصفحة رقم 7
Note: The upper 5.25” drive bay is reserved for LCD. Do not mount any device into this bay. 3. Find a 4-pin molex or SATA connector on the power supply and connect it to the power connector on the device. Cooling System The 120mm TriCool™ fans The Fusion Remote comes with two 120mm TriCool™ exhaust fans preinstalled at the side of the case inside the motherboard chamber. These two fans are next to the CPU for effective CPU cooling and have a three-speed switch that allows you choose betwee
ملخص المحتوى في الصفحة رقم 8
CPU Air Guide The CPU Air Guide should be used to direct fresh air from the rear air intake to the CPU cooler to enhance the CPU cooling. Adjust the CPU Air Guide by adding or removing stacking sections to best suit different motherboard CPU positions. The Power Supply Air Intake There are vents on the left side of the case to bring cool air into the power supply chamber to cool the power supply. Note: Please leave at least 1” (2.5cm) between the left side of the case and anything that coul
ملخص المحتوى في الصفحة رقم 9
RM200 1. Application Exit: Close the active window or close iMEDIAN HD [ALT + F4] 2. Power: Turn the PC on/off (Power switch also located on the internal receiver) 3. Record 4. Media Control Group 1: Play/Pause/Stop/Open/Prev/Next/Rew/F.Fwd 5. Mouse/Keyboard: Switch the PAD controller between a mouse and a keyboard 6. Backspace: View previous menu 7. Select/Space 8. PAD Controller: Mouse cursor control & 4-way 12 arrow keys 9. Windows Start 3 4 10. Windows Menu 11. Mouse left click 5 12. Mouse
ملخص المحتوى في الصفحة رقم 10
Antec, Inc. 47900 Fremont Blvd. Fremont, CA 94538 USA tel: 510-770-1200 fax: 510-770-1288 Antec Europe B.V. Stuttgartstraat 12 3047 AS Rotterdam The Netherlands tel: +31 (0) 10 462-2060 fax: +31 (0) 10 437-1752 Customer Support: US & Canada 1-800-22ANTEC customersupport@antec.com Europe +31 (0) 10 462-2060 europe.techsupport@antec.com www.antec.com © Copyright 2008 Antec, Inc. All rights reserved. All trademarks are the property of their respective owners. Reproduction in whole or in part withou
