American Standard In-Wall Diverter 1660.431 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Installation
Instructions
THREE WAY:
SHOWER SYSTEMS 1660.300
1660.430
1660.431
TWO WAY OR THREE WAY
TWO WAY:
IN-WALL DIVERTER
1660.200
1660.440
1660.441
Thank you for selecting American-Standard...the benchmark
Certified to comply with ANSI A112.18.1M
of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--please
50321B
read these instructions carefully before you begin.
ROUGHING-IN DIMENSIONS
NOTE: NO CONCEALED PIPING FURNISHED
CAUTION: DO NOT SEAL ANY OUTLETS.

ملخص المحتوى في الصفحة رقم 2

MAX ROUGHING-IN CAUTION 1 Turn off hot and cold water supplies before beginning. See Roughing-in Drawing on reverse side. The port with the BATH TUB picture is the high flow. The DIVERTER can be installed with the inlet rotated in any position. Supply connections are 1/2" NPT connections. For proper positioning the finished wall must be within side of PLASTER GUARD. Connect water to valve. The reverse side of the body is marked with arrows. CAUTION: Do not solder near the VALVE. Damage to the SE