American Standard Retrospect Round Front Toilet none دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

INSTALLATION INSTRUCTIONS
Wall Hung Bathroom Sink
*NOTE: For installation of models using concealed or exposed arms, follow instruction
provided by arms manufacturer.
Introduction: Thank you for selecting our products...products which have been the benchmarks of fine quality for years. To help
insure that the installation process will proceed smoothly, please read these instructions carefully before you begin. Also, review
the recommended tools and materials list; carefully

ملخص المحتوى في الصفحة رقم 2

5 7 Return the fitted lavatory to the installed position. Affix hanger to wall (hand tighten only). Mount lavatory for Connect trap to drain assembly hand tight to check positioning, level the deck, and mark bottom anchor screw alignment. It may be necessary to cut off part of the holes (if applicable). Remove lavatory, tighten the hanger tailpiece (area "B") or part of the horizontal leg of the positioning screws and drill pilot holes for anchor screws trap (area "C"). and 4 mounting s