American Standard Retrospect Collection Right Heigh Elongated Toilet 2405.016 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

INSTALLATION INSTRUCTIONS
Models 2405.016 and 2408.016
Retrospect Two Piece Toilet
Thank you for selecting American Standard - the benchmark of fine quality for over 100 years. To ensure this product
is installed properly, please read these instructions carefully before you begin. (Certain installations may require
professional help.) Also be sure your installation conforms to local codes.
!
CAUTION: PRODUCT IS FRAGILE. TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE WITH CARE!
NOTE: P

ملخص المحتوى في الصفحة رقم 2

8 5 INSTALL TOILET SEAT NUT Install toilet seat in accordance with manufacturer's directions. TAPERED WASHER 9a Before continuing, determine the type of water supply connecation you have from the chart below and use the appropriate CLOSET BOLT assembly parts required to properly reconnect the water supply. DO NOT use FLANGE plumber's putty to seal these fittings. POSITION TOILET ON FLANGE METAL/COPPER METAL FLANGED METAL SPIRAL VINYL/BRAIDED a. Unplug floor waste opening and install to

ملخص المحتوى في الصفحة رقم 3

10 11 ARM TOP REFILL TUBE ADJUSTMENTS NIPPLE a. Adjust water level. Water level TANK should be adjusted to level LEVER CRITICAL LEVEL Fig. 10A indicated on tank by adjusting float MARK ("C.L.") MUST BE 1" ABOVE cup. "S" OVERFLOW PIPE FLOAT CLIP CUP See Step 11 for water level FILL adjustment method VALVE FLUSH VALVE b. If bowl fails to siphon, an adjustment WATER LEVEL ADJUSTMENT may be required with the lift chain. CLIP LINK Simply remove the bead chain from the retainment cl

ملخص المحتوى في الصفحة رقم 4

TROUBLESHOOTING FILL VALVE 13 IF FILL VALVE SHUTS OFF BUT CONTINUES TO LEAK SLOWLY, repeat Step 13. IF FILL VALVE TURNS OFF AND ON DURING PERIODS OF NON-USE, it is a signal you are wasting water because: • The end of the refill tube is inserted into overflow pipe, below LIFT ARM LIFT ARM water level in tank. Attach refill tube to overflow pipe using "S" FIRST FIRST clip provided. • The flush valve is leaking because it's worn, dirty or misaligned with tank ball or flapper (replace with a n