American Standard T480.500 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Installation
Instructions
1480.500
TM
1480SS.500
T480.500
PRESSURE BALANCED
BATH AND SHOWER
FITTINGS
Thank you for selecting American-Standard...
the benchmark of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--
Certified to comply with ANSI A112.18.1
please read these instructions carefully before you begin.
U.S. Patent No. D400,652
M968395 Rev. 1.1
ROUGHING-IN DIMENSIONS
To assure proper positioning in
relation to wall, note roughing-in
SHOWER
dimensions.
FL

ملخص المحتوى في الصفحة رقم 2

Turn off water at MAIN supply. To prevent damage temporarily FLANGE 1 CAUTION remove STOPS when water supply lines are soldered to the manifold. NOTE SHOWER When soldering, remove PLASTER GUARD, CARTRIDGES and CHECK STOPS (IF PRESENT). When HEAD finished soldering, flush valve body, replace cartridges, check stops (if present) and plaster guard to continue installation. Use thread sealant or Teflon tape on threaded connections BRACE (4) * SHOWER ROUGHING-IN RISER ARM PIPE * See Roughing-in diagram