ملخص المحتوى في الصفحة رقم 1
Crestron PMK-6X-DSW
Pre-Construction Wall Mount Kit for
TPS-6X-DSW
Installation Guide
ملخص المحتوى في الصفحة رقم 2
Crestron PMK-6X-DSW Pre-Construction Wall Mount Kit for TPS-6X-DSW Contents Pre-Construction Wall Mount Kit for TPS-6X-DSW: PMK-6X-DSW 1 Description.................................................................................................................................1 Setup ..........................................................................................................................................4 Mounting .............................................................
ملخص المحتوى في الصفحة رقم 3
Crestron PMK-6X-DSW Pre-Construction Wall Mount Kit for TPS-6X-DSW Pre-Construction Wall Mount Kit for TPS-6X-DSW: PMK-6X-DSW Description The PMK-6X-DSW is a pre-construction mount kit for the TPS-6X-DSW Wall Mount Docking Station. The PMK-6X-DSW is used for installation on a stud. For custom placement of the TPS-6X-DSW without a stud, use the WMKT-6X-DSW or WMKM-6X-DSW. The PMK-6X-DSW includes a 12-inch long, 18 AWG jumper wire to secure docking station cabling prior to drywall install
ملخص المحتوى في الصفحة رقم 4
Pre-Construction Wall Mount Kit for TPS-6X-DSW Crestron PMK-6X-DSW The dimensions of the PMK-6X-DSW are shown below and on the following page. Dimensional Drawing (1 of 2) 0.56 in (1.42 cm) 11.90 in (30.23 cm) 8.00 in (20.32 cm) 0.06 in (0.15 cm) #06-32 TAPPED HOLE IN EACH CORNER 8.82 in (22.41 cm) 6.35 in (16.13 cm) SECURE 18 AWG JUMPER WIRE IN NOTCH TO HANG CABLES AWAY FROM CUTTING TOOLS FOR DRYWALL SCREWS (NOT INCLUDED) FOR DRYWALL NAILS (NOT INCLUDED) 2 • Pre-Construction Wall Mount
ملخص المحتوى في الصفحة رقم 5
Crestron PMK-6X-DSW Pre-Construction Wall Mount Kit for TPS-6X-DSW Dimensional Drawing (2 of 2) 8 15/16 in (226 mm) 7 3/4 in (196 mm) 6 3/4 in (171 mm) 1/2 in (13 mm) 6 in (152 mm) 5 in 1/2 in (127 mm) (13 mm) 1/8 in (4 mm) 3/16 in (5 mm) 6 3/16 in (158 mm) 6 1/8 in (156 mm) 5 13/16 in (148 mm) Dimensional Drawing - Cover Plate 5.85 in (14.86 cm) 4.16 in (10.57 cm) 0.02 in (0.05 cm) Installation Guide – DOC. 6778A Pre-Construction Wall Mount Kit for TPS-6X-DSW: PMK-6X-DSW • 3
ملخص المحتوى في الصفحة رقم 6
Pre-Construction Wall Mount Kit for TPS-6X-DSW Crestron PMK-6X-DSW Setup Mounting The PMK-6X-DSW consists of a single metal plate, which fastens to the stud of a framed wall prior to hanging drywall. Standard drywall nails or screws to attach the PMK-6X-DSW are not supplied (length can vary). The plate is designed to provide the necessary support for the TPS-6X-DSW and can mount to the right or left side of a stud. Confirm that the PMK-6X-DSW is level before applying drywall. Mounting t
ملخص المحتوى في الصفحة رقم 7
Crestron PMK-6X-DSW Pre-Construction Wall Mount Kit for TPS-6X-DSW Mounted View with Cover Plate (Mounting Example Prior to Drywall Installation) NOTE: BE SURE TO LEAVE NOTE: MOUNTING PLATE THE FOUR TAPPED HOLES IS TO BE COVERED WITH ON THE FRONT OF THE DRYWALL AND THEN PLATE EXPOSED TO ACCEPT CUTOUT MADE AROUND THE INSIDE OF THE THE MOUNTING SCREWS. OPENING. SCREWS (4) #06-32 X 1 1/2" PAN, HEAD (2007254 ) METAL COVER PLATE (2022825 ) TO COVER DRYWALL BEFORE TPS-6X-DSW IS INSTALLED
ملخص المحتوى في الصفحة رقم 8
Pre-Construction Wall Mount Kit for TPS-6X-DSW Crestron PMK-6X-DSW Installation Complete the installation by either installing the wall mount docking station, leaving the hole open (if permitted by local building codes) or installing the optional cover plate with the included #06-32 x 1-1/2” screws. If the TPS-6X-DSW is to be installed, refer to the latest revision of the TPS-6X-DSW Operations and Installation Guide (Doc. 6708) for installation instructions. The document is available from
ملخص المحتوى في الصفحة رقم 9
Crestron PMK-6X-DSW Pre-Construction Wall Mount Kit for TPS-6X-DSW Other Mounting Option Accessories If too much of the mounting plate is exposed after the drywall is cut, you may need to patch the area. Crestron provides the following accessories: • MMK-6X-DSW (Doc. 6779) - for larger repairs and to fill in larger irregularities around the opening (requires plastering). • TMK-6X-DSW (Doc. 6780) - for smaller repairs and to provide a smooth edge at the opening. This option provides a fini
ملخص المحتوى في الصفحة رقم 10
Pre-Construction Wall Mount Kit for TPS-6X-DSW Crestron PMK-6X-DSW Resources Industry Compliance As of the date of manufacture, the PMK-6X-DSW has been tested and found to comply with specifications for CE marking. Reference Documents The latest version of all documents mentioned within the guide can be obtained from the Crestron website (www.crestron.com/manuals). This link will provide a list of product manuals arranged in alphabetical order by model number. List of Related Referenc
ملخص المحتوى في الصفحة رقم 11
Crestron PMK-6X-DSW Pre-Construction Wall Mount Kit for TPS-6X-DSW Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact an authorized CRESTRON dealer. Only authorized CRESTRON dealers may contact the factory and request an RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of the
ملخص المحتوى في الصفحة رقم 12
Crestron Electronics, Inc. Installation Guide – DOC. 6778A 15 Volvo Drive Rockleigh, NJ 07647 (2023089) Tel: 888.CRESTRON 01.09 Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice.
