Home Automation 59A00-1 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

HAI UPB™ Lamp Module
Installation and Operating Instructions

For the following Models:

59A00-1 HAI 300W Lamp Module

READ THESE INSTRUCTIONS BEFORE INSTALLING DEVICE

This HAI UPB™ Lamp Module is intended for installation in accordance with the National Electrical Code and local codes and
regulations. Retain these instructions for reference.

ملخص المحتوى في الصفحة رقم 2

INSTALLATION INSTRUCTIONS The HAI UPB™ Lamp Module is simply plugged into a standard 120VAC wall outlet. Load Information The total load of the UPB™ controlled outlet must not exceed 300 Watts. HAI LAMP MODULE OPERATION The HAI Lamp Module has many configurable items that can be set using the UPB™ UPStart configuration software. The following describes the operation of the HAI Lamp Module in its factory default configuration. Lamp Switch Trigger Operation The Lamp Modu

ملخص المحتوى في الصفحة رقم 3

SPECIFICATIONS Incandescent Loads Dimming Yes Inductive Loads Dimming No Fluorescent Loads Non-Dimming Yes (configurable) Power Maximum Dimming 300W Current Maximum Non-Dimming 2.5A Connections Standard receptacle LED Indicator Yes Dimensions 3” x 2” x 1.3” Weight 0.25 lb. Mounting Plug-in Input Power 120 ± 12 VAC Input Frequency 60 ± 3 Hz Operating Temperature -40 °F to 104 °F LIMITED WARRANTY HAI warrants this product against defects in material and workmanship, und