APC RBC18 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

This addendum does not apply to Back-UPS Pro 1000/1400 and Smart-UPS V/S 1000/1400
I. Installation
Follow the installation illustration on the accompanying sheet.
Note: Small sparks at the battery connectors are normal during connection.
II. Post-Installation
Once installed,
allow the unit to charge for five hours. If the unit is an XL model, allow it to charge for
24 hours.
Note: The Smart-UPS will charge whether it is on or off, and will charge whether there is a load
present or not. In situa

ملخص المحتوى في الصفحة رقم 2

C. What happens when the replace battery LED does not clear? If the self test fails:
If the battery capacity is greater than 75%, turn the unit off and restart it. When you turn a Smart- UPS on, it will initiate a self-test. After the test completes, the LED should clear.
If the unit fails the self-test again, contact APC Customer Support (email: support.apcc.com or phone: 800-800-4APC). V. Increasing ‘Runtime Remaining’ of the Smart-UPS as viewed through Powerchute PLUS or SmartSlot Access